DESCRIPTION

ROM Xperia T LT30p – ROM Android 4.1.2 Jelly Bean

Flash xperia T :

1.Extract downloaded fastboot.zip in a folder of your computer and then copy that extracted fastboot folder to the root of C driver (where C is system driver).

2.Now extract pa_mint-2.55-20121205-023445-Utacka.zip, you will get boot.img file within extracted folder. Copy boot.img to fastboot folder.

3.Now turn off your Xperia T. Wait few seconds for complete switch off.

4.Now press and hold Volume Up button while connecting phone to computer. When the LED turn to blue color, you are in fastboot mode. [Note: Use USB port located at back of your desktop computer instead of front USB port]

5.Now open Command prompt as an Administrator (right click on Command prompt and then click on Run as administrator). Once your are in command prompt, input following commands as it is [you should first enter into fastboot folder, we are assuming you are using downloaded fastboot and your fastboot folder is in root of C drive]: 1.cd C:\Fastboot

1.fastboot devices
2.fastboot flash boot boot.img
3.fastboot reboot

Install ROM :

1.Connect your phone to PC using USB cable.

2.Copy downloaded files to the SD card of your phone. Important: Don’t extract any files.

3.Disconnect USB and then turn off your phone.

4.Boot into recovery mode. To do so, reboot phone and press Volume Down button few times while booting. [in recovery use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.

5.Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.

6.Then perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is completed.

7.Select install zip from sdcard, then select choose zip from sdcard. Now, locate the pa_mint-2.55-20121205-023445-Utacka.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.

8.Then perform data wiping task again. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is completed.

10.When everything done, go back to the main recovery menu and select reboot system now to reboot the phone and boot up into customized Android 4.1.2 Jelly Bean ROM Paranoid Android. The first boot will take time, so be patient!

※Please make a backup of your device before installing or updating ROM