Ulefone
  • Title: Chuwi Vi8
  • Listed: 01/25/2015 11:28 pm
  • ROM Version: ROM Windows 8.1
  • You must be logged for ROM download.



Overall Rating : 21

32990 total views, 2 today

12 Total favorites


  

Chuwi Vi8

Author adMember Info

SoCr@Te

  • Listed by: SoCr@Te
  • Member Since: 05/15/0470

DESCRIPTION


ROM Tablet Chuwi Vi8 – ROM Windows 8.1

ROM 2 – ONLY serial numbers beginning : 150 100 000

ROM 2 – Official Chuwi Vi8 version: 1412086-V01

—————————————————————————————————————————————————–

ROM 1 – ONLY serial numbers beginning : 141 209 001

ROM 1 – Official Chuwi Vi8 version: 1412086-V01

Language support: Multilang

 

Install ROM :

Install with H2OFFT-W.exe

 


Share Button

※Please make a backup of your device before installing or updating ROM


39 Responses to“Chuwi Vi8”







  1. 01/21/2015
    Posts: 2

    I cant mount the big .wim File.

    Can you please backup the Drivers for me? with something like this: http://www.needrom.com/download/chuwi-vi8/

    would be very nice..

     





  2. 01/21/2015
    Posts: 2

    Ok I did everything, what you mentioned, but now while the BIOS/UEFI flashing was done it tried to reboot and dont come up again.. I get a blackscreen everytime I try to reboot that device. What can I do to flash the UEFI correctly when it gets a blackscreen?

    please help asap





    • 08/15/2015
      Posts: 1

      It did the same thing to me, blackscreen.  I think is was not the good BIOS according to the tablet version.  The BIOS was not the same version.  I applyed the 141 version to my 150 version but it's my mistake.  Now it seems it don't wants to boot anymore even on USB.  I can't go to the BIOS setteings with ESC at startup.  VOVO55 told: The BIOS will first need to pull out and then flash the specialists with the help of a special device.  Someone has a solution?





  3. 10/12/2014
    Posts: 8

    Interesting to get where to get dual-boot and Android OS for Samsung Vi8





  4. 02/18/2015
    Posts: 1

    same issue here, i have reploaced the touch sensor (fron glass to be clear) and after that it doesn t boot anymore, any help would be appriciated





  5. 10/12/2014
    Posts: 8

    Arlo081 — If I understand correctly, you first need to reflash you need the BIOS, which is contained in the ROM 2 or the ROM 1.
    The BIOS will first need to pull out and then flash the specialists with the help of a special device.

    SoCr@Te — Where do you get firmware for Chuwi VI8 ? I would like to get BIOS and Android for Chuwi VI8





  6. 02/23/2015
    Posts: 2

    Quick question for you guys.

    Is there a way to format a dual os Chuwi and install only android or windows 8?

    I cant find anything on google.. too soon?

  7. darkroom




    01/05/2014
    Posts: 8

    Salut, j'ai trouvé les pilotes pour la plupart des Chuwi sous windows 8.1 ici.
    https://yadi.sk/d/SleAozlXdtSAJ
    J'ai telecharger "Nori_Win8.1_Driver_S801_S805_S895_S105_v150110.1_Stable.zip" et les pilotes du VI8 sont present dans l'archive.
    Testé avec un win 8.1 pro tous les pilote fonctionnent tres bien sur ma chuwi Vi8.
    Bonne continuation

    Hi, I found drivers for most Chuwi under Windows 8.1 here.
    https://yadi.sk/d/SleAozlXdtSAJ
    I download "Nori_Win8.1_Driver_S801_S805_S895_S105_v150110.1_Stable.zip" and Vi8 drivers are present in the archive.
    Tested with a win8.1 pro all driver work very well on my Chuwi iv8.
    good luck





  8. 02/23/2015
    Posts: 2

    I need help guys.

    I really hope someone can help me whit this :(

    I have a chuwi vi8 dual boot. (rooted)

    I edited my build.prop to change the dpi and problably i have touched the permission. Now the chuwi is stuch at the boot screen. I can enter the recovery mode and i can try to use ADB.

     

    But i wasnt able to pull the build.prop as i get an error (error.closed) 

     

    Im stuck, i dont know how to boot manually windows or how to fix the android problem.

     

    Can someone please let me have a copy of your build.prop? Or better any way to flash the android ROM? I cant find anything!

     

    Worst case scenraio ill be fine whit deleting everything and flashing only windows, but i dont know if is possible from where im stuck.

     

    Again:

     

    build.prop problem

     

    I can enter recovery and ADB (but adb pull/push doesnt work apparently)

     

    You guys are my last hope!





  9. 02/28/2015
    Posts: 2

    Hello
    Buy Vi8 recently Dual chuwi.
    As I like to try things unintentionally format the partition with Android and Windows only left me. While trying to retrieve shred the windows boot too (blue screen of recovery)
    In the end, I got an iso of Windows 8.1 which put a bootable Pendrive and install Windows 8.1 Professional.

    On the subject of drivers not working accelerometer, cameras, sensors, sound, wifi, bluethooth, ect …

    This was solved by putting drivers Darkroom friend (thank you very much) but still ahy something important to me does not work, the touch screen.

    I tried to install the drivers that are provided in the Nori_Win8.1_Driver_TP10_VI8_150110 folder but will not let me install, skip the following message:

    KMDF HID Minidriver for touch I2C Device

    The third-party INF does not contain digital signature information.

    However, I could inslalar drivers of Nori_Win8.1_Driver_TP5_VX8-3G_150110 if you install folder, but the touchscreen does not respond well.

    Please could supply a driver that works or give me any advice? Thank You





  10. 02/28/2015
    Posts: 2

    Hi

    I recently buy the Vi8 Dual chuwi.

    As I like to try things, unintentionally I format the partition with Android and I only could use Windows. While I was trying to retrieve, I broke the windows boot too (blue screen of recovery).

    In the end, I got an Windows 8.1 ISO, which I put on a bootable USB and install Windows 8.1 Professional.

     

    However, due to the driver, the accelerometer, cameras, sensors, sound, wifi, bluethooth did not work, ect …

    This problem was solved by intalling Darkroom drivers' (thank you very much), but still there are a important problem, the touchscreen does not work.

    I tried to install the drivers that are provided in the Nori_Win8.1_Driver_TP10_VI8_150110 folder, but do not let me install, and the install skip to the following message:

    "KMDF HID Minidriver for touch I2C Device

    The third-party INF does not contain digital signature information."

    However, I could install drivers of Nori_Win8.1_Driver_TP5_VX8-3G_150110 folder, but the touchscreen does not respond well.

    Please could supply a driver that works or give me any advice? Thank You (sorry for my English)





    • 07/16/2015
      Posts: 1

      Chuwi Vi8 Windows 8.1 Reinstall Touchscreen Calibration Problem: Resolved

      Hello fellow owners of the Chuwi Vi8 tablet.

      When reinstalling Windows 8.1 there is an annoying driver error which can occur which causes the calibration on the touchscreen to no longer function correctly. It will register taps but not in the correct spot on the screen.

      This error can be resolved by installing the correct drivers in the correct order.

      The Intel(R) HD Graphics display driver needs to have been installed on the tablet before the KMDF HID Minidriver for Touch I2C Device which runs the touchscreen.

      If you are having the error where the touchscreen is not calibrated properly:
       go into Device Manager and uninstall The Intel(R) HD Graphics display driver, check the box to delete the driver from the system
       continue in Device Manager and uninstall the KMDF HID Minidriver for Touch I2C Device driver, check the box to delete the driver from the system
       Install the Intel(R) HD Graphics Display driver from the pack available at: http://techtablets.com/chuwi-vi8/downloads/ (Chuwi Vi8 Win8.1 Drivers April 2015 79.1 megabytes) and reboot the tablet
       Install the KMDF HID Minidriver for Touch I2C Device_11.59.20.989_x86_non driver available at: https://yadi.sk/d/SleAozlXdtSAJ in Nori_Win8.1_Driver_S801_S805_S895_S105_v150110.1_Stable.zip (subdirectory Nori_Win8.1_Driver_TP10_VI8_150110_Stable / 1_Other / KMDF HID Minidriver for Touch I2C Device_11.59.20.989_x86_non) and reboot the tablet

      Touchscreen ought to be calibrated properly after these changes

      Enjoy!

       


Leave a Reply

You must be logged in to post a comment.

banner