- Title: BLUBOO S1
- Listed: September, 2017
- Last modified: 09/28/2017 2:03 pm
- Version: ROM Android 7.0
You must be logged for ROM download.
28423 total views, 4 today
21 Total favorites
Member Info
DESCRIPTION
ROM Mobile BLUBOO S1 – ROM Android 7.0
ONLY MT6757
Official ROM BLUBOO Version: BLUBOO_S1_Helio_P25_L_V01_20170920 - full_hct6757_66_n-eng 7.0 NRD90M
————————————————————————————————————————————————————————
Update Official ROM BLUBOO Version: BLUBOO_S1_Helio_P25_L_V01_20170920 - full_hct6757_66_n-eng 7.0 NRD90M Update 2017/09/28
Gapps include – No Rooted
Language support : Multilang
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6757_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
※Please make a backup of your device before installing or updating ROM
Please help me.
When i use MTK_AllInOne_da.bin I get Error: STATUS_BROM_CMD_SEND_DA_FAIL
When I use DA_PL.bin I get an error box saying:
Chip mismatch!
Scatter:MT6757D
device: MT6757
Thx for the rom, it allows use fingerprint zone like back or home button and disable nav bar, for all that want to root just put cwm from this link https://www.androidfilehost.co.....038;s=bluboo+s1 install adb.exe and flash it via fastboot putting recovery.img in adb folder, then reboot device and reboot recovery and install for a complete root last version of magisk v14.0 or Supersu v2.82 via adb sideload (how: put zip in same folder adb and rename zip for short magisk or supersu, open cmd like an admin and type by ie adb sideload magisk.zip). For user can`t flash with SPFlashTool must be hold at same time both volume+and- while connecting pc till begin process and then release buttons.
"For user can`t flash with SPFlashTool must be hold at same time both volume+and- while connecting pc till begin process and then release buttons."
it is possible that this error somtimes repeated, then try again ….
- cwm installed successfully via sp flash tool
- magisk v14.0 installed successfully via cwm install zip
- Supersu v2.82 installation failed via cwm install zip
- adb sideload failed with adb sideload with error: device '(null)' not found
Any hent / help please.
The Kaspersy Internet Security sweet shows a security risk: HEUR: Trojan.AndroidOS.Agent.qy at the Free Touch App (/system/priv-app/freetouch_ltx_relese_cts
greetings to everyone have you tried the last needrom firmware ??
да, прошилась нормально, даже стоковый рекавери появился (до этого не было никакого)
And i get When i use MTK_AllInOne_da.bin I get Error: STATUS_BROM_CMD_SEND_DA_FAIL
I tried installing the two updates on an S1 with activated sensors and proximity sensor running, installing the two updates the sensors will no longer work and they will not be detected.
@Choda you will get Error: STATUS_BROM_CMD_SEND_DA_FAIL if you just plug phone in.
You need to have phone shut down, then hold volume up and volume down in together and plug in phone then the SP Flash will work
I try all
Reinstall driver, reinstall win, hold vol + and -, hold only +, noting hold,use difrent cabel,use difrent PC, use all download agent, 3 time download firmware, use difrent flash tool and i get brom error.
Hi! You can use No ROOT firewall, Malwarbytes, Dr. Web or Adguard to block or stem OFFICIAL malwares lmuch.com, android.click.173.origin cointained on FreeTouch, Phenix and ScrWeather. But I agreed with you, we must ask support to LineageOS or others to have a clean S1 ROM, because it could be is a good device (LCD & speed) . So keep us in touch here and on XDA Forum
Follow my post here, last page of this thread. got ingenius. I got a clean-smooth-bug-and-ads-free Solution…
1º Mix an v1_Full_Scatter replace v4_system.img File over the old v1_system.img
2º FORMAT+DOWNLOAD on Flashtools.
3º After flash, boot-on, dev-settings->unlock oem
unlock V1_bootloader with command: "fastboot oem unlock" (permanent/orange state)
4º Re-flash patched_boot.img in fastboot (from v10_rom, on xda post).
"fastboot flash boot patched_boot.img"
5º Reboot, w8 for black screen error "first boot error".
its off, power on again and… wait for "erasing" state, into stock recovery.(IMPORTANT)
6º After the erasing Circle, get normal boot, Invalid IMEIs.
Write on dialer #*#*3646633#*#* -> GPRS -> Write your old's IMEI1 and IMEI2 -> WRITE.
Reboot, Reset Data conexions(ON/OFF It), Put your APN. and Reboot.
__________________________________________________________
with:
all parts from v1
system.img from v4
boot.img from v10
Choda
http://kustruki.com/errores-so.....-sp-flash-tool/
i fix problem tanx
hello
please how did you fix pb
thks