- Title: XPERIA Z3 OS port by xblackrazor
- Listed: March, 2015
- Last modified: 03/15/2015 3:05 pm
- Version: 4.4.2
You must be logged for ROM download.
18227 total views, 2 today
1 Total favorites
CUSTOM
Member Info
DESCRIPTION
This ROM for Zopo C2 and ZP980.
Fully multilanguage.
Use TWRP 2.8 for installation.
If not working properly auto-rotate screen or the phone restarts when you double-tap the screen, use a different kernel from the ROM of paolo. Open this ROM https://yadi.sk/d/GY9CA6ErbuVLh and download only kernel, e.g. boot_980a.FHD.img, rename it to boot.img, replace this boot.img in my ROM and install. Check about dt reboot. if phone rebooing again, then download another kernel and try again. Sry for my english)
※Please make a backup of your device before installing or updating ROM
Ciao, bellissima rom.ho riscontrato 2 problemi :uno è quello che con il doppio tap il telefono si spegne,anche se ho risolto installando l’apk kernel tweaker togliendo la spunta sul quadratino ⬜ e mettendo la spunta sul cerchio ⭕ nella voce bouble tape 2 wake,(kernel,bouble tape 2 wake,no ⬜, si ⭕ ). Poi il secondo problema è quello dei sensori di prossimità durante la chiamata che avvicinando l’orecchio il display non si spegne(risolto spegnendo ogni volta il display con tasto power)
Problem with proximity sensor, decides to replace the file in the archive – boot.img; https://yadi.sk/d/_js-szjmfNdS.....x. Or here ready archive spoofed boot.img; https://yadi.sk/d/-0RCY3yffNe8.....S.
Firmware is good. Tested!
That one works perfectly for me. thx dude
Please port for zp810!!!!!
It super ROM, thank you! Who can me say, why autofocus does not work?
да я хз че к чему) у одних камера 8, у других 13 (в том числе и у меня) и автофокус работает
у меня 13 и она как бы работает, но если поднести телефон на 5 см к тексту, начинает ёрзать автофокус и в итоге все плывет…(
Вайпы делал… По работе часто нужно фоткать текст. Может это аппаратный сбой? А сам порт просто великолепен!
A question is decided, there was an instrument room problem. Thank you!
Hi blackrazor.
Did you strip out the Themes section from the ROM?
Also, its missing some of the power saving features. Did you remove that as well?
So far it seems pretty stable. Performance is good too.
hello! I just ported this firmware. but I did't delete anything important.. These functions has not been from the beginning.
OK. thanks for the reply
Hi blackrazor.
Unfortunately this suffers from the same battery issue as the Paolo ROM. Once battery hits 30% it discharges extremely rapidly to zero.
Also, when battery is below 30%, to charge it, I need power off phone and then plug in the power cable.
If I just plug in the power cable when it is on and battery is under 30%, it does not charge the phone.
Is there a fix for that, or does somebody on china-iphone.ru have a fix?
Thx for the good work.
Otherwise it is a really good ROM..
After installing this rom and changing to the proper kernel, the rom seems to work nice but the super lenovo camera doesn't work with this rom, is there anything to make? do you use stock camera or which camera do you recommend?
good work, I often visit the china-iphone.ru but it's a bit difficult to find the thing as I need to use always the translator!
Hi.
If you want to remove some of the bloat from this Z3 ROM, follow this link: http://forum.xda-developers.co.....all-z3-t3019684
Whilst I did not have any issues, make sure to take a backup with CWM/TWRP before.
good job
does this rom support dual sim?