- Title: Cuasar version 2
- Listed: July, 2015
- Last modified: 08/01/2015 2:08 pm
- Version: VIBEUI V2.0 1437 7.3.1
You must be logged for ROM download.
21752 total views, 3 today
4 Total favorites
Member Info
DESCRIPTION
Roms 2.0 and 2.1
UPDATE 1
Make a backup of the system ROM if it were not supported by your terminal. It can be done with MtkDroidTools
Make a backup of the IMEI with MtkDroidTools before making Flash
Adding this Mtkdroidtools for you can reinstall the IMEI and you can backup the IMEI.
Installation roms 2.0 and 2.1:
!!!I recommend backing up the nvram with Mtkdroidtools before using Spflashtool to keep the imei, otherwise there would then insert the end of the process once the terminal with the new rom rebooted.!!!!
-Donwload and unpacking S660 CUASAR version 2.0.rar
-Off the phone and remove the battery
-Run SP_Flash_Tool and selected MT6582_Android_scatter.txt on rom directory
-Download press release o download/firmware
-Connect phone without battery
-When the green circle appears the battery and turn on the phone.
-When I start properly, shut down again and go into recovery mode (rom 2.0 pressing “Power” then”Volume +” ) (rom 2.1 pressing “power” then “power + and power -”) and select boot recovery.
Select “Wipe data / factory reset” and run
Select “Wipe cache partition” and run
select “Advanced” and then “Wipe Dalvik Cache” and run
Select “Back” and run
Select “reboot system now” Program
- And wait for it to restart, you can restart several times. It takes a while.
And if all goes well will be all set.
If you give the proximity sensor problems only you have to download “S660 CUASAR version 2.1” unzip files and change the ROM before flashing with SPflashtools.
This ROM has been tested on a Chinese version terminal S660 and it worked all components.
※Please make a backup of your device before installing or updating ROM
Hi, is there any possibilities to have chose 2G or 3G on 1st SIM? (Sorry for my english)
So can not find some city in Russia, for example St- Petersburg:(
If you can change 3g to 2g, you only have to enter network settings and network mode.
if you enter the Engineering Mode and select Band mode, you can see the kind of band that is compatible with the phone.
Hola CUASAR e instalado la rom y va bien, el detalle es cuando utilizo el wifi se conecta al modem pero no puedo accesar a internet, es decir esta conectado pero no hay trafico de datos, habria alguna forma de solucionarlo permanentemente, cabe mencionar que se soluciona desactivando y activando el wifi pero es molesto hacer eso a cada rato, espero su respuesta gracias por su atencion, saludos
Hola.
Pues es muy extraño ese fallo, esta version es la que uso para mi terminal y la he reinstalado montones de veces, pero ese fallo nunca me lo ha dado. Probaste a conectarte a otro Modem?
It is very strange that ruling, this is the version I use for my terminal and I reinstalled lots of times, but this sentence has never given me so. Tried to connect to another modem?
La verdad no lo e intentado, pero lo voy a hacer y comento despues, muchas gracias por contestar, por cierto hara otra rom basada en lollipo?
I’m trying to vibe 2.5. coming soon
2.1 proximity sensor not work
google account downloads contact photos in bad quality
2.1 proximity sensor not work
Hello. So I made two versions, if the proximity sensor does not work in version 2.1 should install the 2.0. rom is the same, but with different proximity sensor
Great Rom, but why light sensor blinking all the time? And why delete Lenovo weather?
When releaseing vibe 2.5 ? Hola 
It's up to you! 2.0 ,2.1 different kernel if proximity sensor not working correctly. Update has no lenovo launcher I think… read the content! I installed 2.1 only.
cannot install google play games? why?