- Title: Android 6.0 v3.1 DOOGEE X5PRO
- Listed: May, 2016
- Last modified: 06/01/2016 6:20 pm
- Version: 6.0 x64 x32 FIX
You must be logged for ROM download.
45248 total views, 2 today
42 Total favorites
Member Info
DESCRIPTION
Native compiled DOOGEE X5PRO Android 6.0 Marshmallow for FlashTool.
Multilanguage, x32 and x64 version ROM.
SuperSU TWRP for all versions
DE-ODEX ROM – first run (or after wipe) about 10 minutes.
FIX FOR DEEP SLEEP PHONE (power safe) AFTER CHARGE:
1. Settings / Backup & restore / Backup —> OFF
2. Reboot phone
All work fine!
This ROM working on 3.18 custom compiled kernel made by me.
Please donate me for more good work!
Total time for make this kernel and ROM about 4x month hard work.
Look my site for actual information!
Please go to page and click on advertisements.
http://getbest.ru/x5pro_marshmallow_v3-1.htm
PS:
x32 TWRP work only with x32 ROM, x64 TWRP work only with x64 ROM
With x64 version ROM come x64 TWRP – use this version for run TWRP.
x32 version ROM fully compatible with x32 TWRP for DOOGEE X5PRO, my recomedation for first flash use x32 ROM!
※Please make a backup of your device before installing or updating ROM
Camera not work on some devices revision 2 or 3.
I have not this version of phone and can not test for cameras.
Thanks for your work on this ROM !
I installed the x32 version, everything works well except the mobile data and encryption. It'a annoying because without data mobile, impossible to use the 4G :/
Even by returning on the firmware official R17, the mobile data do not work…
Where this problem come from ?
My problem is due to the absence of IMEI ! I haven't save of the nvram.bin, after a night pass above I do not find of nvram.bin for the X5 pro, did he anybody can me uploader his ?
Two IMEIs is on X5pro box.
Run MTK Engineering mode. (Stock ROM: *#*#8612#*#*)
Click on Engineer Mode (MTK) » Swipe left to Connectivity » click on CDS Information » Radio Information.
Click on phone 1 if you want to change your sim 1 or choose Phone 2 to change sim 2 IMEI, follow this guide:
For Phone 1: “AT+ EGMR=1,7,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)
For Phone 2: “AT+ EGMR=1,10,”YOUR NEW IMEI NO” (make sure you add a space in between AT+ & EGMR)
Press the “Send At Command” (You should receive a message that your ‘AT command sent)
Reboot and dial *#06# to confirm your new IMEI.
(If not work, repeat.)
Thank you very much it works !
To restart on a good base, this is what I made:
1) Return to the ROM Stock R17 (Format All + Download in SP Flash Tool)
2) Restore IMEI with the method of szanalmas
3) Passage to the ROM 6.0 X32 with the kernel 3.18.39 of snowcatPDA via SP Flash Tool (scatter WIPE_CLEAN_DATA in Download Only)
4) Implementation of TWRP 3.0.2 with SP Flash Rool
5) Installation of SuperSU 2.76 in recorvery mode
Everything works perfectly now !
Cool!
Willingly.
Yes, had the same IMEI problem. Flashing an old nvram worked as well. (even 32 bit stock to 64 bit MM) I would advise to make a backup of nvram with TWRP from stock ROM that you can flash in case.
Apart from that everything works great. Good speed, battery life is okay, xposed, root. Thanks a lot!! Best ROM I've seen so far
Kernel 3.18.39 not good! Best id 3.18.36!
Now I have not time for working on kernels – hard worked on android comerce app.
About caeras on 3th hw version of phone – DOOOOOOOGEE hide new i2c address of camera for new revision.
I can't run it – haven't phone for deep learing – remote debugging veru hard for me.
I'm wait for android 6.0 from DOOGEE for cath DTS file woth hardware specification camera…
I have kernel 3.18.19 how can I change it without loose my data to 3.18.36? You told to flash only boot.img and system.img
Kernel not need flash system.img. Flash only boot.img – all changes will keep.
kernel in 3.1 x64 is 3.18.19.
How can I get the kernel 3.18.36??
Hi and thank you,
your ROM (mine now
) is great. I am waiting for a patch which make working rear camera because I have the problem.
Good job it works for me
well. I have tryed beta-boot-6.0-3.18.41-x64 and works great.
If I find any errors I will tell you. thanks.
Sir, can you give me source for this rom.?
Отличная работа.Все работает стабильно, без глюков.