DESCRIPTION

ROM HTC SAGA – ROM CM10.1 Android 4.2.1

Install ROM :

1.Connect your HTC Desire S to PC using USB cable.

2.Copy downloaded zip file to the SD card of your phone. Important: Don’t extract any file.

3.Disconnect USB and then turn off your phone.

4.Then, boot into HBOOT by pressing and holding the Volume Down and Power buttons together until the HBOOT menu comes out. From menu navigate Recovery using volume button and select it by pressing Power button. You will be recovery mode soon. Use Volume keys to browse between options in recovery while Power key to select an option. Alternatively try this: Recovery Mode without Key Combination.

5.Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.

6.Then perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is completed.

7.Select install zip from sdcard, then select choose zip from sdcard. Now, locate the flinnycm101_saga_02.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.

9.When installation is completed, go back to the main recovery menu and select reboot system now to reboot the smartphone and boot up into customized Android 4.2.1 ROM. The first boot will take time, so be patient!

※Please make a backup of your device before installing or updating ROM

Donate with PayPal