- Title: Android 6.0 [OFI]
- Listed: May, 2016
- Last modified: 06/17/2016 3:05 pm
- Version: 20160514
You must be logged for ROM download.
25156 total views, 2 today
14 Total favorites
![Android 6.0 [OFI]](https://cdn.needrom.com/wp-content/uploads/2016/05/22756-500x281.jpg "Android 6.0 [OFI]")
Member Info
DESCRIPTION
Dear users of Ulefone Power
We have finally completed the adaption of Android 6.0 for your mammoth battery device and now you can install the ROM following the guidance on our official site. After flashing, you can experience the fantastic marshmallow and if there is any updates you will receive it OTA. Though we have made our best to perfect the software, we know there will still be some mininor drawbacks, so welcome to give your feedback through our customer service (service@ulefone.com) and that’ll be very helpful for further optimization.
Due to the issue of 32-bit to 64-bit conversion, it will take time for our engineers to upgrade your android 5.1 Ulefone Power to Android 6 wirelessly. For that, we express our sincerest apology, but we promise this problem will finally be solved. We appreciate more patience from you guys.
DONATE BITCOIN ADDRESS: 1JB8STHML3HVk3BcUrYzxyY7cS85PuPRC1
※Please make a backup of your device before installing or updating ROM
- camera button can be programmed by using xposed module "xposed additions" (requires twrp –> root –> xposed installer, manuals on xda)
- led configuration is hidden in display settings, not many settings but at least this
- IR is working, need other app, like anymote, but some permissions to be allowed (dont remember exactly how i did it, but it works)
- be careful with gestures and usb debugging turning on, can affect charging
Hello, I deactibated usb debugging and also gestures, however in a night charge (6H) the phone only reaches 70% starting from 20%!!.
With 5.1 It used to charge in two hours!!!.
Any other hints to what may do? Build.pop or something?? .zip
Thanks,
Flash complete android 6.0 from 27/04
Flash only system from android 6.0 14/05
Start smartphone and shut it down
Flash twrp mm 64
Now IR does not work.
If I install only android 6.0 14/05 IR is working
Fingerprint not working
hello I am in Europe, I flashed from Ulefones software page img file.
to my surprise now I get an "invalid imei" also gprs signal is bad compared to Android 5.
basically i cannot place calls!! I get a "error no carrier"
since no one mentioned fromnthis forum this issue I will download the rom from need rom.
ant one experience these issues?
Yes you lost your IMEI, they posted a video about this issue.
https://www.needrom.com/downlo.....re-video-guide/
TRY THIS FIRST
1) open dialer and type *#*#3646633#*#* this code will take you to engineering mode
2) now select "GPRS" and write IMEI —- THANKS TO xyko87
Hi, I have a problem, I´m not able to flash the rom following the official guide. I have downloaded all files and installed drivers by clicking on install.bat.
Then I runned CheckSum_Gen from rom directory. Then I opened SPMultiportFlash…and loaded Da file….I have not find Certification file as on picture. Then choosed scatter file from rom folder. But I cannot see any com ports as on picture…and when I clicked on Start all I get message that com ports are repetitive or invalid and that Brom and preloader have the same com port number.
Do you have any idea what is wrong? This oficial manual seem to me little but stupid
I flashed a lot of phones with any problems, but on this one I´m lost.
Thanks
Solved myself….Ulefone add video user guide to software update page. Following this video solved my problem
WiFi only connect at 65mbps
What is your ruter speed?need 5GHz to beter performance!!!!!
This Update_20160616 is nothing new as it's the 0517 ROM listed previously
Yep same OneDrive location. I haven't downloaded yet to check if latest version.
I have a general question about the flash tool: I can't do the OTA update (even though I flashed the original stock recovery back again). What do I have to flash in the sp flash tool, if I just want to update my phone to the lastest version?
I always get an error message when I tried to OTA update my phone. The information would be very nice to hear, even for a future version of this rom (It seems to be very buggy).
Thank you very much and have a nice day!
If you can locate the zip update file then you can manually update using modded recovery. The problem is getting the update zip and finding where it installs. Usually you can log the directory where it installs to.
I have a similar problem where I'm trying to fix other people's phones and the error about corruption and wifi updates disabled. Is that the same error?
"Your system was damaged, wireless update is disabled"
If you use link2SD or other tool you can scrub the application data and cache for the wireless update removing any errors and modes.
The ota update is held in a md5 based zip "/data/user/0/com.adups.fota/files/adupsfota/update.zip". That means you need to unzip it and find another update.zip inside to use with a modded recovery.