Responses to “Zopo 980+ 6592 GACAMA AOSP”

1. 

   05/06/2013
   

    

   KEgg on 04/20/2014 @ 7:46 pm

   Awesome ROM and beautifully put together. It's great to be able to use Gravity Box via the Xposed Framework.

   The only issue I have, which I hope you will fix with an update in the near future, is GPS. With the stock ROM, and the most recent update on 04/16/2014, the GPS has been blisteringly fast at finding and fixing to satellites. With your ROM I'm not able to access any EPO settings, accept for those in the engineering tool kit, but this also seems to be lacking the normal options.  Even though it sees the satellites it just not getting a Fix, and have tried various tricks to make it do so without any luck.

   Thanks for the hard work..

   Please give us an update

   Log in to reply.
   • 

     05/06/2013
     

      

     KEgg on 04/21/2014 @ 12:37 am

     UPDATE ::

     After quite a lot of experimenting I finally got the GPS to get a fix from the listed satellites. Not quite sure as to why it now works, but have found a work around, for me anyway, when it comes to GPS accuracy.

     After doing various resets via Engineer mode, refreshing A-GPS, and using fasterfix to set my location properly, then sitting outside for while, the phone finally got a fix on the satellites in view. The accuracy though was pretty poor via 'GPS Test' app and 'GPS Status & Toolbox' with it being 20-50 foot out most of the time. I then noticed that the YGPS app within the MTK Engineer mode was fixing to more satellites, and was receiving better signal strength. Went to 'Location Based Services' in EngineerMode, and manually forced the GPS to be on permanently. Switched back to 'GPS Test' which was now receiving data from the same sats, and accuracy was within feet (4-8 foot) of my location.  OK a little long winded to manually force the GPS to be permanently on bet really worth it.

     wonder why it's accuracy drops if not using engineer tool?
2. 

   05/16/2013
   

    

   chetanroenia on 04/21/2014 @ 10:53 am

   Thanks for this ROM! The stock ROM my phone had was with white background and black fonts which caused lots of strain on my eyes, especially at night. More free RAM with your ROM. Camera shows 6MP max resolution. Request you to look into putting the option of 'Don't keep activities' in 'Developer options'.

   Log in to reply.
3. 

   04/25/2014
   

    

   Scoutflippo on 04/27/2014 @ 11:07 am

   Great rom. Much more smooth than stock. Still struggling with the gps fix. Other issue is that reception of the signal is worse on the first sim slot. I have 2 Sims with the same provider and in the first shot I have 2 bars and the second slot has 4 bars. With stock room they were both 4 bars. I hope this can be solved

   Log in to reply.
4. 

   02/10/2014
   

    

   headeye on 05/16/2014 @ 9:02 am

   Flashed yesterday, still evaluating, but immediate feeling that is better than the stock rom.

   Good work Gacama!!!

   Till now all work smooth, only more warming of the top back of the phone and poor signal on sim 1, with the same operator on the two sims.

   Is it a baseband version problem or simply an indication issue?

   Log in to reply.
   • 

     12/07/2013
     

      

     gacama on 05/16/2014 @ 7:16 pm

     I think it is only indication issue, I didn´t have any signal problem with this rom, it has stock modem and baseband
5. 

   02/10/2014
   

    

   headeye on 05/19/2014 @ 6:26 pm

   After few days of use, I must say this is a good rom and it gave new life to my sleepy zp980+.

   The only "big" problem is the compass: like on stock rom it doesn't work.

   Actually, the issue is the magnetic sensor, not correctly configured.

   Please Gacama, is there a way to fix the magnetic sensor behaviour in order to have navigation app work?

   Log in to reply.
6. 

   05/02/2014
   

    

   rsukhiashvili on 05/20/2014 @ 3:42 pm

   How to remove the 'Zopo dual SIM' boot image and replace it with some other image? Also can you not add the 'Dont keep activities' in 'Developer options'?

   Log in to reply.
7. 

   11/25/2013
   

    

   fabriziolecce on 05/29/2014 @ 9:42 am

   Hello Gacama,

   can i install Pure Performance X with this rom?

   And wich one? Stock or CM version?

    

   Thanks

   Log in to reply.
8. 

   06/17/2014
   

    

   Lexa_d on 06/21/2014 @ 10:27 pm

   Why the indicator 3g shows one division less than on other insertions. It seems, quality of a signal from it doesn't worsen.
   Whether and it is possible to correct gallery that the image could be established horizontally as in an original insertion.

   Log in to reply.
9. 

   06/28/2014
   

    

   Moutinho on 07/03/2014 @ 8:13 pm

   Hello gacana, I’ve tried flash yours both rom’s and always appear the message “aborted” I’ve followed every steps…please help. Thanks

   Log in to reply.
10. 

    07/06/2014
    

     

    empty789 on 07/06/2014 @ 5:09 pm

    Hi, im really confused with all these versions of the zp980+ (c2?!), how do i know i can flash this rom without any problems? is this for 1gb ram? or the 2gb version? I read somewhere that you cant flash a 1gb ram version of a rom when you have the 2gb version :X I really need help with this, got my Zopo zp980+ yesterday and don't want to brick it

    Thx for any help!

    Log in to reply.