- Title: ZOPO ZP900H KitKat
- Listed: October, 2014
- Last modified: 10/22/2014 11:50 pm
- Version: AOSP KitKat 4.4.2
You must be logged for ROM download.
35461 total views, 1 today
8 Total favorites
Member Info
DESCRIPTION
Installation order
If you use my layout
Run SPFT and click UPDATE
If you use my layout
1. Option. Run SPFT. Click Firmware upgrate
2. Option. If not helped the first option.
1. Be sure before flashing make a backup of the NVRAM.
2. If you own markup, then take stock firmware for flashtool. Download scatter and formatted first PMT, then everything from boot up FAT on instructions from SevenMaxs from attachments. Address for manual formatting:
PMT
Begin Address 0×0000000000700000
Format Length 0×0000000000400000
File system
Begin Address 0×0000000002780000
Format Length 0×0000000092800000
If you have a non-standard markup and obtained with different patches or programs, perscitia address independently the same statement from SevenMaxs. Address PMT is always the same for all 6589.
After each format you want to disable the phone from the computer and distort the battery.
4. Flash a new firmware on the Download button. Check with preloader is better to remove. In order to avoid, so to speak. This area we still intact.
5. After flashing reseat the battery, connect the USB cable to the computer and enter the recovery stage.
6. Do Factory Reset and restart smart.
※Please make a backup of your device before installing or updating ROM
Anyone tried??
IS it real 4.4.2??
Recovery in zip is 9mb- do we need to change anything to make it work??
Yes its working.
Thanks for the ROM.
I used preloader of JB and used firmware upgreade option.
Can u tell me how u incresed size of boot and recovery to 11mb.
The ROM has issue with storage.
sd card and internal are swiped – any solution for it??
Thanks in advance.
plz can u put up detailed steps about how to install this rom.. screenshot will help.. i'am installing it for the first time
thanks i installed
Edited boot.img
changed fstab
now storage is ok
how did u edit? can u please upload edited boot.img?
Thanks for this rom…@cheshkin
good work, Cheshkin!! but, can you port this ROM for ZOPO ZP810, please…. ??? thank you very very much!!
did anyone get nvram warning er=0×10 in the wifi ?
For me, I need to copy a preloader.bin from an other Zopo910 package, then load the scatter filek, then follow the instructions.
Finaly it works fine.
Works Fine! I´ve using it for an hour and It looks great. Wifi, camera…
Used:
- SP Flash Tool V3.13.04
- "preloader_vanzo89_wet_jb2.bin" from "https://www.needrom.com/wp-con.....3.zip"
Thank you! Amazing job!
its awsome ! ty for great job !
we r waitin for android L for us devices from u ! )