- Title: Cherry Flare S3 Power
- Listed: November, 2015
- Last modified: 12/19/2015 12:47 am
- Version: ROM Android 5.1
You must be logged for ROM download.
35566 total views, 4 today
20 Total favorites
DESCRIPTION
ROM Phone Cherry Mobile Flare S3 Power - ROM Android 5.1
ONLY MT6592
Update Official ROM Cherry Mobile Flare S3 Power version: Cherry Flare S3 Power Lollipop Update 11282015 – full_techain6592_wet_l-user 5.1 LMY47I
——————————————————————————————————————————————————————————————
Official ROM Cherry Mobile Flare S3 Power version: Cherry Flare S3 Power Lollipop SW04 08252015 – full_techain6592_wet_l-user 5.1 LMY47I
Gapps include – No Rooted
Language support: Multilang
Install ROM:
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6592_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
※Please make a backup of your device before installing or updating ROM


Member Info
thanks sa rom…..kukunin ko ang nvram nito para irestore sa flare s3 ko na invalid imei…..More power!!!
Thanks sa rom na to…naayos CM Flare s3 power V2 ko…
gud pm.. nag ka ok po ba talaga xa sa cherry mobile flare s3 power V2 na unit mo? bka kc ma dead boot aq pag ma wrong firmware ang ma i flash q.. just wanna make sure that this is for V2… anyway thanks a lot.. i'll try this..
saan ginamit mong rom? ung update o ung old sa taas ? na dead mo po kc CMFS3P ko eh .
ill will try dis ..
my fs3 power deaddead boot since flashing wrong rom
thanks for sharing
hope wish me luck
salamat po sa rom…
POWER V2 po ba yan
nadead boot po yung cp ko fs3p po sya, hindi na po sya mabuhay and at pag chinacharge ko po sya d na sya nag chacharge pero pag sinasalpak ko po sya sa pc nadedetect pa naman po sya, sa tingin nyo po gagana po kaya yung binigay nyong tutorial sa taas sa sitwasyon ng phone ko ngayon???
answer po plss….Thank You ^_^
Maraming Salamat Sa ROM na to at sa nag upload
From Deadboot (No Power) (Not Charging) dead talaga .. Ngaun ok na Gamit ang ROM Nato
Nahirapan ako sa SPMDT , kaya SP Flash Tool nalang Ginamit ko
Maraming Salamat Talaga
hi ask ko lng anung version ng SP flash tool gamit mo ? thanks more power
pang version 1 po ba to or version 2?
thanks sa rom
What Version to??