# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JOP40D
ro.build.display.id=JOP40D
ro.build.version.incremental=3.10.28
ro.custom.build.version=S47_A03V2B10_131128
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.1
ro.build.date=2013年 11月 29日 星期五 15:39:33 CST
ro.build.date.utc=1385710773
ro.build.type=user
ro.build.user=builder
ro.build.host=wcc-miui-ota-bd02.bj
ro.build.tags=test-keys
ro.product.model=MI 3
ro.product.brand=Xiao**
ro.product.name=pisc**
ro.product.device=pisc**
ro.product.board=pisc**
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Xiao**
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=pisces
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=pisc**-user 4.2.1 JOP40D 3.10.12 release-keys
ro.build.fingerprint=Xiao**/pisc**/pisc**:4.2.1/JOP40D/3.10.12:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
persist.sys.timezone=Asia/Shanghai
ro.skia.use_data_fonts=1
ro.product.mod_device=Unknown
ro.skia.use_data_fonts=1
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.JB2.MP.V1.30
ro.mediatek.platform=MT6589
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.JB2.MP
ro.mediatek.version.sdk=1
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
# USB BICR function
ro.sys.usb.bicr=yes
# USB Charge only function
ro.sys.usb.charging.only=yes
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ril.specific.sm_cause=0
gps.solution.combo.chip=1
ril.external.md=0
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=2
launcher2.allappsgrid=3d_20
curlockscreen=1
ro.mediatek.gemini_support=true
ro.gemini.smart_3g_switch=0
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
persist.mtk.wcn.combo.chipid=-1
drm.service.enabled=true
fmradio.driver.enable=1
ril.first.md=1
ril.flightmode.poweroffMD=1
ril.telephony.mode=1
ril.radiooff.poweroffMD=0
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=FadeIn.ogg
ro.config.alarm_alert=GoodMorning.ogg
ro.config.ringtone=MI.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Member Info
Tell me the where to get driver for my fake, and how to change the driver in the firmware on my?
Add the firmware in this display driver for Nvidia Tegra 2.
please help! ! ! at the cwm installation on fake mi3 6589 I incidentally didn't clean preloader… now phone doesn't react at all to pressing of buttons and flash tool it doesn't see, but the computer distinguishes it as mediatek da usb vcom port.
Dowload program MTK DroidTools 2.5.3.Запусти this program and subkeys its telephone to computer.If this program will see your telephone,do by this program baсkap and please sweep its baсkap not needrom ,but then by means of this program prepare blocks for Flash Tool.Must be.But I do not guarantee.
please tell me fit this firmware to my phone?Model Mi3
Android version 4.2.1
Firmware communication module MOLY.WR8.W1248.MD.WG.MP.V5.P11.2013/12/23 15.05
Kernel version 3.4.5 builder@taishan #1 Fri Dec 3 15:56:54 CST 2014
The build number JOP40D
Version by user request 888_RU_A03B05_140303
CPU-Z gave:
MT6589 1,2Ghz
ARM Cortex A7
PowerVR SGX 544MP
Model Mi3 (pisces)
Manufacturer Xiaomi
Display JOP40D
armv7I
kernel 3.4.5 (JXCCNAI11.0)
Screen in pixels 540X960
I established this insertion, but touchscreen doesn't work and the screen flickers… I found phone photos when it was on the stock.
I didn't make backup and I can't return to stock firmware, please help me.
Thank you.
I came to the phone running.
but the touch screen does not work …
Is there anyone that can help me in this matter is?
You made some progress with this phone?
no. no development.
home stands as discarded.
I'll try to upload my different software, can one be a good
Hi, I have touchscreen !!!
hello all, my phone is already fully functional, I made port from MIUI v5 rom, I had at the beginning of a problem with the sound, camera, wifi and dial T9, now everything works great
I need your ported rom, please help me