DESCRIPTION

ROM Mobile HUAWEI Ascend P6 –ROM Android 4.2.2

Update ROM 1 Official ROM HUAWEI P6 Telecom Edition version:  P6-C00_EmotionUI_1.6_V100R001C92B121

————————————————————————————————————————————————————–

Update ROM 1 Official ROM HUAWEI P6 Telecom Edition version:  P6-C00_EmotionUI_1.6_V100R001C92B120

Update ROM 2 Official ROM HUAWEI P6 Mobile version:  P6-T00_EmotionUI_1.6_V100R001C01B120

Update ROM 3 Official ROM HUAWEI P6 Unicom version:  P6-U06_EmotionUI_V100R001C17B120

Gapps service include –No Rooted –Multilang

————————————————————————————————————————————————————–

ROM 3 Update 12/04/2013 HUAWEI P6 Unicom ONLY version Ascend_Android_4.2, Emotion_U06V100R001C17B118

Gapps service include –No Rooted –Multilang

————————————————————————————————————————————————————–

Update 10/02/2013 HUAWEI P6 Mobile ONLY version Ascend_P6-T00,Android_4.2, Emotion_UI,V100R001C01B117-05011MWT

Gapps include –No Rooted –Multilang

————————————————————————————————————————————————————–

Update 08/21/2013

Changelog:

————————————————————————————————————————————————————–

ROM 1 Official ROM HUAWEI P6 Telecom Edition version:  P6-C00_EmotionUI_1.6_V100R001C92B112SP01

ROM 2 Official ROM HUAWEI P6 Mobile version:  P6-T00_EmotionUI_1.6_V100R001C01B108

ROM 3 Official ROM HUAWEI P6 Unicom version:  P6-U06_EmotionUI_1.6_V100R001C17B112SP01

Language support: Multi Lang

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates ->SD card upgrade ->confirm ->upgrade, backup data, select the backup data;upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

Root:

1. First, to ensure that the driver has been installed on your computer.
2. Enable USB debugging
3. Phone connected to the computer, run Eroot, after a few minutes you can connect successfully(Usually not more than 10 seconds).
4. Click a button Root, the software will automatically find the right solution and perform root. In this process, no need to do anything on computer or mobile phone.
5.Root successful, you will find ”Superuser”application in your phone, then you can pass the application to the phone on the application for authorization.