• Title: FEITENG H9500
  • Listed: 04/24/2013 9:33 pm
  • ROM Version: ROM Android 4.2.1
  • You must be logged for ROM download.

Overall Rating : 8

14569 total views, 1 today



Author adMember Info


  • Listed by: SoCr@Te
  • Member Since: 05/15/0470


ROM Mobile FEITENG H9500 – ROM Android 4.2.1

Based on Official FEITENG H9500 version : 20130401_e2006_v89_ht


Features ROM:

1. Add completely ROOT only
2. Other optimization

Language support : Multi Lang


Install ROM :

To unpack Flash run Flash_tool.exe
Select a the in MT6589_Android_scatter_emmc.txt in ROM
Click Flash_tool.exe interface Firmware-> Upgrade

Phone after taking the battery in put something
Connect the data cable
Brush finished with green circles appears


Install with SP MDT:

Unpack the archive N9589-SPM.zip and archive with the ROM

1). Turn off the smartphone. Cable is not connected to the computer.

2). Remove the battery and insert it again

3). Connect your phone to a computer cable. The operating system detects a new device

4). Disconnect the cable from the computer.

5). Run SPMultiPortFlashDownloadProject.exe

6). Choose Database Factory menu> Configuration File data source and specify the file MTK_DATABASE.mdb (it is in the folder SP_MDT).

7). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

8). Click File and select the MT6589_Android_scatter_emmc.txt file (it's in the folder with the rom).

9). The other parameters are fixed, as in the screenshot below.

10). Click "Start all".

11). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer, remove and insert the battery and reconnect it to the computer.

12). After (OK) click Stop and disable any phone.

13). Completed.


And or CWM

Share Button

※Please make a backup of your device before installing or updating ROM

14 Responses to“FEITENG H9500”

  1. 04/25/2013
    Posts: 3


    I can't root this mobile, when use flash tool say, Please make sure all necesary images are checked to be downloaded for "Firmware upgrade"1

  2. SoCr@Te

    Posts: 1015

    problem driver or try : Press F9 (or hit Download button) not Firmware upgrade

  3. 04/25/2013
    Posts: 3


    Ok, i do it whit download, but only enter in factory mode no recovery mode.

  4. 04/25/2013
    Posts: 3


    Now can enter in recovery mode, but can't install superuser

  5. 04/27/2013
    Posts: 3


    there 's no "Android_scatter_emmc.txt file" in the rom folder

  6. 04/28/2013
    Posts: 1



    At the Install Guide it says "9). The other parameters are fixed, as in the screenshot below."

    Cant see no Screenshot :(

    Can you check please

    Thanks ;)

  7. 04/30/2013
    Posts: 1


    I too cannot see the screenshots.

  8. 04/27/2013
    Posts: 5




    when i flash with flashtool, nothing happens. When i flash with sp mdt it flashes.


    When i go to recovery, i cant install zip, I always get installation aborted, why?

    PLease help.



  9. 05/03/2013
    Posts: 7


    how to install? The content is different from the other rom, the file is not "scatter"

  10. 05/09/2013
    Posts: 1

    Viet Nam


Leave a Reply

You must be logged in to post a comment.