# ALWAYSON_DFOSET=yes, means the features belong to it will enable DFO mechanism
#  no, means disable DFO mechanism for these feature.
ALWAYSON_DFOSET=no

# ALWAYSON_DFOSET_VALUE= , means what features belong to ALWAYSON_DFOSET (for future work).
ALWAYSON_DFOSET_VALUE=MTK_CTA_SUPPORT
AUTO_ADD_GLOBAL_DEFINE_BY_NAME=MOZTEK_POWERUP_SWITCH_LOGO MTK_COMBO_NAND_SUPPORT MTK_ACMT_DEBUG MTK_BT_PROFILE_AVRCP MTK_NVRAM_SECURITY MTK_MMPROFILE_SUPPORT MTK_GPS_SUPPORT MTK_MULTIBRIDGE_SUPPORT MTK_GEMINI_4SIM_SUPPORT EVDO_DT_SUPPORT MTK_CAMCORDER_PROFILE_MID_MP4 MTK_FM_SUPPORT MTK_USES_HD_VIDEO MTK_TABLET_PLATFORM MTK_DUAL_MIC_SUPPORT MTK_AUTO_DETECT_MAGNETOMETER MTK_AUDIO_ADPCM_SUPPORT CUSTOM_KERNEL_OFN MTK_BT_PROFILE_MANAGER MTK_ION_SUPPORT MTK_TVOUT_SUPPORT MTK_FM_RECORDING_SUPPORT MTK_DEDICATEDAPN_SUPPORT MTK_DDR3_SUPPORT MTK_LCA_SUPPORT MTK_AUD_LOCK_MD_SLEEP_SUPPORT MTK_IPV6_SUPPORT MTK_DT_SUPPORT MTK_STEREO3D_WALLPAPER_APP MTK_MATV_SERIAL_IF_SUPPORT MTK_BT_FM_OVER_BT_VIA_CONTROLLER MTK_BT_PROFILE_PBAP MTK_FAT_ON_NAND MTK_BT_PROFILE_A2DP MTK_BT_PROFILE_HFP MTK_BT_PROFILE_AVRCP14 MTK_VOICE_UI_SUPPORT MTK_MASS_STORAGE MTK_BICR_SUPPORT MTK_BT_PROFILE_BIP MTK_BT_PROFILE_BPP MTK_CTPPPOE_SUPPORT MTK_COMBO_QUICK_SLEEP_SUPPORT MTK_THEMEMANAGER_APP MTK_HDR_SUPPORT MTK_TMP103_SUPPORT MTK_DSPIRDBG MTK_TABLET_DRAM MTK_MT8193_SUPPORT MTK_MERGE_INTERFACE_SUPPORT HAVE_AACENCODE_FEATURE MTK_BT_PROFILE_MAPS MTK_FM_50KHZ_SUPPORT MTK_WIFI_HOTSPOT_SUPPORT MTK_TB_DEBUG_SUPPORT MTK_COMBO_SUPPORT MTK_BT_PROFILE_OPP MTK_FLIGHT_MODE_POWER_OFF_MD MTK_MT6572V1_PHONE_POWER_REWORK MTK_BT_PROFILE_MAPC MTK_SHARED_SDCARD MTK_EMMC_DISCARD MTK_2SDCARD_SWAP MTK_MDM_LAWMO MTK_EAP_SIM_AKA MTK_MULTI_STORAGE_SUPPORT MTK_CACHE_MERGE_SUPPORT MTK_MT8193_HDCP_SUPPORT MTK_ENABLE_VIDEO_EDITOR CUSTOM_KERNEL_ACCELEROMETER MTK_WFD_SUPPORT MTK_AUDIO_RAW_SUPPORT MTK_WAPI_SUPPORT MTK_FD_SUPPORT MTK_DISPLAY_HIGH_RESOLUTION HAVE_ADPCMENCODE_FEATURE NAND_OTP_SUPPORT MODEM_UMTS_TDD128_MODE MTK_FACEBEAUTY_SUPPORT MTK_AAL_SUPPORT EVDO_DT_VIA_SUPPORT MTK_BT_SUPPORT MTK_BT_40_SUPPORT MTK_BT_PROFILE_FTP MTK_ASF_PLAYBACK_SUPPORT MTK_CAMERA_BSP_SUPPORT MTK_MT8193_HDMI_SUPPORT MTK_HIGH_QUALITY_THUMBNAIL MTK_IPV6_TETHER_NDP_MODE MTK_FM_RX_SUPPORT MTK_IMAGE_LARGE_MEM_LIMIT MTK_FM_TX_SUPPORT MTK_MDM_FUMO MTK_BRAZIL_CUSTOMIZATION_VIVO MTK_BRAZIL_CUSTOMIZATION_CLARO MTK_ENABLE_MD2 MTK_ENABLE_MD1 HAVE_XLOG_FEATURE MTK_LCA_RAM_OPTIMIZE MTK_RMVB_PLAYBACK_SUPPORT MTK_BT_PROFILE_TIMES MTK_NATIVE_3D_SUPPORT MTK_MEM_PRESERVED_MODE_ENABLE MTK_AUTORAMA_SUPPORT MTK_BT_PROFILE_TIMEC MTK_VOICE_UNLOCK_SUPPORT MTK_UMTS_TDD128_MODE MTK_TETHERING_EEM_SUPPORT MTK_YMAL_SCATTER_FILE_SUPPORT MTK_MATV_ANALOG_SUPPORT MTK_BSP_PACKAGE MTK_SIM_AUTHENTICATION_SUPPORT MTK_BRAZIL_CUSTOMIZATION MTK_BT_PROFILE_SIMAP MTK_LCA_ROM_OPTIMIZE MTK_VT3G324M_SUPPORT MTK_YAML_SCATTER_FILE_SUPPORT MTK_NFC_SUPPORT MTK_NAND_UBIFS_SUPPORT MTK_RADIOOFF_POWER_OFF_MD MTK_MDM_SCOMO CUSTOM_KERNEL_MAGNETOMETER MTK_EMULATOR_SUPPORT MTK_BT_PROFILE_HIDH MTK_BT_PROFILE_PAN MTK_BIP_SCWS MTK_CAMERA_APP_3DHW_SUPPORT MTK_WLAN_SUPPORT MTK_PQ_SUPPORT MTK_TETHERINGIPV6_SUPPORT MTK_UART_USB_SWITCH MTK_IPOH_SUPPORT MTK_AUTO_DETECT_ACCELEROMETER HAVE_CMMB_FEATURE MTK_USES_VR_DYNAMIC_QUALITY_MECHANISM MTK_EMMC_SUPPORT_OTP CUSTOM_KERNEL_GYROSCOPE MTK_TB_APP_CALL_FORCE_SPEAKER_ON MTK_COMBO_CORE_DUMP_SUPPORT MTK_TB_HW_DEBUG MTK_PLATFORM_OPTIMIZE MTK_MULTISIM_RINGTONE_SUPPORT TELEPHONY_DFOSET MTK_PRODUCT_INFO_SUPPORT MTK_2IN1_SPK_SUPPORT MTK_BEAM_PLUS_SUPPORT MTK_QVGA_LANDSCAPE_SUPPORT MTK_FM_SHORT_ANTENNA_SUPPORT MTK_HDMI_SUPPORT MTK_GEMINI_3SIM_SUPPORT MTK_RILD_READ_IMSI MTK_BT_PROFILE_SPP MTK_KERNEL_POWER_OFF_CHARGING MTK_FAN5405_SUPPORT MTK_MT8193_NFI_SUPPORT MTK_DISABLE_POWER_ON_OFF_VOLTAGE_LIMITATION MTK_HW_ENHANCE MTK_NCP1851_SUPPORT MTK_LCEEFT_SUPPORT MTK_BT_PROFILE_DUN MTK_DHCPV6C_WIFI MTK_BT_PROFILE_PRXM MTK_FSCK_MSDOS_MTK MTK_MAV_SUPPORT MTK_IPV6_TETHER_PD_MODE HAVE_AWBENCODE_FEATURE MTK_BQ24196_SUPPORT MTK_WEB_NOTIFICATION_SUPPORT MTK_MD_SHUT_DOWN_NT MTK_SPH_EHN_CTRL_SUPPORT MTK_WB_SPEECH_SUPPORT CUSTOM_KERNEL_ALSPS MTK_BT_PROFILE_PRXR ENCRY_PARTITION_SUPPORT MTK_BT_30_SUPPORT MTK_BQ27541_SUPPORT MTK_SD_REINIT_SUPPORT MTK_SENSOR_SUPPORT MTK_M4U_SUPPORT MTK_EMMC_SUPPORT MTK_BT_21_SUPPORT MTK_S3D_SUPPORT MTK_WLANBT_SINGLEANT MTK6572M_LCM_PATCH MTK6572M_LCM_WVGA_PATCH MOZTEK_APK_SWITCH MZ_FAEA_128FLASH_STORAGE MZ_KEYCODE_HOME_UNLOCK UP_SILENT
AUTO_ADD_GLOBAL_DEFINE_BY_NAME_VALUE=MTK_SIM1_SOCKET_TYPE MTK_TOUCH_PHYSICAL_ROTATION_RELATIVE_TO_LCM MTK_LCM_PHYSICAL_ROTATION LCM_HEIGHT EMMC_CHIP CUSTOM_KERNEL_SSW MTK_SINGLE_3DSHOT_SUPPORT MTK_EXTERNAL_MODEM_SLOT MTK_SHARE_MODEM_SUPPORT MTK_NEON_SUPPORT MTK_SHARE_MODEM_CURRENT CUSTOM_KERNEL_MAIN2_IMGSENSOR LCM_WIDTH MTK_SIM2_SOCKET_TYPE
AUTO_ADD_GLOBAL_DEFINE_BY_VALUE=MTK_PLATFORM CUSTOM_KERNEL_LENS CUSTOM_KERNEL_MAIN_BACKUP_LENS BOOT_LOGO CUSTOM_KERNEL_LCM MTK_MODEM_SUPPORT MTK_ATV_CHIP CUSTOM_KERNEL_MAIN_IMGSENSOR MTK_BT_CHIP MTK_WLAN_CHIP CUSTOM_KERNEL_SUB_BACKUP_IMGSENSOR CUSTOM_KERNEL_MAIN2_BACKUP_IMGSENSOR MTK_IME_INPUT_ENGINE CUSTOM_KERNEL_MAIN_BACKUP_IMGSENSOR CUSTOM_KERNEL_FLASHLIGHT CUSTOM_KERNEL_SUB_IMGSENSOR CUSTOM_KERNEL_SUB_LENS MTK_AUDIO_BLOUD_CUSTOMPARAMETER_REV CUSTOM_KERNEL_IMGSENSOR MTK_FM_RX_AUDIO MTK_COMBO_CHIP MTK_GPS_CHIP CUSTOM_KERNEL_SUB_BACKUP_LENS CUSTOM_KERNEL_MAIN_LENS MTK_FM_TX_AUDIO MTK_FM_CHIP CUSTOM_KERNEL_MAIN2_IMGSENSOR MTK_IME_HANDWRITING_ENGINE CUSTOM_PRODUCT_NAME CUSTOM_LCM_BACKLIGHT CUSTOM_PCB_NAME CUSTOM_KEYPAD_WAKEUP_SYSTEM CUSTOM_MAIN_SENSOR_ROTATE CUSTOM_SUB_SENSOR_ROTATE CUSTOM_MAIN2_SENSOR_ROTATE CUSTOM_KERNEL_TOUCHPANEL CUSTOM_KEYPAD CUSTOM_KERNEL_ALSPS

##############################################################################################################
######################################################################
##### Default apk can't be uninstall

MOZTEK_APK_SWITCH = yes

INPUTMETHOD_MOMOIME_APP = no

SouGouInput = no
XunFeiInput = no
LbeRootManager = no
VOICESEARCH = yes
Gallery2 = no
######################################################################
CUSTOMER_PRODUCT_BRAND = iPhone
CUSTOMER_PRODUCT_MODEL = 6
CUSTOMER_PRODUCT_MANUFACTURER = iPhone
CUSTOMER_PRODUCT_NAME = iPhone

######################################################################
##### Default apk can be uninstall
CUSTOM_THIRD_APP_QQ = no
CUSTOM_THIRD_APP_QZONE = no
CUSTOM_THIRD_APP_TENCENTWEIBO = no
CUSTOM_THIRD_APP_QQSYNC = no
CUSTOM_THIRD_APP_WEIXIN = no

CUSTOM_THIRD_APP_NETEASENEWS = no
CUSTOM_THIRD_APP_YOUDAONOTE = no
CUSTOM_THIRD_APP_NETEASEALBUM = no

CUSTOM_THIRD_APP_BAIDUMAP = no
CUSTOM_THIRD_APP_BAIDUMUSIC = no

CUSTOM_THIRD_APP_SINAWEIBO = no
CUSTOM_THIRD_APP_TIANQITONG = no

#add for co-clock and turn off GPS if no need GPS
CO_CLOCK_SUPPORT = no

#####################################################################
MTK6572M_LCM_PATCH=no
MTK6572M_LCM_WVGA_PATCH=no
CUSTOM_PRODUCT_NAME=CENON72_ET
CUSTOM_LCM_BACKLIGHT=BL_IC_KTD259
CUSTOM_PCB_NAME=PCB_E127
CUSTOM_KEYPAD_WAKEUP_SYSTEM=KEYPAD_WAKE_SYSTEM
CUSTOM_MAIN_SENSOR_ROTATE=MAIN_SENSOR_ROTATE_DEGREE_90
CUSTOM_SUB_SENSOR_ROTATE=SUB_SENSOR_ROTATE_DEGREE_90
CUSTOM_MAIN2_SENSOR_ROTATE=MAIN2_SENSOR_ROTATE_DEGREE_0
CUSTOM_KEYPAD=KEYPAD_IPHONE
UP_SILENT=yes
MOZTEK_POWERUP_SWITCH_LOGO=yes
MOZTEK_ANIM_NUMB=8
##############################################################################################################
#    [2G]:
#    CUSTOM_MODEM=(2G modem name)
#    MTK_VT3G324M_SUPPORT=no
#    MTK_WCDMA_SUPPORT=no
#    MTK_MODEM_SUPPORT=modem_2g
#    MTK_FD_SUPPORT=no
#    MTK_GEMINI_3G_SWITCH=no
#    MTK_FD_FORCE_REL_SUPPORT=no
#    [3G]:
#    CUSTOM_MODEM=(3G modem name)
#    MTK_VT3G324M_SUPPORT=yes
#    MTK_WCDMA_SUPPORT=yes
#    MTK_MODEM_SUPPORT=modem_3g
#    MTK_FD_SUPPORT=yes
#    MTK_GEMINI_3G_SWITCH=yes
#    MTK_FD_FORCE_REL_SUPPORT=yes

#    [Dual SIM]:
#    GEMINI = yes
#    MTK_GEMINI_ENHANCEMENT = yes
#    MTK_GEMINI_3G_SWITCH = yes
#    MTK_SHARE_MODEM_SUPPORT = 2
#    MTK_SHARE_MODEM_CURRENT = 2

#    [Single SIM]:
#    GEMINI = no
#    MTK_GEMINI_ENHANCEMENT = no
#    MTK_GEMINI_3G_SWITCH = no
#    MTK_SHARE_MODEM_SUPPORT = 2
#    MTK_SHARE_MODEM_CURRENT = 1

# Define which modem will be used.
CUSTOM_MODEM=LCZTEK_WE_JB3_BAND5_HSPA

# Set the option to Yes to force to send SCRI message during the screen is on if the network doesn't support R8 Fast Dormancy.
MTK_FD_FORCE_REL_SUPPORT=yes

# Support Fast Dormancy or not
MTK_FD_SUPPORT=yes

# Enable or disable the 3G Switch feature
MTK_GEMINI_3G_SWITCH=no

MTK_GEMINI_SMART_3G_SWITCH=0

# enable Video telephony
MTK_VT3G324M_SUPPORT=yes

# It is used to indicate if current platform support WCDMA feature, but now, this feature isn't be used, it should be removed.
MTK_WCDMA_SUPPORT=yes

# Support GEMINI or not
GEMINI=no

# Enable or disable the GEMINI enhancement
MTK_GEMINI_ENHANCEMENT=no

# Extend our Gemini feature to support daul RIL with single modem logistic.
MTK_SHARE_MODEM_CURRENT=1

# Capability of the underlay modem
#  single or gemini
MTK_SHARE_MODEM_SUPPORT=2

# modem 1 mode.
MTK_ENABLE_MD1=yes
MTK_ENABLE_MD2=no

# 1 = 2g  | 2 = 3g | 3 = wg | 4 = tg
# modem 1 mode.
MTK_MD1_SUPPORT=3
MTK_MD2_SUPPORT=4

# For Platform: MT6573, MT6575 If it is equal to "modem_2g", means only support 2g modem. If it is equal to "modem_3g", means  support 2g and 3g modem
MTK_MODEM_SUPPORT=modem_3g

MTK_UMTS_TDD128_MODE=yes
##############################################################################################################

# touch driver  need to report correct touch axes
CUSTOM_KERNEL_TOUCHPANEL=ft6306_gs
MTK_TOUCH_PHYSICAL_ROTATION_RELATIVE_TO_LCM=180

# To choose LK LCM driver name
CUSTOM_LK_LCM=ili9806e_fwvga_dsi_vdo_ivo rm68172_fwvga_dsi_vdo_ivo_qicai     #rm68172_fwvga_dsi_vdo_cmi

# To set the angle between dimension of UI layout and LCM scan direction
MTK_LCM_PHYSICAL_ROTATION=180
# to choose which boot logo folder would be used, the boot logo folder path is mediatek/custom/common/uboot/logo/
BOOT_LOGO=e127_lca

# To choose kernel LCM driver name
CUSTOM_KERNEL_LCM=ili9806e_fwvga_dsi_vdo_ivo rm68172_fwvga_dsi_vdo_ivo_qicai    #rm68172_fwvga_dsi_vdo_cmi

# To choose uboot LCM driver name
CUSTOM_UBOOT_LCM=ili9806e_fwvga_dsi_vdo_ivo rm68172_fwvga_dsi_vdo_ivo_qicai    #rm68172_fwvga_dsi_vdo_cmi

# To set LCM resolution height size
LCM_HEIGHT=854

# To set LCM resolution width size
LCM_WIDTH=480

# To control resource build. The value would be assigned to PRODUCT_LOCALES under build/target/product/XXX.mk (XXX is each project's name)
MTK_PRODUCT_LOCALES=en_US zh_CN zh_TW hi_IN el_GR fa_IR es_ES ro_RO th_TH ar_EG vi_VN pt_BR my_MM ru_RU tr_TR fr_FR de_DE it_IT in_ID ms_MY pt_PT nl_NL iw_IL hdpi -sw600dp -sw720dp

##############################################################################################################
# NAND vs EMMC    :   
# 1. kernel config set CONFIG_MTK_MTK_NAND y or n
# 2. codegen.dws set NFI or MSDC
# 3. custom_MemoryDevice.h : EMI_CLK 266MHz
# 4. below macro

MTK_COMBO_NAND_SUPPORT=yes

# yes: enable
# no:  disable
MTK_EMMC_DISCARD=no

# eMMC feature enable/disable
MTK_EMMC_SUPPORT=no
# if nand no

# support ont time program on EMMC ,specaily for JRD and MOTO
MTK_EMMC_SUPPORT_OTP=no

# MTK_CACHE_MERGE_SUPPORT = "yes" means enable cache merge feature and "no" disable.
MTK_CACHE_MERGE_SUPPORT=yes
# if nand yes

# Page Size of Nand we used
MTK_NAND_PAGE_SIZE=4K

# Support using UBIFS rather than yaffs2 in NAND
MTK_NAND_UBIFS_SUPPORT=yes
# if nand yes

# To simplify NAND OTP enable procedue.yes: Enable NAND OTP function support,no: Disable NAND OTP function support
NAND_OTP_SUPPORT=no

# Support more than 1 SD card Path is  \Sdcard and \Sdcard\Sdcard2  One card must be always exist \sdcard,  Some write app can save to one of cards storage. Camera,recorder,browser,BT,ATV,CMMB Mount service  can mount multi-storage Media scan will scan all media in both cards File manager can view all cards Usb mass storage for two card is the same behavior mount/umount at same time Setting provide user to select which card want to write
MTK_MULTI_STORAGE_SUPPORT=yes
# if nand yes

MTK_2SDCARD_SWAP=yes
# if nand yes

# For NAND phone such as in EMMC phone with internal sd card, FAT on NAND feature was cut from NAND to be a independent fat partition,and create FAT image file over /fat yaffs2 file system, then let NAND phone can support FAT file system in internal.
MTK_FAT_ON_NAND=yes
# if nand yes

##############################################################################################################

# User space image sensor driver. Define  project used all image sensors. The value is combination of CUSTOM_HAL_MAIN_IMGSENSOR, CUSTOM_HAL_MAIN_BACKUP_IMGSENSOR, CUSTOM_HAL_SUB_IMGSENSOR, and CUSTOM_HAL_SUB_BACKUP_IMGSENSOR
CUSTOM_HAL_IMGSENSOR= hm5065_yuv gc2155_yuv gc0328_yuv sp0a19_yuv

# = CUSTOM_HAL_MAIN_LENS +CUSTOM_HAL_MAIN_BACKUP_LENS + CUSTOM_HAL_SUB_LENS + CUSTOM_HAL_SUB_BACKUP_LENS
CUSTOM_HAL_LENS=sensordrive dummy_lens
CUSTOM_HAL_MAIN2_IMGSENSOR=

# User space image sensor  driver: Main camera  (rear camera) used backup sensor related tuning, setting and calibration information. Value is used main backup sensor name.
CUSTOM_HAL_MAIN_BACKUP_IMGSENSOR=

# lens driver config for main camera
CUSTOM_HAL_MAIN_LENS=sensordrive

# lens driver config for main camera (2nd solution)
CUSTOM_HAL_MAIN_BACKUP_LENS=

# User space image sensor  driver: Main camera (rear camera) used sensor related tuning, setting and calibration information.Value is used main sensor name.
CUSTOM_HAL_MAIN_IMGSENSOR= hm5065_yuv gc2155_yuv

# User space image sensor driver: Sub camera (front camera )used backup sensor related tuning, setting and calibration information. Value is used sub backup sensor name.
CUSTOM_HAL_SUB_BACKUP_IMGSENSOR=

# lens driver config for video telephony camera (2nd solution)
CUSTOM_HAL_SUB_BACKUP_LENS=

# User space driver: Sub camera (front camera )used sensor related tuning, setting and calibration information. Value is used sub sensor name.
CUSTOM_HAL_SUB_IMGSENSOR= gc0328_yuv sp0a19_yuv

# lens driver config for video telephony camera
CUSTOM_HAL_SUB_LENS=dummy_lens

# Kernel space image sensor driver. Define  project used all image sensors .The value is combination of CUSTOM_KERNEL_MAIN_IMGSENSOR, CUSTOM_KERNEL_MAIN_BACKUP_IMGSENSOR, CUSTOM_KERNEL_SUB_IMGSENSOR, and CUSTOM_KERNEL_SUB_BACKUP_IMGSENSOR
CUSTOM_KERNEL_IMGSENSOR= hm5065_yuv gc2155_yuv gc0328_yuv sp0a19_yuv

CUSTOM_KERNEL_MAIN2_BACKUP_IMGSENSOR=
CUSTOM_KERNEL_MAIN2_IMGSENSOR=

# Kernel space image sensor  driver:Main camera (rear camera) used backup sensor driver.Value is used main backup sensor name.
CUSTOM_KERNEL_MAIN_BACKUP_IMGSENSOR=

# same as CUSTOM_HAL_LENS
CUSTOM_KERNEL_LENS=sensordrive dummy_lens

# lens driver config for main camera (2nd solution)
CUSTOM_KERNEL_MAIN_BACKUP_LENS=

# Kernel space image sensor driver:Main camera (rear camera) used sensor driver.Value is used main sensor name.
CUSTOM_KERNEL_MAIN_IMGSENSOR= hm5065_yuv gc2155_yuv

# lens driver config for main camera
CUSTOM_KERNEL_MAIN_LENS=sensordrive

# Kernel space image sensor driver:Sub camera (front camera) used backup sensor driver.Value is used sub backup sensor name.
CUSTOM_KERNEL_SUB_BACKUP_IMGSENSOR=

# lens driver config for video telephony camera (2nd solution)
CUSTOM_KERNEL_SUB_BACKUP_LENS=

# Kernel space image sensor driver:Sub camera (front camera) used sensor driver.Value is used sub sensor name.
CUSTOM_KERNEL_SUB_IMGSENSOR= gc0328_yuv sp0a19_yuv

# lens driver config for video telephony camera
CUSTOM_KERNEL_SUB_LENS=dummy_lens

# User space cameara flashlight driver.You can use this driver to choose cameara flashlight type.
CUSTOM_HAL_FLASHLIGHT=constant_flashlight

# Kernel space cameara flashlight driver. You can use this driver to choose cameara flashlight type.
CUSTOM_KERNEL_FLASHLIGHT=constant_flashlight

 

##############################################################################################################

# M-sensor hal layer library including daemon
CUSTOM_HAL_MSENSORLIB=mmc328x akm8975 ami304 yamaha530 mag3110 akmd8963 bmm050 mc6420 mmc3416x s62xd lsm303md hscdtd006

# accelerometer sensor to detect accelerometer from x y z axis.
CUSTOM_KERNEL_ACCELEROMETER=bma2xx

# ALSPS sensor driverto detect ambint light and the object is close or far awary from device
CUSTOM_KERNEL_ALSPS=pstouch

# gyro driver
CUSTOM_KERNEL_GYROSCOPE=
#mpu3050c

# compass driver to detect compass raw data and report orientatino data
CUSTOM_KERNEL_MAGNETOMETER=
#akm8963

##############################################################################################################

# For audio kernel driver's speaker customization folder definition.
CUSTOM_KERNEL_SOUND=amp_aw8090a

##############################################################################################################

# Add these variables to define the default input method and default input method languages.
DEFAULT_INPUT_METHOD=com.android.inputmethod.pinyin.PinyinIME

# Add these variables to define the default input method and default input method languages.
DEFAULT_LATIN_IME_LANGUAGES=zh_CN th_TH en-US fr ru

##############################################################################################################

# support build CTS or not
BUILD_CTS=no

# Decide whether to build kernel or not.
BUILD_KERNEL=yes

# Decide whether to build lk or not.
BUILD_LK=yes

# The feature option is only applicable to MTK SDK project (banyan_addon). It decides what packages to produce. api: Create MTK SDK API package only (e.g. mtk_sdk_api_addon-10.1.zip) toolset: Create MTK SDK Toolset package only (e.g. mtk_sdk_toolset-1.0.zip) all: Create both MTK SDK API and Toolset package
BUILD_MTK_SDK=

# Decide whether to build preloader or not.
BUILD_PRELOADER=yes

# Decide whether to build uboot or not.
BUILD_UBOOT=no

# User can input ASCII string which is showed in About phone and bootimg header.
CUSTOM_BUILD_VERNO=

# it is used to decide MT6620 combo chip BT and WiFi antenna architecture.  The meaning of each value is defined as follows. Please note that "CUSTOM_HAL_ANT" setting must be consistent with customer's MT6620 antenna architecture layout. Improper setting may lead to BT/WiFi malfunctions
CUSTOM_HAL_ANT=mt6582_ant_m1

# For audio flinger's customization folder
CUSTOM_HAL_AUDIOFLINGER=audio

# configuration for bluetooth device port and baudrate
CUSTOM_HAL_BLUETOOTH=bluetooth

# User space camera driver:Camera related config, tuning setting and info. Assign build load path alps\mediatek\custom\common\hal\camera\camera
CUSTOM_HAL_CAMERA=camera
CUSTOM_HAL_CAM_CAL=dummy_eeprom

# 1. This value is used to control MT6620 patch path 2. mt6620 should be used for when MTK_COMBO_CHIP is set to MT6620E3 or later version.
CUSTOM_HAL_COMBO=mt6572_82

# User space driver : Sensor module might have calibration data such as lens shading. You can adopt it according to EEPROM part number. Now, it's only s24cs64a_eeprom
CUSTOM_HAL_EEPROM=dummy_eeprom

# sensor hal layer common part
CUSTOM_HAL_SENSORS=sensor

# The battery feature is the MUST include feature and can not be disable.This feature provides battery monitor and charging. The system can not boot up without battery.
CUSTOM_KERNEL_BATTERY=battery

# Kernel space image sensor driver: Camera sensor power control. Assign build load path alps\mediatek\custom\common\kernel\camera\camera
CUSTOM_KERNEL_CAMERA=camera
CUSTOM_KERNEL_CAM_CAL=dummy_eeprom

# It define customer kernel src location
CUSTOM_KERNEL_CORE=src

# To enable using driver customization tool for GPIO/EINT/ADC/KEYPAD/PMIC setting
CUSTOM_KERNEL_DCT=dct

# Kernel space driver : Sensor module might have calibration data such as lens shading. You can adopt it according to EEPROM part number. Now, it's only s24cs64a_eeprom
CUSTOM_KERNEL_EEPROM=dummy_eeprom

# detect headset cable plug in and out
CUSTOM_KERNEL_HEADSET=accdet

# key pad driver to report key event
CUSTOM_KERNEL_KPD=kpd

# leds driver including green/red/blue
CUSTOM_KERNEL_LEDS=mt65xx

# RTC driver customization
CUSTOM_KERNEL_RTC=rtc

CUSTOM_KERNEL_SSW=ssw_single

# Configuration for USB PHY
CUSTOM_KERNEL_USB=mt6577

# Support custom to set Vibrator timer.
CUSTOM_KERNEL_VIBRATOR=vibrator

# A mechanism for customer to enable their own sign key.
CUSTOM_PRELOADER_CUSTOM=custom

# Support customer to implement and apply their own RSA security functions
CUSTOM_SEC_AUTH_SUPPORT=no

# Support customer to implement and apply their own RSA security functions
CUSTOM_SEC_SIGNTOOL_SUPPORT=no

# means what features support booting DFO.
DFO_MISC=MTK_ENABLE_MD1 MTK_ENABLE_MD2 MD1_SIZE MD2_SIZE MD1_SMEM_SIZE MD2_SMEM_SIZE MTK_MD1_SUPPORT MTK_MD2_SUPPORT

# DFO_NVRAM_SET describe what feature set support DFO.
DFO_NVRAM_SET=TELEPHONY_DFOSET ALWAYSON_DFOSET OP01_CTS_COMPATIBLE_DFOSET
DISABLE_EARPIECE=no
DMNR_TUNNING_AT_MODEMSIDE=yes

# This feature is for LG encrypt partition
ENCRY_PARTITION_SUPPORT=no

# Identify the project is a EVB project or not.
EVB=no

# To support GSM+CDMA dual talk feature
EVDO_DT_SUPPORT=no

# To support GSM+CDMA dual talk feature, and use VIA solution as CDMA modem.
EVDO_DT_VIA_SUPPORT=no
FEATURE_FTM_AUDIO_TEST=yes

# Distinguish the Google or MTK RIL implementation
GOOGLE_RELEASE_RIL=no

# In Audio record,  Enable/disable AAC encode, yes: enable
# no:disable
HAVE_AACENCODE_FEATURE=yes
HAVE_ADPCMENCODE_FEATURE=yes

# AEE (Android Exception Engine) that designed by Mediatek is an exception catching and debugging information generation mechanism.It can collect and dump information to filesystem (/sdcard/mtklog/aee_exp) when fatel occur(E.g. kernel panic/android system server crash and ..) HAVE_AEE_FEATURE will decide this feature enable or not.
HAVE_AEE_FEATURE=yes

# For audio post processing (Loudness) enable option
HAVE_APPC_FEATURE=no

# In Audio record,  Enable/disable AWB encode, yes: enable
# no:disable
HAVE_AWBENCODE_FEATURE=no

# cmmb feature compile option, if set yes, cmmb can build in load .
HAVE_CMMB_FEATURE=no
HAVE_GROUP_SCHEDULING=no

# HAVE_MTKLOUDNESS_EFFECT=yes, enable MTK loudness effect,HAVE_MTKLOUDNESS_EFFECT=no disable loudness effect
HAVE_MTKLOUDNESS_EFFECT=yes

# Whether support SRS Audio Effect Feature or not
HAVE_SRSAUDIOEFFECT_FEATURE=no

# In Audio record,  Enable/disable VORBIS encode, yes: enable
# no:disable
HAVE_VORBISENC_FEATURE=yes

# It decide whether the system has XLOG mechanism. XLOG is a log filter mechanism which can filter the logs by tag before they are written to log buffer
HAVE_XLOG_FEATURE=yes

# If set this to yes, the files that generated in kernel build time will be at alps/kernel/out folder
KBUILD_OUTPUT_SUPPORT=yes

# modem 1 memory size.
MD1_SIZE=ref:chkMDSize.pl md1

# modem 1 share memory size.
MD1_SMEM_SIZE=0×00200000

# modem 2 memory size.
MD2_SIZE=ref:chkMDSize.pl md2

# modem 2 share memory size.
MD2_SMEM_SIZE=0×00200000
MTK_2IN1_SPK_SUPPORT=no

# yes: enable this feature
# no: disable this feature
MTK_AAL_SUPPORT=no

# For ACMT DEUG use
MTK_ACMT_DEBUG=no
MTK_ACWFDIALOG_APP=no

# Originally designed for ESD(Electrostatic discharge) test. For internal use only.
MTK_ANDROIDFACTORYMODE_APP=no
MTK_API_CHECK=yes

# Operator customized feature, for CU only. List all uninstalled APKs in SD card. When user click an item, install it.
MTK_APKINSTALLER_APP=yes

# speech enhancement in AP side function  enable Flag
MTK_AP_SPEECH_ENHANCEMENT=no

# Auto Scene Detection (ASD) project aims at detecting the scene type of the surrounding environment in a fully automatic manner so that the imaging system could take corresponding actions to produce images of better qualities.
MTK_ASD_SUPPORT=yes

# use  to wrap the ASF playback feature, AS 75 do not supporte the ASF Playback, so set no
MTK_ASF_PLAYBACK_SUPPORT=no

# yes: UI can show "AudEnh" , The system can enhance headset audio effect. User can decide to enable or disable this function.
# no: UI can't show "AudEnh" , The system doesn't enhance headset audio effect.
MTK_AUDENH_SUPPORT=no

# support whether can select MMS ringtone in AudioProfile
MTK_AUDIOPROFILE_SELECT_MMS_RINGTONE_SUPPORT=no
MTK_AUDIO_ADPCM_SUPPORT=yes

# Ape feature control option which is used for switch audio APE format playback: switch on:  MTK_AUDIO_APE_SUPPORT = yes switch off: MTK_AUDIO_APE_SUPPORT = no
MTK_AUDIO_APE_SUPPORT=yes

# MTK_AUDIO_BLOUD_CUSTOMPARAMETER_V4: Use V4 version lib
# None: use default version lib
MTK_AUDIO_BLOUD_CUSTOMPARAMETER_REV=MTK_AUDIO_BLOUD_CUSTOMPARAMETER_V4
MTK_AUDIO_HD_REC_SUPPORT=yes

# yes  means use the mtk Audio Profiles
MTK_AUDIO_PROFILES=yes
MTK_AUDIO_RAW_SUPPORT=yes
MTK_AUD_LOCK_MD_SLEEP_SUPPORT=no

# It can capture panorama picture. We will take maximum 9 pictures merge to one panorama image
MTK_AUTORAMA_SUPPORT=no

# one load to support different accelerometer sensor
MTK_AUTO_DETECT_ACCELEROMETER=no

# one load to support different magnetometer sensor
MTK_AUTO_DETECT_MAGNETOMETER=no

# use to enable/disable AVI playback feature. But, AVI is a default feature in ICS, we will use this macro to switch android AVI and MTK AVI, yes(default) => MTK AVI, no => Android AVI
MTK_AVI_PLAYBACK_SUPPORT=yes

# support BackupAndRestore app
MTK_BACKUPANDRESTORE_APP=no

# Those option is for baidu Location
# All 72 project is it should be set as "no".
MTK_BAIDU_LOCATION_SUPPORT=no
MTK_BAIDU_MAP_SUPPORT=no
MTK_BAIDU_SEARCH_BAR_SUPPORT=no
MTK_BEAM_PLUS_SUPPORT=no

# yes, turn on benchmark boost thermal policy
# no, turn off benchmark boost thermal policy.
MTK_BENCHMARK_BOOST_TP=no
MTK_BICR_SUPPORT=yes

# Support TCP server and TCP client mode channel
# Support multiple channels for BIP
MTK_BIP_SCWS=no
MTK_BQ24158_SUPPORT=no

# yes : support TI bq27541 external gauge IC
# no: not support TI bq27541 external gauge IC
MTK_BQ27541_SUPPORT=no

# Define MTK branch(internal use only)
MTK_BRANCH=MAIN2.1

# Enable Brazil operator common requirements
MTK_BRAZIL_CUSTOMIZATION=no

# Enable Claro operator requirements
MTK_BRAZIL_CUSTOMIZATION_CLARO=no

# Enable TIM operator requirements
MTK_BRAZIL_CUSTOMIZATION_TIM=no

# Enable VIVO operator requirements
MTK_BRAZIL_CUSTOMIZATION_VIVO=no

# support BSP package
MTK_BSP_PACKAGE=no

# When this option set to yes, the Bluetooth stack will comply to Bluetooth Sepc 2.1 (BR/EDR).
MTK_BT_21_SUPPORT=yes

# if it is set to yes: Support Bluetooth 3.0 High Speed if it is set to No: Does not support Bluetooth 3.0 High Speed
MTK_BT_30_HS_SUPPORT=no

# When this option set to yes, the Bluetooth stack will comply to Bluetooth Sepc 3.0 (no High Speed).
MTK_BT_30_SUPPORT=yes

# This feature option means to enable/disable BLE standlone. In Standlone mode, BR/EDR will be disabled.
MTK_BT_40_LE_STANDALONE=no

# When this option set to yes, the Bluetooth stack will comply to Bluetooth Sepc 4.0 (Low Energy).
MTK_BT_40_SUPPORT=no

# Bluetooth chip type
MTK_BT_CHIP=MTK_CONSYS_MT6572

# When this option set to yes, the "FM over Bluetooth (A2DP)" feature will be enabled.
MTK_BT_FM_OVER_BT_VIA_CONTROLLER=no

# yes: enable power saving no: disable power saving
MTK_BT_POWER_EFFICIENCY_ENHANCEMENT=yes

# When this option set to yes, the Bluetooth "Advanced Audio Distribution Profile" (A2DP) will be enabled.
MTK_BT_PROFILE_A2DP=yes

# When this option set to yes, the Bluetooth "Audio/Video Remote Control Profile" (AVRCP) version 1.0 will be enabled.
MTK_BT_PROFILE_AVRCP=yes

# When this option set to yes, the Bluetooth "Audio/Video Remote Control Profile" (AVRCP) version 1.0 will be enabled.
MTK_BT_PROFILE_AVRCP13=no

# When this option set to yes, the Bluetooth "Audio/Video Remote Control Profile" (AVRCP) version 1.4 will be enabled.
MTK_BT_PROFILE_AVRCP14=no

# When this option set to yes, the Bluetooth "Basic Imaging Profile" (BIP) will be enabled.
MTK_BT_PROFILE_BIP=no

# When this option set to yes, the Bluetooth "Basic Printing Profile" (BPP) will be enabled.
MTK_BT_PROFILE_BPP=no

# When this option set to yes, the Bluetooth "Dial-Up Networking Profile" (DUN) will be enabled.
MTK_BT_PROFILE_DUN=no

# When this option set to yes, the Bluetooth "File Transfer Profile" (FTP) will be enabled.
MTK_BT_PROFILE_FTP=no

# When this option set to yes, the Bluetooth "Hands-Free Profile" (HFP) will be enabled.
MTK_BT_PROFILE_HFP=yes

# When this option set to yes, the Bluetooth "Human Interface Devices Profile – Host Role" (HIDH) will be enabled.
MTK_BT_PROFILE_HIDH=yes

# When this option is set to "yes", "Profile Manager" feature will be enabled and advanced UI will be showed.
MTK_BT_PROFILE_MANAGER=yes

# When this option set to yes, the Bluetooth "Message Access Profile – Client Role" (MAPC) will be enabled.
MTK_BT_PROFILE_MAPC=no

# When this option set to yes, the Bluetooth "Message Access Profile – Server Role" (MAPS) will be enabled.
MTK_BT_PROFILE_MAPS=no

# When this option set to yes, the Bluetooth "Object Push Profile" (OPP) will be enabled.
MTK_BT_PROFILE_OPP=yes

# When this option set to yes, the Bluetooth "Personal Area Networking Profile" (PAN) will be enabled.
MTK_BT_PROFILE_PAN=yes

# When this option set to yes, the Bluetooth "Phone Book Access Profile" (PBAP) will be enabled.
MTK_BT_PROFILE_PBAP=yes

# When this option set to yes, the Bluetooth Low Energy "Proximity Profile – Monitor Role" (PRXM) will be enabled.
MTK_BT_PROFILE_PRXM=no

# When this option set to yes, the Bluetooth Low Energy "Proximity Profile – Reporter Role" (PRXR) will be enabled.
MTK_BT_PROFILE_PRXR=no

# When this option set to yes, the Bluetooth "SIM Access Profile" (SIMAP) will be enabled.
MTK_BT_PROFILE_SIMAP=no

# When this option set to yes, the Bluetooth "Serial Port Profile" (SPP) will be enabled.
MTK_BT_PROFILE_SPP=yes

# When this option set to yes, the Bluetooth Low Energy "Time Profile – Client Role" (TIMEC) will be enabled.
MTK_BT_PROFILE_TIMEC=no

# When this option set to yes, the Bluetooth Low Energy "Time Profile – Server Role" (TIMES) will be enabled.
MTK_BT_PROFILE_TIMES=no

# When this option set to yes, the MTK Bluetooth solution will be included.
MTK_BT_SUPPORT=yes
MTK_BWC_SUPPORT=yes

# An calendar event importer to enable sharing events via Bluetooth.
MTK_CALENDAR_IMPORTER_APP=yes

# Encode camcorder output file with MP4 encoder
MTK_CAMCORDER_PROFILE_MID_MP4=no

# This option provides the build-time switch to determine which camera will be build in image(Two candidates: android default camera, Mediatek camera)
MTK_CAMERA_APP=no

# This option provides the build-time switch to determine enable or not camera's 3D related feature
MTK_CAMERA_APP_3DHW_SUPPORT=yes

# yes:MTK extended camera framework no: Android pure camera framework
MTK_CAMERA_BSP_SUPPORT=yes
MTK_CDS_EM_SUPPORT=yes
MTK_CELL_BROADCAST_RECEIVER_SUPPORT=no

# Define hardware chip version
MTK_CHIP_VER=S01

# Decide whether to support mtk image size  check
MTK_CHKIMGSIZE_SUPPORT=yes
MTK_CMAS_SUPPORT=no
MTK_CMCC_MOBILEMARKET_SUPPORT=no

# cmmb chip name
MTK_CMMB_CHIP=

# this feature is used to identify MT6620 chip version. MT6620E3 or later version should be used for this feature
MTK_COMBO_CHIP=MT6572_CONSYS

# valid_value_list = yes,no
MTK_COMBO_CORE_DUMP_SUPPORT=no
MTK_COMBO_QUICK_SLEEP_SUPPORT=no

# used to describe whether WCN combo chip(MT6620/MT6628/MT6629,etc.) is supported or not
MTK_COMBO_SUPPORT=yes

# Indicate uboot what kind of cpu this platform use
MTK_CPU=arm_cortexa7

# Enable CTA requirements
MTK_CTA_SUPPORT=no

# yes: enable feature
MTK_CTPPPOE_SUPPORT=no

# enable the data connection switching notification dailog
MTK_DATADIALOG_APP=no

# yes: enable DataReg solution
# no:  disable DataReg solution
MTK_DATAREG_APP=no
MTK_DATAUSAGELOCKSCREENCLIENT_SUPPORT=no

# This option is for Data Usage Enhancement feature
# When MTK_DATAUSAGE_SUPPORT= yes, should enable MTK_DATAUSAGE_SUPPORT
MTK_DATAUSAGE_SUPPORT=no
MTK_DATA_TRANSFER_APP=yes
MTK_DDR3_SUPPORT=no

# support a dedicated APN when enable tethering
MTK_DEDICATEDAPN_SUPPORT=no

# This feature option is for customer who would like to deafault turn-off data connection. The default setting of data connection will be OFF and notification is sent to notify user the data connection is OFF.
MTK_DEFAULT_DATA_OFF=no

# no: disable this feature
#  yes: enable this feature
MTK_DHCPV6C_WIFI=yes

# It is used to control dialer search feature, and shared by both Java code and native code.
MTK_DIALER_SEARCH_SUPPORT=yes

# support for using digital mic MTK_DIGITAL_MIC_SUPPORT= yes use digital mic MTK_DIGITAL_MIC_SUPPORT= yes use analog mic
MTK_DIGITAL_MIC_SUPPORT=no
MTK_DISABLE_EFUSE=no
MTK_DISABLE_POWER_ON_OFF_VOLTAGE_LIMITATION=yes # hongzhe – no

# Display high resolution cause DRAM bandwidth usage, CPU usage, Memory usage, and Performance has different behavior.
MTK_DISPLAY_HIGH_RESOLUTION=no

# To control whether enable or disable LCD controller dithering feature. If choose yes, LCD controller would do dithering to avoid contour effect, but side effect is that dithering mechanism will make some noises
MTK_DITHERING_SUPPORT=no

# Device Management. For example, collection or configuration parameter's of device, upgrade software, lock or unlock device, wipe data, etc.
MTK_DM_APP=no

# Entrance switch of FOTA in Settings
MTK_DM_ENTRY_DISPLAY=no
MTK_DP_FRAMEWORK=yes

# Enable or disable the DRM1.0 feature this feature is implemented according to OMA DRM v1.0 specification, and is used for dealing with Digital Rights Management (DRM) if any media content provider require it.
MTK_DRM_APP=yes

# Control the DSPIRDBG, which is used to control the log output. Its dafault value is no, would be set to yes by RD when needed. It's depend on MDLogger.
MTK_DSPIRDBG=no

# support dual talk
MTK_DT_SUPPORT=no

# For MTK's dual mic configuration.
MTK_DUAL_MIC_SUPPORT=no

# if this feature option is enabled, then Android OS support eap-sim and eap-aka authentication when using Wi-Fi.
MTK_EAP_SIM_AKA=yes

# When feature option is set to "yes", it implies current build is an emulator type. Module uses this option to check if it should be built for real device or emulator targets.
MTK_EMULATOR_SUPPORT=no

# enable video editor native and java apk
MTK_ENABLE_VIDEO_EDITOR=no

# A utility application on phone that provide convenience supporting method for RDs and customers to debug, test their project.
MTK_ENGINEERMODE_APP=yes

# Used to control InternalEngineerMode.apk
MTK_ENGINEERMODE_INTERNAL_APP=yes

# These feature options are for AT&T related  requirement
MTK_ENS_SUPPORT=no

# yes: support ETWS feature, and  the Application CellBroadcastReceiver should be build in the system.
# no: not support ETWS feature, and CellBroadcastReceiver application will not be build in the system.
MTK_ETWS_SUPPORT=no

# Enable face beautify
MTK_FACEBEAUTY_SUPPORT=no
MTK_FACTORY_MODE_IN_GB2312=yes

# use external charger IC, MTK support
MTK_FAN5405_SUPPORT=no
MTK_FASTBOOT_SUPPORT=yes

MTK_FENCE_SUPPORT=yes

# use this feature option to enable/disable File Manager App
MTK_FILEMANAGER_APP=yes

# MTK_FLIGHT_MODE_POWER_OFF_MD is used to control if modem is powered off when entering flight mode MTK_TELEPHONY_MODE is used for specify current telephony mode MTK_FIRST_MD is used to specify the high priority modem
MTK_FIRST_MD=1

# MTK_FLIGHT_MODE_POWER_OFF_MD is used to control if modem is powered off when entering flight mode MTK_TELEPHONY_MODE is used for specify current telephony mode MTK_FIRST_MD is used to specify the high priority modem
MTK_FLIGHT_MODE_POWER_OFF_MD=yes

# use  to wrap the FLV playback feature, AS 50MP do not include the FLV Playback, so set no
MTK_FLV_PLAYBACK_SUPPORT=yes

# yes: build MTK FMRadio no: not build MTK FMRadio
MTK_FMRADIO_APP=yes

# The feature option is to define if we support FM 50KHz step tune/seek/scan functions
MTK_FM_50KHZ_SUPPORT=no

# define FM TX type digital or analog
MTK_FM_RX_AUDIO=FM_DIGITAL_INPUT

# support FM RX or not
MTK_FM_RX_SUPPORT=yes

# FM short antenna feature option: For FM Radio, when there's no headset,  if short antenna is available,  FM app will switch to short antenna automaticlly
#  For FM Transmitter, short antenna is the default transmit antenna. If target PCB provides short antenna, please set this compile option to "yes", or else set to "no"
MTK_FM_SHORT_ANTENNA_SUPPORT=no

# define FM TX type digital or analog
MTK_FM_TX_AUDIO=FM_ANALOG_OUTPUT
MTK_FOTA_ENTRY=no

# Firmware Upgrade Over The Air
MTK_FOTA_SUPPORT=no

# Low cost phone using increasingly smaller  RAM size, the size of the SD card. Customers  can choose fsck_msdos_mtk to time for space.
MTK_FSCK_MSDOS_MTK=no

# Description: This option provides the build-time switch to turn on/off the entire Gallery3D app. Valid_value_list: yes – Gallery3D will be enabled and built into system image
#  no – Gallery3D will not be built
MTK_GALLERY3D_APP=yes

# Description: Gallery is an application that let user view, share or manipulate images and video on SD card, in other application such as email and so on. Commonly used operations include view/play, share, delete, crop, rotate, set as, view detail. This application has the same usage as Gallery3D and can also be called as Gallery2D to distinguish from Gallery3D.
MTK_GALLERY_APP=yes
MTK_GAMELOFT_AVENGERS_ULC_CN_APP=no
MTK_GAMELOFT_AVENGERS_ULC_WW_APP=no
MTK_GAMELOFT_GLL_CN_APP=no
MTK_GAMELOFT_GLL_ULC_CN_APP=no
MTK_GAMELOFT_GLL_ULC_WW_APP=no
MTK_GAMELOFT_GLL_WW_APP=no
MTK_GAMELOFT_LBC_CN_APP=no
MTK_GAMELOFT_LBC_ULC_CN_APP=no
MTK_GAMELOFT_LBC_ULC_WW_APP=no
MTK_GAMELOFT_LBC_WW_APP=no
MTK_GAMELOFT_SD_CN_APP=no
MTK_GAMELOFT_SD_WW_APP=no
MTK_GAMELOFT_WONDERZOO_ULC_CN_APP=no
MTK_GAMELOFT_WONDERZOO_ULC_WW_APP=no
MTK_GEMINI_3SIM_SUPPORT=no
MTK_GEMINI_4SIM_SUPPORT=no

# Open or close MOTA(Mediatek Over-The-Air) feature. Online firmware upgrade.
MTK_GOOGLEOTA_SUPPORT=no

# To identify which GPS chip be used on current platform.
MTK_GPS_CHIP=MTK_GPS_MT6572

# This feature option is used to distinguish the version of GPU. Different GPU has different shader compiler. We can use correctly shader compiler to compiler our shaders by this option
MTK_GPU_CHIP=MALI400MP1
MTK_GPU_SUPPORT=yes

# HDR is a technique that allows greater dynamic range of luminance between the brightest and darkest areas.
MTK_HDR_SUPPORT=no
MTK_HEADSET_ICON_SUPPORT=yes

# to enable high quality thumbnail. The thumbnail format retrieved by application  will be ARGB8888 instead of RGB565.
MTK_HIGH_QUALITY_THUMBNAIL=yes

# Used to enable hwcomposer
MTK_HWC_SUPPORT=yes
MTK_HWC_VERSION=1.0
MTK_HW_ENHANCE=no

# increase the memory limit value for image  support
MTK_IMAGE_LARGE_MEM_LIMIT=no

# These feature options are for AT&T related  requirement
MTK_IMEI_LOCK=no

# Whether or not the Arabic language input will be supported
MTK_IME_ARABIC_SUPPORT=no

# Whether or not the English language input will be supported. Currently, this option is not used, the English language input is default supported
MTK_IME_ENGLISH_SUPPORT=yes

# Whether or not the French language input will be supported
MTK_IME_FRENCH_SUPPORT=no

# Whether or not the German language input will be supported
MTK_IME_GERMAN_SUPPORT=no

# Define which handwriting engine will be used. Currently, the valid values are "none"and "hanwang". "none"means no handwriting engine will be used. "hanwang"means the hanwang will be used for handwriting engine.
MTK_IME_HANDWRITING_ENGINE=none

# Whether or not the handwriting input will be supported
MTK_IME_HANDWRITING_SUPPORT=no

# Whether or not the Hindi language input will be supported
MTK_IME_HINDI_SUPPORT=no

# Whether or not the Indonesian language input will be supported
MTK_IME_INDONESIAN_SUPPORT=no

# Define which input engine will be used. Currently, the valid values are "none" and "xt9". "none" means no input engine will be used. "xt9" means the xt9 will be used for input engine.
MTK_IME_INPUT_ENGINE=none

# Whether or not the Italian language input will be supported
MTK_IME_ITALIAN_SUPPORT=no

# Whether or not the Malay language input will be supported
MTK_IME_MALAY_SUPPORT=no

# Whether or not the Chinese language input by Pinyin will be supported
MTK_IME_PINYIN_SUPPORT=yes

# Whether or not the Portuguese language input will be supported
MTK_IME_PORTUGUESE_SUPPORT=no

# Whether or not the Russian language input will be supported
MTK_IME_RUSSIAN_SUPPORT=no

# Whether or not the Spanish language input will be supported
MTK_IME_SPANISH_SUPPORT=no

# Whether or not the Chinese language input by stroke will be supported.
MTK_IME_STROKE_SUPPORT=no

# Whether or not the Mediatek IME application will be included in the system
MTK_IME_SUPPORT=no

# Whether or not the Thai language input will be supported
MTK_IME_THAI_SUPPORT=no

# Whether or not the Turkish language input will be supported
MTK_IME_TURKISH_SUPPORT=no

# Whether or not the Vietnam language input will be supported.
MTK_IME_VIETNAM_SUPPORT=no

# Whether or not the Chinese language input by Zhuyin will be supported
MTK_IME_ZHUYIN_SUPPORT=yes

# Support build modem database file into system image under the path: "system/etc/mddb".
MTK_INCLUDE_MODEM_DB_IN_IMAGE=yes

# Whether or not the Pinyin IME application will be included in the system.
MTK_INPUTMETHOD_PINYINIME_APP=yes

# Identify if codebase is built at MTK internal or customer side.  (Don't modify this feature option setting.)
MTK_INTERNAL=no

# To switch language set. Because some language need third party font support, these language should be removed on custom project first to avoid build error. It is no longer valid after ALPS.GB.TDFD_MP.
MTK_INTERNAL_LANG_SET=no
MTK_ION_SUPPORT=yes
MTK_IPOH_SUPPORT=yes

# Instant Power On is a software solution, device can boot up in a configurable time without extra hardware cost
#  It leverages the Android suspend feature to create a new user experience.
MTK_IPO_SUPPORT=yes

# Enable/disable IPv6 Over 3G Modem Feature
MTK_IPV6_SUPPORT=yes
MTK_IPV6_TETHER_NDP_MODE=no
MTK_IPV6_TETHER_PD_MODE=no

# yes means enable iSMS
# no means disable iSMS
MTK_ISMS_SUPPORT=no

# yes : support KPOC feature, power off charging would running by kernel and charging animation by IPO service.
MTK_KERNEL_POWER_OFF_CHARGING=yes

# The feature option is used to decide whether the system load include launcherplus.apk or not. If MTK_LAUNCHERPLUS_APP = yes, include launcherplus.apk
#  MTK_LAUNCHERPLUS_APP = no, do not include launcherplus.apk.
MTK_LAUNCHERPLUS_APP=no

# the feature is used to set the value of the variable "launcher.allappsgrid". if MTK_LAUNCHER_ALLAPPSGRID = yes, launcher.allappsgrid = 3d_20, if MTK_LAUNCHER_ALLAPPSGRID = no, launcher.allappsgrid = 2d.
MTK_LAUNCHER_ALLAPPSGRID=no

# java feature option used to switch on/off launcher unread shortcut feature, show unread number of Email, message, phone and Calendar.
MTK_LAUNCHER_UNREAD_SUPPORT=yes

# Feature option for app launch time improvement.In 72 projects, it should be set as "yes" defaultly.
MTK_LAUNCH_TIME_OPTIMIZE=yes
MTK_LCA_RAM_OPTIMIZE=yes
MTK_LCA_ROM_OPTIMIZE=yes

# For Platform: MT6573 If it is equal to "yes", this will disable some features that are not supposed running in 256MB DRAM system. Make it equal to "no" if the DRAM size of the system is larger than 256MB *Refer the memory customer document please For Platform:MT6575 It is deprecated. For Platform: MT6516 If it is equal to "yes", it will disable some features that are not supposed running in 256MB NAND and 128MB DRAM system. *Refer the memory customer document please
MTK_LCA_SUPPORT=no
MTK_LCEEFT_SUPPORT=yes

# To enable/disable feature Google default live Wallpapers on the project. If MTK_LIVEWALLPAPER_APP = yes all Google default live wallpapers will be built into bootimage and users can use this feature on their device, vice versa.
MTK_LIVEWALLPAPER_APP=yes

# app will decide whether to show effect selection with the value of MTK_LIVE_EFFECT_ENABLE.
MTK_LIVE_EFFECT_ENABLE=no

# it has two values – 1 or 2. 1 stands for google default lockscreen, which we drag the lock bar to right, then the phone can be unlocked. 2 stands for SlideLockScreen,  which we slide the screen up, then the phone can be unlocked.
MTK_LOCKSCREEN_TYPE=1

# Feature option for Log2Server. Log2Server is a feature for send exception log of device to a specific server by mail or by wifi, then the server is handled the log and make a CR with CQ Web.
MTK_LOG2SERVER_APP=no
MTK_LOG2SERVER_INTERNAL=no

# Used to enable or disable multimedia HW to access non-physical-continuous memory. yes: multimedia HW can access non-physical-continuous memory directly. no: multimedia HW can only access physical continuous memory just like other common HW DMA.
MTK_M4U_SUPPORT=yes

# Let persist.sys.usb.config in default.prop as mass_storage.
MTK_MASS_STORAGE=yes

# MTK_MATV_PARALLEL_IF_SUPPORT is used to define mATV video path interface is parallel interface or serial interface.
MTK_MATV_SERIAL_IF_SUPPORT=yes
MTK_MAV_PLAYBACK_SUPPORT=no

# The feature can provide a picutre is like 3D picture. You can wave device left and right then can see the picture display multi-Angle for this image
MTK_MAV_SUPPORT=no

# It's used to control MDLogger which output the Modem Log and Memory dump information.
MTK_MDLOGGER_SUPPORT=yes

# Switch for DM in-house solution.
MTK_MDM_APP=no
MTK_MDM_FUMO=no
MTK_MDM_LAWMO=no
MTK_MDM_SCOMO=no

# "MTK_MD_SHUT_DOWN_NT=yes" means MD HW support show down new technology
# "MTK_MD_SHUT_DOWN_NT=no" means MD HW only support default shut down mode
MTK_MD_SHUT_DOWN_NT=yes

# Provide an option to enable / disable app
MTK_MEDIA3D_APP=no
MTK_MEMORY_COMPRESSION_SUPPORT=yes

# This option is for memory preserved mode feature
#  When the project is on 72 platform, it should be set as "yes", otherwise "no"
#  When MTK_MEM_PRESERVED_MODE_ENABLE = yes,will will build in memory preserved mode in preloader and LK.
MTK_MEM_PRESERVED_MODE_ENABLE=no
MTK_MERGE_INTERFACE_SUPPORT=yes

# For mpeg-4 development stage testing option
MTK_MFV_MPEG4_EXTRA=no

# Multimedia profiling mechanism
MTK_MMPROFILE_SUPPORT=no
MTK_MMUMAP_SUPPORT=no

# mt5192/93 chip support FM radio control option which is only support on mt6516 platform. mt5192/93 FM on:  MTK_MT519X_FM_SUPPORT = yes mt5192/93 off: MTK_MT519X_FM_SUPPORT = no
MTK_MT519X_FM_SUPPORT=no
MTK_MT8193_HDCP_SUPPORT=no
MTK_MT8193_HDMI_SUPPORT=no
MTK_MT8193_NFI_SUPPORT=no
MTK_MT8193_SUPPORT=no

# yes: to include MTKLogger
MTK_MTKLOGGER_SUPPORT=yes

# enable/disable ogm and mtkps playback feature
MTK_MTKPS_PLAYBACK_SUPPORT=no
MTK_MULTIBRIDGE_SUPPORT=no

# Use to set multi sim card ringtone/video call/sip call.
MTK_MULTISIM_RINGTONE_SUPPORT=no

# Enable or disable the lyric file (.lrc) displaying feature. this feature embedded a frame in Music's playback screen, which loads the LRC file stored on sdcard and scrolls it according to the playback duration.
MTK_MUSIC_LRC_SUPPORT=no

# This feature option is for Mobile  Virtual Network Operator (MVNO) support.
MTK_MVNO_SUPPORT=yes

MTK_NATIVE_3D_SUPPORT=no
MTK_NATIVE_FENCE_SUPPORT=no

# Control NEON HW support or not
MTK_NEON_SUPPORT=yes

# yes: turn on this feature
# no:  turn off this feature
MTK_NETWORK_TYPE_ALWAYS_ON=no

# Support different display for available networks. show 2G/3G indication for 3g project.
MTK_NETWORK_TYPE_DISPLAY=no

# Update iptalbes version to 1.4.10 or use Android default iptables(version 1.3.7)
MTK_NEW_IPTABLES_SUPPORT=yes
MTK_NFC_ADDON_SUPPORT=no
MTK_NFC_APP_SUPPORT=no
MTK_NFC_FW_MSR3110=no

# yes: support NFC
#  no: support NFC
MTK_NFC_FW_MT6605=no
MTK_NFC_MSR3110=no
MTK_NFC_MT6605=no

# NFC stands for near field communication. It is a short-range wireless communication technology, which can be used in data exchange, information download, payment application, etc
MTK_NFC_SUPPORT=no

# Support Notpad feature
MTK_NOTEBOOK_SUPPORT=no

# 1. This option is for moto nvram security 2. all project is set to "no" except project mt6577_evb_mt,mt6577_phone_mt,moto77_ics
MTK_NVRAM_SECURITY=no

# enable/disable ogm and mtkps playback feature
MTK_OGM_PLAYBACK_SUPPORT=no

# It is the feature option of a apk called Omacp whose source code path is:  alps/mediatek/source/packages/Omacp.  OMA CP is Client Provisioning, and it is used to modify the application's settings over push message usually from the operator, such as browser's homepage and bookmark, add apn settings, add email account and so on.
MTK_OMACP_SUPPORT=yes

# This option is used to enable or disable OMA download feature in our device.    If this feature option is enable, the device can support OMA download.    If this feature option is disable, the device do not support OMA download.
MTK_OMA_DOWNLOAD_SUPPORT=yes
MTK_OOBE_APP=no
MTK_PCB_BATTERY_SENSOR=no

# This feature option is to define whether we support features for phone number attribution of China (CMCC, CU and CT) MTK_PHONE_NUMBER_GEODESCRIPTION = Yes means that  phone number attribution of China is enabled in current project, vice versa
MTK_PHONE_NUMBER_GEODESCRIPTION=yes

# Enable voice recording function
MTK_PHONE_VOICE_RECORDING=yes

# Enable video multi-media ringtone
MTK_PHONE_VT_MM_RINGTONE=no

# Enable voice answer function
MTK_PHONE_VT_VOICE_ANSWER=no

# Define hardware platfrom
MTK_PLATFORM=MT6572
MTK_PLATFORM_OPTIMIZE=yes

# yes, the UI components are visiable to end users in Settings UI.
#  no, the UI components are invisiable to end users in Settings UI.
MTK_POWER_SAVING_SWITCH_UI_SUPPORT=no
MTK_PQ_SUPPORT=yes

# This feature is designed for customer to store product info file to a new nvram  parititon.
MTK_PRODUCT_INFO_SUPPORT=yes

# "yes" means enable QQbrowser feature and "no" disable.
MTK_QQBROWSER_SUPPORT=no

# This is a legacy feature for MT6516 projects. MT6573 projects do NOT support it, and it should always be set to "no".
MTK_QVGA_LANDSCAPE_SUPPORT=no
MTK_RADIOOFF_POWER_OFF_MD=no

# These feature options are for AT&T related  requirement
MTK_RAT_BALANCING=no

# This feature option is to define if we support features for RAT WCDMA PREFERRED network mode MTK_RAT_WCDMA_PREFERRED = yes means that RAT WCDMA PREFERRED network mode is enabled in current project, vice versa
MTK_RAT_WCDMA_PREFERRED=yes

# Mediatek RCS-e resolution yes: support mediatek RCS-e solution no: NOT support mediatek RCS-e solution
MTK_RCSE_SUPPORT=no

# Define release package for differernt codebase of different customer.(Different customer may get different number of source files)
MTK_RELEASE_PACKAGE=rel_customer_basic rel_customer_platform rel_customer_operator_cu
MTK_RESOURCE_OPTIMIZATION=
MTK_RILD_READ_IMSI=no

# if MTK_RSDM_APP is yes,need to build "rsdm.apk"
MTK_RSDM_APP=no

# use to enable/disable rtp over rtsp feature
MTK_RTP_OVER_RTSP_SUPPORT=yes

# enable/disable rtsp bitrate adaptation feature Add this compile option for RTSP Streaming to do judgement: if enable, support bitrate adaptation
MTK_RTSP_BITRATE_ADAPTATION_SUPPORT=no

# Support stereo 3D display or not
MTK_S3D_SUPPORT=no

# Entry switch of FOTA and SCOMO
MTK_SCOMO_ENTRY=no

# When this feature option is set to true, disable Wi-Fi immediately after user press power key to turn screen off
MTK_SCREEN_OFF_WIFI_OFF=no

# Support SD can Manual Mount/Unmount By User if the SD Card mechanism w/o detect pin.
MTK_SD_REINIT_SUPPORT=no
MTK_SD_SUPPORT=yes

# It is used to control database operation for contacts and call log search, and shared by both Java code and native code.
MTK_SEARCH_DB_SUPPORT=yes

# MTK_SECURITY_SW_SUPPORT=yes==> All security function in pre-loader/LK/kernel/android will be built into software images
# MTK_SECURITY_SW_SUPPORT=no==> All security function in pre-loader/LK/kernel/android will NOT be built into software images
MTK_SECURITY_SW_SUPPORT=yes

# Secure boot means that only trusted image can be booted up on the phone.   Description of option value: (1) ATTR_SBOOT_ENABLE : secure boot will be enabled on the phone (2) ATTR_SBOOT_ENABLE : image won't be checked at boot time (3) ATTR_SBOOT_ONLY_ENABLE_ON_SCHIP : secure boot is only enabled on security chip (that's the default setting)
MTK_SEC_BOOT=ATTR_SBOOT_ONLY_ENABLE_ON_SCHIP

# MTK provides secure chip.  With this type of chip, security protection will be enhanced.  Description of option value: (1) yes : software can support security chip (that's the default setting) (2) no : software is only compatible with normal chip
MTK_SEC_CHIP_SUPPORT=yes

# If this feature is enabled, then only trusted modem load can be booted up  Description of option value: (1) yes : target will authenticate it at boot time (2) no : target won't verify modem load
MTK_SEC_MODEM_AUTH=no

# If this feature is enabled, modem load will be encrypted  Description of option value: (1) yes : modem image will be encrypted at build time (2) no : modem image won't be encrypted
MTK_SEC_MODEM_ENCODE=no

# yes ==> Enable MODEM NVRAM anti-clone
#  no ==> Disable Modem NVRAM anti-clone
MTK_SEC_MODEM_NVRAM_ANTI_CLONE=no

# to enable modem secro support MTK_SEC_SECRO_AC_SUPPORT yes : enable modem secro support no : disable modem secro support
MTK_SEC_SECRO_AC_SUPPORT=yes

# Secure download means that only trusted image can be downloaded into the phone.   Description of option value: (1) ATTR_SUSBDL_ENABLE : secure download will be enabled on the phone (2) ATTR_SUSBDL_ENABLE : image won't be checked at download time (3) ATTR_SUSBDL_ONLY_ENABLE_ON_SCHIP : secure download is only enabled on security chip (that's the default setting)
MTK_SEC_USBDL=ATTR_SUSBDL_ONLY_ENABLE_ON_SCHIP

# support send read report when received a mms with replying read report request.
MTK_SEND_RR_SUPPORT=yes

# sensor config to sensor port sensor feature in project
MTK_SENSOR_SUPPORT=yes

# sdcard will be a folder of /data
MTK_SHARED_SDCARD=no

# A mechanism for customer to enable their own sign key.
MTK_SIGNATURE_CUSTOMIZATION=no
MTK_SIGNMODEM_SUPPORT=yes

# MTK_SIM1_SOCKET_TYPE=1: support type 1 socket type
# MTK_SIM1_SOCKET_TYPE=2: support type 2 socket type
MTK_SIM1_SOCKET_TYPE=1

# MTK_SIM1_SOCKET_TYPE=1: support type 1 socket type
# MTK_SIM1_SOCKET_TYPE=2: support type 2 socket type
MTK_SIM2_SOCKET_TYPE=1
MTK_SIM_AUTHENTICATION_SUPPORT=no
MTK_SIM_HOT_SWAP=yes

# This feature option is to define if we support features for SIM Recovery
MTK_SIM_RECOVERY=yes

# MTK_SINA_WEIBO_SUPPORT= "yes" means enable Sina weibo feature and "no" disable.
MTK_SINA_WEIBO_SUPPORT=no

# Control snigle cam 3d capture support or not
MTK_SINGLE_3DSHOT_SUPPORT=no
MTK_SIP_SUPPORT=no

# enhance Gemini data connection behavior
MTK_SMARTSWITCH_SUPPORT=no

# if MTK_SMSREG_APP=yes,build SmsReg.apk
MTK_SMSREG_APP=yes

# A mechansim to filter malicious charging SMS.
MTK_SMS_FILTER_SUPPORT=yes

# Enable National language coding
MTK_SMS_NATIONAL_LANGUAGE_SUPPORT=no

# Enable Turkish language coding
MTK_SMS_TURKISH_TABLE_ALWAYS_SUPPORT=no

# Setting this feature option to "yes" will implement MTK Facebook support applications in the project, has dependency on MTK_SNS_SUPPORT
MTK_SNS_FACEBOOK_APP=no

# Setting this feature option to "yes" will implement MTK Flickr support applications in the project, has dependency on MTK_SNS_SUPPORT
MTK_SNS_FLICKR_APP=no

# Setting this feature option to "yes" will implement MTK KAIXIN support applications in the project, has dependency on MTK_SNS_SUPPORT
MTK_SNS_KAIXIN_APP=no

# Setting this feature option to "yes" will implement MTK RENREN support applications in the project, has dependency on MTK_SNS_SUPPORT
MTK_SNS_RENREN_APP=no

# It controls if WeiboAccountService will be build into system image
MTK_SNS_SINAWEIBO_APP=no
MTK_SNS_SINAWEIBO_TEST=no

# Setting this feature option to "yes" will implement MTK SNS applications in the project
MTK_SNS_SUPPORT=no

# Setting this feature option to "yes" will implement MTK TWITTER support applications in the project, has dependency on MTK_SNS_SUPPORT
MTK_SNS_TWITTER_APP=no

# This option provides the build-time switch to turn on/off the selection of recording format . Valid_value_list: yes to enable the selection of recording format to build
#  no -  disable
MTK_SOUNDRECORDER_APP=no

# When enable, executing factory reset will preserve the data in /data/app/
MTK_SPECIAL_FACTORY_RESET=no

# yes means reporting specific SM cause to framework from RIL
# no means not report ing specific SM cause to framework from RIL.
MTK_SPECIFIC_SM_CAUSE=no
MTK_SPH_EHN_CTRL_SUPPORT=yes

# yes: enable
# no:  disable
MTK_STEREO3D_WALLPAPER_APP=no

# set MTK_SUPPORT_MJPEG = yes to enable motion jpeg playback.
MTK_SUPPORT_MJPEG=yes
MTK_SWIP_AAC=no

# libvorbisdec_mtk
MTK_SWIP_VORBIS=yes
MTK_SYSTEM_UPDATE_SUPPORT=yes

# Force speaker on while make a call or accept a call on tablet
MTK_TB_APP_CALL_FORCE_SPEAKER_ON=no

# it adds for supporting the tablet application to display UI layout in landscape mode
MTK_TB_APP_LANDSCAPE_SUPPORT=no
MTK_TB_DEBUG_SUPPORT=no

# Internal hardware debug function support
MTK_TB_HW_DEBUG=no

# MTK_FLIGHT_MODE_POWER_OFF_MD is used to control if modem is powered off when entering flight mode MTK_TELEPHONY_MODE is used for specify current telephony mode MTK_FIRST_MD is used to specify the high priority modem
MTK_TELEPHONY_MODE=3

# "yes" means enable Tencent mobile manager(normal version) feature and "no" disable.
MTK_TENCENT_MOBILE_MANAGER_NORMAL_SUPPORT=no

# "yes" means enable Tencent mobile manager(slim version) feature and "no" disable.
MTK_TENCENT_MOBILE_MANAGER_SLIM_SUPPORT=no

# support tethering over ipv6
MTK_TETHERINGIPV6_SUPPORT=yes

# support tethering over eem in Linux or MacOS PC
MTK_TETHERING_EEM_SUPPORT=no

# Whether to enable/disable ThemeManager feature, ThemeManager is a feature which maintains themes exist in device, and make it possible for user to change the current skin of device.
MTK_THEMEMANAGER_APP=no
MTK_TINY_UTIL=yes
MTK_TLR_SUPPORT=no

# yes: enable
# no:  disable
MTK_TMP103_SUPPORT=no

# Todos is a new feature only for CMCC proejcts. With this apk, users could create, edit and view their To-do things.
MTK_TODOS_APP=yes

# For TTY function enable option.
MTK_TTY_SUPPORT=yes

# To control whether enable or disable TV-out feature. If choose yes, video or image on your phone can be demonstrated on TV via TV-out cable. Also, this feature can help user to get more fun when playing some games.
MTK_TVOUT_SUPPORT=no

# Support share USB DP/DM as UART TX/RX.
MTK_UART_USB_SWITCH=yes

# USB Audio Function Enable Flag
MTK_USB_AUDIO_SUPPORT=yes

# use  to define the Video Max supported resolution, if MTK_USES_HD_VIDEO=yes, will support the 720P as the MAX video resolution. Else will support D1 as the MAX resolution
MTK_USES_HD_VIDEO=no

# For StageFright's MTK codec switch option. "yes" => default codec without MTK modification.
MTK_USES_STAGEFRIGHT_DEFAULT_CODE=no
MTK_USES_VR_DYNAMIC_QUALITY_MECHANISM=yes
MTK_USE_ANDROID_MM_DEFAULT_CODE=no
MTK_USE_RESERVED_EXT_MEM=no

# Video widget is a app widget application that user can play video in launcher(pick a video from Gallery or Gallery3D),  it can be used as mini version of video player.
MTK_VIDEOWIDGET_APP=no

# support video record and playback to 1080p  resolution
MTK_VIDEO_1080P=no

# Provide an option to enable/disable app widget:video favorites
MTK_VIDEO_FAVORITES_WIDGET_APP=no
MTK_VIDEO_THUMBNAIL_PLAY_SUPPORT=no

# To enable/disable feature Video Wallpaper on the project. If MTK_VLW_APP = yes MtkVideoLiveWallpaper.apk will be built into bootimage and users can use this feature on their device, vice versa.
MTK_VLW_APP=no
MTK_VOICE_UI_SUPPORT=no
MTK_VOICE_UNLOCK_SUPPORT=no

# This feature option is to define if we need to enable/disable auto answer function when virtual sim is on/off
MTK_VSIM_AUTO_ANSWER=no

# Use this option to enable/disable  VSS feature.
MTK_VSS_SUPPORT=no
MTK_WAIT_SYNC_SUPPORT=no

# This feature option is used for receiving Wap Push message or not. If MTK_WAPPUSH_SUPPORT=yes, the device can receive Wap Push Message sent by operator. Users can read Wap Push Message in Mms inbox.
MTK_WAPPUSH_SUPPORT=yes

# The option controls whether this load support WB speech parameter. Because WB speech capability is controlled by Modem now, users should enable this feature option.
MTK_WB_SPEECH_SUPPORT=yes

# the switcher of turn on /off weather3d  widget
MTK_WEATHER3D_WIDGET=no

# The weather information retrieval engine and provider.
MTK_WEATHER_PROVIDER_APP=yes

# A widget shows weather information provided by Yahoo!
MTK_WEATHER_WIDGET_APP=no
MTK_WEB_NOTIFICATION_SUPPORT=yes

# Define MTK weekly number(internal use only)
MTK_WEEK_NO=W10.24

# yes/no
MTK_WFD_SUPPORT=no

# enable WIFI P2P (called wifi direct also) functionality. If turn on this feature, we provide three application based on it. They are contactsSync, FileSharing, Vedio&Audio sharing.  Via ContactsSync, users can exchange businessCard easily.  Via FileSharing, users can free share files each other. Via Audio&Vedio sharing, user can play MP4/MP3/3GP files reside on remote phone
MTK_WIFI_P2P_SUPPORT=no

# configuration for WLAN and BT single antenna feature.
MTK_WLANBT_SINGLEANT=no

# Define the wlan chip type
MTK_WLAN_CHIP=

# This feature option is used for displaying wml web page or not. If MTK_WML_SUPPORT=true, browse can display simple wml web page normally. This feature option only is used for cmcc streaming test.
MTK_WML_SUPPORT=yes

# Standalone feature option for World Clock Widget.
MTK_WORLD_CLOCK_WIDGET_APP=no

# This feature option is a flag for such situation.  If it is turned on(yes), this load will satisfy WFA's request of supplying separate WPA and WPA2 security type. Else only WPA/WPA2 PSK will be shown to user. But now, we implement this by system property which can be set in Engineer mode. So this feature option is not needed any more.
MTK_WPA2PSK_SUPPORT=no

# yes: to enable this WV-DRM feature no: to disable this WV-DRM feature
MTK_WVDRM_SUPPORT=yes
MTK_YAML_SCATTER_FILE_SUPPORT=yes

# a utility application that is relative to engineer mode, provide support on testing of GPS function.
MTK_YGPS_APP=yes

# it is a switch for Yahoo properties file and placement configuration. Used to make Yahoo client to communicate with Yahoo server and place Yahoo client to the specific location
MTK_YMCAPROP_SUPPORT=no

# multi-channel audio playback support
MULTI_CH_PLAYBACK_SUPPORT=no

NATIVE_AUDIO_PREPROCESS_ENABLE=yes
NO_INIT_PERMISSION_CHECK=yes
OP01_CTS_COMPATIBLE=no
OP01_CTS_COMPATIBLE_DFOSET=no
OP01_CTS_COMPATIBLE_DFOSET_VALUE=OP01_CTS_COMPATIBLE

# It's used to define which operator you will support. If it's not operator load, the value is NONE(default value). The values may be: OP01_SPEC0200_SEGC(for CMCC), OPO2_SPEC0200_SEGA(for CU)
OPTR_SPEC_SEG_DEF=NONE
PLATFORM_MTK_SDK_VERSION=1

# use to differentiate the project UI which use the some density resource . Just like the QHD resolution and WQVA resolution , they all use the hdpi resources, if you want to support this two projects ,  you do not need two code base ,you can use  RESOURCE_OVERLAY_SUPPORT  = hdpi to differentiate the QHD and WQVA in one code base. It could overlay the resources in build stage.
RESOURCE_OVERLAY_SUPPORT=generic LCA_ram LCA_rom

# This is used to select the ARM architecture when building Android. For example, if armv6 is set, build/core/combo/arch/arm/armv6.mk will be used for building Android. Then ARMv6 related configurations will be set properly in the CFLAGS.
TARGET_ARCH_VARIANT=armv7-a-neon

# TELEPHONY_DFOSET decribe this DFO set enable or disable.
TELEPHONY_DFOSET=no

# TELEPHONY_DFOSET_VALUE describe what features in this DFO feature set.
TELEPHONY_DFOSET_VALUE=MTK_DT_SUPPORT MTK_TELEPHONY_MODE MTK_SHARE_MODEM_SUPPORT MTK_SHARE_MODEM_CURRENT MTK_ENABLE_MD1 MTK_ENABLE_MD2 MTK_FIRST_MD
USE_OPENGL_RENDERER=true

# WIFI_WEP_KEY_ID_SET: yes, show WEP key  id set item
#  no, hide WEP key id set item.
WIFI_WEP_KEY_ID_SET=no

# WIFI_WPS_PIN_FROM_AP: yes, show WPS pin from ap item
#  no, hide WPS pin form ap item.
WIFI_WPS_PIN_FROM_AP=no

# Used in FM driver and Native lib makefiles to decide which chip driver will be build
MTK_FM_CHIP=MT6627_FM

# For FM record function enable option.
MTK_FM_RECORDING_SUPPORT=yes

# The root switch of Android FM, if  "no", all features(RX&TX) of FM will be removed from android system
#  If you need use one or more FM features, please keep it as "yes"
MTK_FM_SUPPORT=yes

# FM transmitter switch: If "no" FM TX related features will be removed
#   if "yes", FM TX feature will be built in system.
MTK_FM_TX_SUPPORT=no

# It is a feature option to enable or disable the support of A-GPS (Assisted-GPS). A-GPS is a system which can improve the C-TTFF (Cold Time-to-First-Fix) of a GPS satellite-based positioning system.
MTK_AGPS_APP=yes

# Be used to switch GPS feature on the platform. Set "yes" to turn on and set "no"(with MTK_AGPS_APP=no at the same time) to turn off.
MTK_GPS_SUPPORT=yes

# Specify HDMI external IC type.
CUSTOM_KERNEL_HDMI=

# To control whether enable or disable HDMI feature. If choose yes,  phone's screen can be demonstrated on TV via HDMI cable.
MTK_HDMI_SUPPORT=no

# mATV feature control option which is used for swithing on/off mATV feature: switch on:  HAVE_MATV_FEATURE = yes switch off: HAVE_MATV_FEATURE = no
HAVE_MATV_FEATURE=no

# mATV chip select option: but MTK_MT5192 is only support on mt6516 platform
MTK_ATV_CHIP=

# mATV audio path mode selection: analog path:  MTK_MATV_ANALOG_SUPPORT = yes I2S path: MTK_MATV_ANALOG_SUPPORT = no
MTK_MATV_ANALOG_SUPPORT=no

# if it is set to TRUE: Support WAPI (WLAN Authentication and Privacy Infrastructure) if it is set to FALSE: Does not Support WAPI (WLAN Authentication and Privacy Infrastructure)
MTK_WAPI_SUPPORT=yes

# To enable Wi-Fi Tethering in the Wi-Fi Setting UI * valid_value_list = Yes or No (Yes: Enable, No: Disable)  * dependency_relationship need MTK_WLAN_SUPPORT = yes
MTK_WIFI_HOTSPOT_SUPPORT=yes

# The Wlan switch for the wlan feature in the Android(app, framework, native, kernel).
MTK_WLAN_SUPPORT=yes

MZ_FAEA_128FLASH_STORAGE = yes
MZ_KEYCODE_HOME_UNLOCK = yes
#adupsfota start
ADUPS_FOTA_SUPPORT = yes
ADUPS_FOTA_WITH_ICON = no
ADUPS_FOTA_WITHOUT_MENU=no
#adupsfota end
SPECIAL_SECRECT_CODE=no
#Added by dhy in 12-6
USING_SYSTEM_FOTA=no

CUSTOM_BUILD_VERNO = v.s.150421