- Title: AICP 6.0.1
- Listed: May, 2016
- Last modified: 05/20/2016 4:14 pm
- Version: 6.0.1
You must be logged for ROM download.
19617 total views, N/A today
7 Total favorites
Member Info
DESCRIPTION
Try my new take on marshmallow for w200s! I proudly present AICP 6.0.1 for the w200s with compatible screens! Every single bug(front camera, gps, fm radio, all sensors, stable network, no overheating) FIXED! Installation instructions:
1. Install this rom with spflashtools: https://www.needrom.com/download/w200s_kk_by-t3/ . If this rom does not work on your device, then my rom wont work either. The kernel is based on that rom, to have everything working(including front camera!)
2. Flash CWM (you can use spflashtools, just change the path for the recovery).
3. Copy Reformat.zip to an external sd card, boot in cwm and flash it. This will repartition your storage to be a big 27 gb data partition. CWM will reboot, and run the created format.zip from sdcard, and then format both data and sdcard partitions from CWM.
4. Reboot into system and verify the partition layout is correct. If it is not, repeat the last step.
5. Flash TWRP3 ( you can use flashtools for this as well).
6. Copy aicp.zip to an external sdcard, reboot in twrp, wipe everything(system,cache,data), format data, then go to mounts and untick everything except the micro sdcard.
7. Flash aicp.zip.
8. Reboot and enjoy.
If you are at resurrection remix, just boot in recovery, wipe system,data,cache ,flash aicp.zip and reboot.
Gapps,Viper4android,Cameranext,Gallerynext already included in the rom. Have fun guys!
Original rom is here: http://forum.xda-developers.com/a310/development/rom-aicp-11-android-ice-cold-project-t3378788
※Please make a backup of your device before installing or updating ROM
i screen 1_nt35590_linglong_t499_47m_AUO_dsi_4_vdo_ i can install this rom?
Established AICP 6.0.1 Listed: 05/20/2016 4:14 pm
https://www.needrom.com/downlo.....ad/aicp-6-0-1/
Tell me that is not so done can the firmware is not suitable for my W200S
Was Build number: ThL.W200S.156D.A1.JB9.HD.EN.8P256.OV8825.MT6592GW.20140221
LCD Driver IC: 1-nt35521_linglong_T499_84M_JDI_dsi_4_vdo_hd
Included is the sensor operates as soon as the screen goes blank (for inaction or force) sensor stops working.
Batteries and pulls out all over again.
whether it is possible to make the firmware
1-nt35521_linglong_T499_84M_JDI_dsi_4_vdo_hd
to get everything working.
????
First of all thanks a lot for all the work you ve put into this!!
Second, when i install the reformat.zip via CWM it wont create format.zip.
I ve tried to install the format.zip that was in the reformat.zip but when I reboot it will just freeze at the thl logo.
Anyone got any advice for this?
I aslo dont have an internal sd card partition just the one ~22gb partition and external sd, dont know if thats supposed to be.
also it seems like i got it working somehow although whenever i lock the screen and wake it up again with the hardware button the touchscreen wont respond anymore till reboot. do i have the wrong lcd driver then? i didnt look it up
Hey I have any question. I flashed the rom with CWM without TWRP and it works. I have the Problem, that the phone shows me only a storage of 6gb. I had also some Problems witht step 3. After installinge reformat.zip and reboot to cwm, I couldn´t find any format.zip to run it.
So can you help me pls?
Ok it works without format.zip
Android 6 is running right now with 27GB storage + ext SD Card
But I have an overheating Problem. After 5-10min my phone is very hot and restart.
Hi. I noticed that on my LCD the only problem is that the touch does not works after i lock the screen. On kitkat this could be solved disabling "Smart Wake". The problem is the same, but in the newest systems this option is not available anymore. Is it possibe to disable it without the menu? I mean, maybe there's some register or file that allows to edit this setting directly. That would solve the problem.
Thank you.
Please correct the broken display after waking. very much ask. LCD Driver IC : 1-nt35521_linglong_T499_84M_JDI_dsi_4_vdo_hd
I'm trying this rom, is very smooth, sensor ok, speaker ok, GPS ok….
I've problem with WIND, don't work in 3g and signal is not stable.
Anyone have same problem and/or can tell me how can I fix?
thanks in advance
Thank you. everything is working
if your display driver starts with 1 or does not work after an unsuccessful touchscreen firmware, this firmware sew – https://yadi.sk/d/IouoRqHlqXfE.....N. select – MT6592_Android_scatter-wipe.
Hello gavr.gavric2013 , I have the same problem with the touchscreen after screen wakeup, and I would like you to explain if the method indicated in your last post solves this problem. Do i have to recook the rom and put – MT6592_Android_scatter-wipe.txt file on it??.How could I that? Thanks