- Title: Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driverinstall tutorial
- Listed: 09/22/2017 1:52 pm
- ROM Version: N/A
You must be logged for ROM download.
3651 total views, 8 today
6 Total favorites
DESCRIPTION
- Right-click on Start then click on System
- In the System window that opens, in System section, you will find your version of Windows next to System type
To disable Windows 10 64 bit driver signature enforcement:
- On your 64 bit Windows 10 desktop click on Start then on Settings
- Click on Update & security then in the left pane click on Recovery
- Under Advanced startup click on Restart now button
- Click on Troubleshoot then on Advanced options
- Click on Startup Settings then on Restart button
- The computer will restart with the Startup Settings screen
- To disable the driver signature enforcement until next restart press on number key 7 or F7 on your keyboard.
- After restart you can proceed with the unsigned MTK drivers installation for your 64 bit Windows
- After you install the unsigned drivers, to use them again in the future, you have to repeat this procedure
To install the MTK VCOM USB Drivers on 32 & 64 bit Windows 10:
- Download the drivers *.zip archive and extract the folder from inside on to the desktop:
Select Install the hardware that I manually select from a list (Advanced) and then click on Next button
Click on Show All Devices then on Next button
In the Install From Disk windows click on Browse… button
In the next window – Locate file – browse for the folder that you have extracted on the desktop at the beginning
If a red warning window will open, click on Install this driver software anyway
This action will add the following drivers in to the operating system:
- MediaTek DA USB VCOM Port
- MediaTek PreLoader USB VCOM Port – for transferring the firmware to your device
- MTK USB DEBUG Port
- MTK USB Modem Port
- MTK USB port – for transfering PreLoader to your device (and recovery in case of bad or corrupt firmware)
Now we need to remove the device that we have installed but leave the drivers in the operating system.
To do that, in the Device Manager window we expand Ports (COM & LPT) section
Right-click and click Uninstall on the MTK USB Port
- In the Confirm Device Uninstall window make sure that the box Delete the driver software for this device is empty
- You need to leave the drivers in the operating system and only remove the device that you added
- Click on the OK button to finalise
※Please make a backup of your device before installing or updating ROM
Donate with PayPal to Wajid |
09/17/2015
awesome post for begineers
09/27/2013
Pelase don't post old driver (2015/09) that require a lot of operation.
On interneta re availabel driver all-in.one 5.1632 that din't require special settings and work from Xp up to Windows 10.
Please post ONLY things if are newer. Thanks.
07/03/2015
all-in.one 5.1632 Driver Not Work Windows 10
07/03/2015
My New Driverinstall tutorial 100% Work in Windows 10
07/03/2015
My New MTK VCOM USB Preloader Drivers 100% Working bro….
09/27/2013
@Wajid_GSM
I'm sorr but driver All-in-One 5.1632 is more recnt than yours and wiorks fine in Windows 10 without need to sign/unsign driver.
I tested on my pc (Windows 10 professional 64bits) and on the pc of a lot of users in italy.
Your process to add manually the driver is based on a very old guide (that you probbaly you got on internet) and old driver (then 5.1632).
The new driver (5.1632) didn't require so lot steps as you explained.
Just require to install it as administrator.
Thanks.
09/27/2013
pelase check here
https://www.needrom.com/downlo.....ler-v5-1453-03/
NEW v5.1632 All Windows
10/17/2017
shioor
01/10/2014
Good job Mr Wajid. Accurate guides can be very difficult to make.
12/11/2017
merci
01/28/2018
thanks for tutorial,cause iam newbe….