@echo off

@rem This script is called by x:\Windows\System32\Startnet.cmd – WinPE

@echo.

@echo.

@echo.

@echo Running Intel Optimization powercfg for improved imaging times

@echo.

@echo call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c

call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c

@echo.

@echo.

@rem

@echo.

@rem *****************************************************************

@rem List all the disks, then search the volumes of each one to see

@rem which disks may have "Winpe" in the label. We will ignore that

@rem disk and use the first disk without the Winpe label that we find.

@rem *****************************************************************

@echo.>x:\listdisk.txt

@echo list disk>>x:\listdisk.txt

@echo exit>>x:\listdisk.txt

echo x:\listdisk.txt

@echo call diskpart /s x:\listdisk.txt

call diskpart /s x:\listdisk.txt>x:\Disks.txt

@echo.

@rem Set Disk equal to blank to start

set disk=

@echo.

@rem

@rem This line will write a diskpart script to select the disk and detail it's contents.

@rem We use this output to find a disk that does NOT have Winpe as the volume label.

@rem That disk will have the OS installed to it. This way you can exclude USB from diskpart.

@rem

@rem This works around the issue where the USB key is sometimes enumerated as disk 0 and the

@rem SSD is disk 1.

@rem

for /f "skip=8 tokens=2" %%A in (x:\Disks.txt) do (

@echo sel disk %%A>x:\Par.txt

@echo det disk>>x:\Par.txt

@echo exit>>x:\Par.txt

if NOT "%%A"=="DiskPart…" call :ListPar %%A

)

if "%Disk%"=="" echo No disk found without a volume label of "Winpe"&& set disk=0

@echo Using Disk "%Disk%"

@echo.

@echo.

@rem ************************

@rem UEFI SECTION

@rem ************************

@echo The PC is booted in UEFI mode

@echo.>x:\winpart.txt

@echo select disk "%Disk%">>x:\winpart.txt

@echo clean>>x:\winpart.txt

@echo convert gpt>>x:\winpart.txt

@echo create partition efi size=100>>x:\winpart.txt

@echo format quick fs=fat32 label="System">>x:\winpart.txt

@echo assign letter="S">>x:\winpart.txt

@echo create partition msr size=16>>x:\winpart.txt

@echo create partition primary>>x:\winpart.txt

@echo format quick fs=ntfs label="Windows">>x:\winpart.txt

@echo assign letter="W">>x:\winpart.txt

@echo shrink desired=700>>x:\winpart.txt

@echo create partition primary>>x:\winpart.txt

@echo format quick fs=ntfs label="Recovery">>x:\winpart.txt

@echo assign letter="R">>x:\winpart.txt

@echo set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac">>x:\winpart.txt

@echo gpt attributes=0×8000000000000001>>x:\winpart.txt

@echo exit>>x:\WinPart.txt

@echo Winpart.txt now contains…..

@echo.

type x:\winpart.txt

@echo.

@echo.

@echo *****************************************************************

@echo Setting up the partition table

@echo *****************************************************************

@echo call diskpart /s x:\winpart.txt

diskpart /s x:\winpart.txt

@echo.

@echo.

@echo *****************************************************************

@rem Map drive letter for Install.wim

@echo *****************************************************************

@echo.>x:\ListVol.txt

@echo List volume>>x:\ListVol.txt

@echo exit>>x:\ListVol.txt

@echo call diskpart /s x:\ListVol.txt

call diskpart /s x:\ListVol.txt>x:\Output.txt

@echo.

@echo.

@rem Go through each drive letter, looking for the images\Install.txt file

for /f "skip=8 tokens=3" %%A in (x:\Output.txt) do (

if exist %%A:\images\install.txt set InstallPath=%%A:\images&& echo "Found device with images folder and install.txt file" && goto :Images

)

@echo.

@echo.

@rem Check InstallPath was found and there are images in it.

if NOT EXIST %InstallPath%\Install.swm echo "Install.wim NOT found." && goto :Error

:images

@echo Install.wim FOUND at %InstallPath%\images\install.wim

@echo.

@echo.

@echo Making directories…

md w:\recycler\scratch

if %errorlevel% NEQ 0 echo "Failed to make w:\recycler\scratch directory" && goto :error

@echo.

md r:\recovery\windowsre

if %errorlevel% NEQ 0 echo "Failed to make m:\recovery\windowsre directory" && goto :error

@echo Image Performance times are being stored in %InstallPath%\PerfApply.txt

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Applying the Windows image from the USB with Compact

@echo *****************************************************************

REM set command=DISM /Apply-Image /ImageFile:%InstallPath%\install.wim /Index:1 /ApplyDir:w:\ /Compact /ScratchDir:w:\recycler\SCRATCH

REM call :RunCommand

@echo Elapsed Time is %elapsed%

@echo Image Apply time with Compact is %elapsed% seconds>>%InstallPath%\PerfApply.txt

@echo *****************************************************************

@echo Applying the Windows image from the USB with Compact and Extended Attributes

@echo *****************************************************************

set command=DISM /Apply-Image /ImageFile:%InstallPath%\install.swm /SwmFile:%InstallPath%\install*.swm /Index:1 /ApplyDir:w:\ /Compact /EA /ScratchDir:w:\recycler\SCRATCH

call :RunCommand

@echo Elapsed Time is %elapsed%

@echo Image Apply time with Compact and EA is %elapsed% seconds>>%InstallPath%\PerfApply.txt

@echo.

@echo.

@echo *****************************************************************

@echo Copy over Test tools to \TEST_TOOL

@echo \TEST_TOOL SHOULD BE DELETED PRIOR TO SHIPPING

@echo *****************************************************************

call %WinpeSource%Scripts\7zG.exe x %WinpeSource%TEST_TOOL.zip -oW:\

call %WinpeSource%Scripts\7zG.exe x %WinpeSource%OEM.zip -oW:\recovery\OEM\

xcopy %WinpeSource%SNTOOL w:\SNTOOL\ /cherky

xcopy "%WinPESource%TEST_TOOL\*.*" w:\TEST_TOOL\ /cherky

xcopy "%WinPESource%OA30_TOOL\*.*" w:\OA30_TOOL\ /cherky

xcopy "%WinPESource%lcTest\*" w:\Users\user\Desktop\ /cherky

xcopy w:\Recovery\OEM\Scripts\oobe\*.* w:\Windows\System32\oobe\ /s /y

xcopy %WinPESource%OEM\* w:\recovery\OEM\ /s /y

@rem xcopy %WinPESource%images\LayoutModification.xml W:\Users\Default\AppData\Local\Microsoft\Windows\Shell\ /s /y

@rem move r:\recovery\windowsre\winre.wim w:\Windows\System32\recovery\

@echo.

@echo.

@echo.

@echo *****************************************************************

@rem Move WinRE to Recovery Partition

@echo *****************************************************************

@echo.

@echo Modifying attributes of winre.wim so we can move it.

attrib w:\Windows\System32\recovery\winre.wim -s -h -a -r

@echo move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre

move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre

if %errorlevel% NEQ 0 echo "Failed to move winre.wim to r:\recovery\windowsre" && goto :error

@echo.

@echo reset attributes now

attrib r:\Recovery\Windowsre\winre.wim +s +h +a +r

@echo.

@echo.

@echo *****************************************************************

@echo Setting the boot environment

@echo *****************************************************************

set command=w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all

call :RunCommand

@echo Elapsed Time is %elapsed% seconds

@echo Running BCDBoot time is %elapsed% seconds>>%InstallPath%\PerfApply.txt

@echo.

@echo.

@echo *****************************************************************

@echo Setting the recovery winre boot environment

@echo *****************************************************************

mkdir S:\EFI\Recovery

xcopy /e /h S:\EFI\Microsoft\* S:\EFI\Recovery\

del /a S:\EFI\Recovery\Boot\BCD

del /a S:\EFI\Recovery\Boot\BCD.LOG

bcdedit /createstore S:\BCD

if %errorlevel% NEQ 0 echo "Failed to set recovery information in efi" && goto :error

bcdedit /store S:\BCD /create {bootmgr} /d "Windows Boot Manager"

bcdedit /store S:\BCD /set {bootmgr} device partition=S:

bcdedit /store S:\BCD /set {bootmgr} locale en-US

bcdedit /store S:\BCD /set {bootmgr} integrityservices Enable

if %errorlevel% NEQ 0 echo "Failed to set recovery information in efi" && goto :error

bcdedit /store S:\BCD /create {11111111-1111-1111-1111-111111111111} /d "Windows Recovery" /device

bcdedit /store S:\BCD /set {11111111-1111-1111-1111-111111111111} ramdisksdidevice partition=R:

bcdedit /store S:\BCD /set {11111111-1111-1111-1111-111111111111} ramdisksdipath \Recovery\WindowsRE\boot.sdi

if %errorlevel% NEQ 0 echo "Failed to set recovery information in efi" && goto :error

bcdedit /store S:\BCD /create {22222222-2222-2222-2222-222222222222} /d "Windows Recovery Environment" /application osloader

bcdedit /store S:\BCD /set {bootmgr} default {22222222-2222-2222-2222-222222222222}

bcdedit /store S:\BCD /set {bootmgr} displayorder {22222222-2222-2222-2222-222222222222}

if %errorlevel% NEQ 0 echo "Failed to set recovery information in efi" && goto :error

bcdedit /store S:\BCD /set {default} device ramdisk=[R:]\Recovery\WindowsRE\winre.wim,{11111111-1111-1111-1111-111111111111}

bcdedit /store S:\BCD /set {default} path \Windows\System32\winload.efi

bcdedit /store S:\BCD /set {default} locale en-US

bcdedit /store S:\BCD /set {default} displaymessage "Recovery"

bcdedit /store S:\BCD /set {default} osdevice ramdisk=[R:]\Recovery\WindowsRE\winre.wim,{11111111-1111-1111-1111-111111111111}

bcdedit /store S:\BCD /set {default} systemroot \Windows

bcdedit /store S:\BCD /set {default} nx OptIn

bcdedit /store S:\BCD /set {default} bootmenupolicy Standard

bcdedit /store S:\BCD /set {default} winpe Yes

if %errorlevel% NEQ 0 echo "Failed to set recovery information in efi" && goto :error

xcopy /h S:\BCD* S:\EFI\Recovery\Boot\

if %errorlevel% NEQ 0 echo "Failed to set recovery information in efi" && goto :error

del /a S:\BCD*

if %errorlevel% NEQ 0 echo "Failed to set recovery information in efi" && goto :error

@echo.

@echo.

@echo *****************************************************************

@echo Setting the recovery environment

@echo *****************************************************************

set command=w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows

call :RunCommand

@echo Elapsed Time is %elapsed% seconds

@echo Running reagentc command time is %elapsed% seconds>>%InstallPath%\PerfApply.txt

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Copying over Unattend.xml to use on factory floor if it exists

@echo *****************************************************************

@echo if EXIST %WinPESource%Scripts\Unattend.xml copy %WinPESource%Scripts\Unattend.xml w:\Windows\Panther /y

if EXIST %WinPESource%Scripts\Unattend.xml copy %WinPESource%Scripts\Unattend.xml w:\Windows\Panther /y

if EXIST %WinPESource%Scripts\RealtimeIsUniversal.reg copy %WinPESource%Scripts\RealtimeIsUniversal.reg w:\recovery\OEM\Scripts\ /y

if EXIST w:\recovery\OEM\Scripts\LayoutModification.xml copy w:\recovery\OEM\Scripts\LayoutModification.xml w:\Users\Default\AppData\Local\Microsoft\Windows\Shell /y

xcopy w:\Recovery\OEM\Backup\*.* w:\Windows\System32\oobe\ /s /y

attrib +s +h +i w:\recovery\

@echo.

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Image deployment COMPLETE. Type EXIT from Command

@echo Prompt to restart or turn off device.

@echo *****************************************************************

goto :END

:ERROR

@echo.

@echo An error has been detected.

@echo.

goto :END

:ListPar

@REM This section is to bring a disk number and use it to List Partitions

@echo.

set TempDisk=%1

diskpart /s x:\Par.txt>x:\ParOutput.txt

for /f "skip=26 tokens=4" %%A in (x:\ParOutput.txt) do (

if /i NOT "%%A"=="Winpe" set Disk=%TempDisk%

)

Goto :EOF

:RunCommand

echo.

echo Running %Command%

echo.

REM Convert begin to seconds

set /a begin=(%time:~0,2% * 60 * 60) + (%time:~3,2% * 60) + %time:~6,2%

%Command%

if %errorlevel% NEQ 0 echo "Command Failed." && goto :error

REM Get elapsed seconds

set /a elapsed=((%time:~0,2% * 60 * 60) + (%time:~3,2% * 60) + %time:~6,2%) – %begin%

echo Total time to run this command is %elapsed% seconds

goto :EOF

:END

@rem

@rem Get finish time so we can evaluate total WinPE phase time.

@rem

call |time>x:\StopTime.txt

cd /d w:\windows\system32

call shutdown.exe -s -t 0

@rem

@rem Now parse both files to display the Start and Finish Time

@rem

@echo.

@echo.

for /f "tokens=5" %%A in (x:\starttime.txt) do echo Script Start Time is %%A

for /f "tokens=5" %%A in (x:\stoptime.txt) do echo Script Stop Time is %%A

@echo.