- Title: Cuasar version 2
- Listed: July, 2015
- Last modified: 08/01/2015 2:08 pm
- Version: VIBEUI V2.0 1437 7.3.1
You must be logged for ROM download.
21751 total views, 2 today
4 Total favorites
Member Info
DESCRIPTION
Roms 2.0 and 2.1
UPDATE 1
Make a backup of the system ROM if it were not supported by your terminal. It can be done with MtkDroidTools
Make a backup of the IMEI with MtkDroidTools before making Flash
Adding this Mtkdroidtools for you can reinstall the IMEI and you can backup the IMEI.
Installation roms 2.0 and 2.1:
!!!I recommend backing up the nvram with Mtkdroidtools before using Spflashtool to keep the imei, otherwise there would then insert the end of the process once the terminal with the new rom rebooted.!!!!
-Donwload and unpacking S660 CUASAR version 2.0.rar
-Off the phone and remove the battery
-Run SP_Flash_Tool and selected MT6582_Android_scatter.txt on rom directory
-Download press release o download/firmware
-Connect phone without battery
-When the green circle appears the battery and turn on the phone.
-When I start properly, shut down again and go into recovery mode (rom 2.0 pressing “Power” then”Volume +” ) (rom 2.1 pressing “power” then “power + and power -”) and select boot recovery.
Select “Wipe data / factory reset” and run
Select “Wipe cache partition” and run
select “Advanced” and then “Wipe Dalvik Cache” and run
Select “Back” and run
Select “reboot system now” Program
- And wait for it to restart, you can restart several times. It takes a while.
And if all goes well will be all set.
If you give the proximity sensor problems only you have to download “S660 CUASAR version 2.1” unzip files and change the ROM before flashing with SPflashtools.
This ROM has been tested on a Chinese version terminal S660 and it worked all components.
※Please make a backup of your device before installing or updating ROM
After Flash the 2.0 Its Stucks with lenovo logo and i try to go recovery mode through pressing volume + and power button , when i choose recovery , its goes black screen
Cuasar Ayuda!
el SP Flash llega correctamente hasta el final del download. Luego arranco el telefono pero se queda colgado en el logo Lenovo. tarda mucho en arrancar? Si leo bien las instrucciones, deberia arrancar una primera vez y luego debo arrancarlo en recovery para hacer el wipe.
que es lo que he hecho mal?
He leido por ahi que no deberia haber dejado selecionado el Preloader en el scater: puede ser eso?
que tengo que hacer para recuperar?
Gracias!!!
Bueno, recuperado,
he cargado la vibe 2.0 original y funciona correctamente (aparte que las llamadas no van bien). supongo que no espere lo suficiente al primer boot.
intentare meterle la nueva lolipop a ver si funciona
i installed 2.1 i cant get into the recovery for some reason
Should the mobile be connected to PC to flash the ROM..And can the ROM be flashed without SD card
Directly installed 2.1. Great Rom! Thanks alot. All apps are running smooth
I have a question: Always, when shutting device down and starting new, Android is updating Apps (little white announcement on start screen). Is that normal?
Anyway, unfortunately, I think my S660 is going to die. No GPS and network connection is sometimes completely gone (this was even a problem with original Rom). When there is no network signal, it often helps to remove the metal back cover. Very sad. Still love my S660 for it's great standby time and handy dimensions.