@echo off

title Rev:10.1.0.0

rem This script is called by x:\Windows\System32\Startnet.cmd – WinPE
rem *******************************************************************
rem  FLASH_BIOS=1  Auto flash BIOS
rem  FLASH_BIOS=0  Do not auto flash BIOS
rem *******************************************************************

set FLASH_BIOS=0

rem *******************************************************************
set PPKG_FILE=1
set SPP_FILE=1
set SINGLE_OS=0
set SINGLE_INSTANCE=1
rem *******************************************************************

@echo.
@echo Running Intel Optimization powercfg for improved imaging times
@echo.
@echo call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
@echo.
if "%1"=="PXE" (
 set WinPESource=y:\
) else (
 set WinPESource=%WinPESource%
)
@echo.
set SCRIPTS_PATH=%WinPESource%Scripts
set IMAGES_PATH=%WinPESource%Images
@echo.
rem  *****************************************************************
rem  List all the disks, then search the volumes of each one to see
rem  which disks may have "Winpe" in the label. We will ignore that
rem  disk and use the first disk without the Winpe label that we find.
rem  *****************************************************************
@echo.>x:\listdisk.txt
@echo list disk>>x:\listdisk.txt
@echo exit>>x:\listdisk.txt
echo x:\listdisk.txt
@echo call diskpart /s x:\listdisk.txt
call diskpart /s x:\listdisk.txt>x:\Disks.txt
if %ERRORLEVEL% NEQ 0 echo Diskpart error && goto :Error
rem Set Disk equal to blank to start
@echo.
rem
rem  This line will write a diskpart script to select the disk and detail it's contents.
rem  We use this output to find a disk that does NOT have Winpe as the volume label.
rem  That disk will have the OS installed to it. This way you can exclude USB from diskpart.
rem 
rem  This works around the issue where the USB key is sometimes enumerated as disk 0 and the
rem  SSD is disk 1.
rem 
@echo Select Disk which eMMC
call :SelectDisk
if "%Disk%"=="" echo eMMC not found && goto :ERROR
@echo.
@echo *****************************************************************
@echo  Checkup SingleOS or DualOS or whether exist windows partiton
@echo *****************************************************************
rem create diskpart script for search windows partitions from emmc disk
@echo.>x:\ListPar.txt
@echo select disk %Disk% >>x:\ListPar.txt
@echo list partition >>x:\ListPar.txt
@echo exit >>x:\ListPar.txt
@echo.
rem run diskpart script
diskpart /s x:\ListPar.txt >x:\eMMCPar.txt
if %ERRORLEVEL% NEQ 0 echo Diskpart error && goto :Error
@echo.
rem SingleOS / DualOS switch
find "Partition 10" x:\eMMCPar.txt >nul
if %ERRORLEVEL% NEQ 0 set OS=SingleOS&& goto artition
@echo Lis Vol>x:\FindVol.txt
diskpart /s x:\FindVol.txt>x:\VolumeList.txt
rem set android volume hide
@echo. >x:\HideVol.txt
@echo select disk %Disk%>>x:\HideVol.txt
for /f "tokens=2,5" %%i in ('type x:\VolumeList.txt ^| find "RAW"') do (
 if "%%j"=="Partition" (
  @echo Select Volume %%i >>x:\HideVol.txt
  @echo attributes volume set hidden >>x:\HideVol.txt
 )
)
@echo call diskpart /s x:\HideVol.txt
call diskpart /s x:\HideVol.txt
rem ensure it's DualOS,and check whether exist windows partition,if not:create the new windows partition
rem rem find "Partition 16" x:\eMMCPar.txt >nul
rem rem if %ERRORLEVEL% NEQ 0 set OS=DualOS&& goto artition
@echo. >x:\WinPar.txt
@echo. >x:\DelPar.txt
@echo select disk %Disk%>>x:\WinPar.txt
@echo select disk %Disk%>>x:\DelPar.txt
for /f "skip=1 tokens=2" %%i in ('type x:\eMMCPar.txt ^| find "Partition"') do (
 @echo select disk %Disk%>x:\WinPar.txt
 @echo select Partition %%i>>x:\WinPar.txt
 @echo detail partition >>x:\WinPar.txt
 @echo exit >>x:\WinPar.txt
 diskpart /s x:\WinPar.txt>x:\ParPro.txt
 if %ERRORLEVEL% NEQ 0 echo Diskpart error && goto :Error
 for /f %%j in ('type x:\ParPro.txt ^| find /c "de94bba4-06d1-4d40-a16a-bfd50179d6ac"') do (
  if "%%j"=="1" echo select disk %Disk%>x:\DelPar.txt
  if "%%j"=="1" echo select partition %%i  
  if "%%j"=="1" echo select partition %%i >>x:\DelPar.txt  
  if "%%j"=="1" echo delete Partition override >>x:\DelPar.txt
  if "%%j"=="1" echo exit >>x:\DelPar.txt
  if "%%j"=="1" diskpart /s x:\DelPar.txt 
 )
 for /f %%j in ('type x:\ParPro.txt ^| find /c "ebd0a0a2-b9e5-4433-87c0-68b6b72699c7"') do (
  if "%%j"=="1" (
   for /f %%k in ('type x:\ParPro.txt ^| find /c "RAW"') do (
   if "%%k"=="0" echo select disk %Disk%>x:\DelPar.txt
   if "%%k"=="0" echo select partition %%i
   if "%%k"=="0" echo select partition %%i >>x:\DelPar.txt
   if "%%k"=="0" echo delete Partition override >>x:\DelPar.txt
   if "%%k"=="0" echo exit >>x:\DelPar.txt
   if "%%k"=="0" diskpart /s x:\DelPar.txt
   )
  )
 )
 for /f %%j in ('type x:\ParPro.txt ^| find /c "e3c9e316-0b5c-4db8-817d-f92df00215ae"') do (
  if "%%j"=="1" echo select disk %Disk%>x:\DelPar.txt
  if "%%j"=="1" echo select partition %%i
  if "%%j"=="1" echo select partition %%i >>x:\DelPar.txt
  if "%%j"=="1" echo delete Partition override >>x:\DelPar.txt
  if "%%j"=="1" echo exit >>x:\DelPar.txt
  if "%%j"=="1" diskpart /s x:\DelPar.txt
 )
)
set OS=DualOS&& goto artition

artition
@echo *****************************************************************
@echo   Map drive letter for Install.wim
@echo *****************************************************************
set InstallPath=%IMAGES_PATH%&& echo "Found images folder at USB drive"
@echo.
rem Check InstallPath was found and there are images in it.
@echo.
setlocal enabledelayedexpansion
cd /d %InstallPath%
set num=""
for /f "delims=" %%i in ('dir /a-d /b *.wim') do (
 set /a num+=1
 if "!num!" == "!num!" (
  set WIM_NAME!num!=%%~ni
  set WIM_SIZE_NAME!num!=%%~zi
  )
)
if NOT "%WIM_NAME3%"=="" echo Can not select *.WIM && goto :Error
setlocal enabledelayedexpansion
cd /d %InstallPath%
set num=""
for /f "delims=" %%i in ('dir /a-d /b /on *.swm') do (
 set /a num+=1
 if "!num!" == "!num!" (
  set SWM_NAME!num!=%%~ni
  set SWM_NUM=!num!
 )
)
if NOT "%SWM_NUM%"=="" (
 echo Found *.swm at images path
 set TARGET_WIM=%SWM_NAME1%
 set RE_WIM=%WIM_NAME2%
 set RE_WIM_SIZE=%WIM_SIZE_NAME2%
 if /i "%RE_WIM%"=="Winre" (
  set RE_WIM=%WIM_NAME1%
  set RE_WIM_SIZE=%WIM_SIZE_NAME1%
 )
)
if "%SWM_NUM%"=="" (
 echo Found *.wim at images path
 if /i "%WIM_NAME1%"=="Winre" (
  set TARGET_WIM=%WIM_NAME2%
  set RE_WIM=%WIM_NAME1%
  set RE_WIM_SIZE=%WIM_SIZE_NAME1%
 )
 if /i "%WIM_NAME2%"=="Winre" (
  set TARGET_WIM=%WIM_NAME1%
  set RE_WIM=%WIM_NAME2%
  set RE_WIM_SIZE=%WIM_SIZE_NAME2%
 )
)
@echo %TARGET_WIM%
if "%TARGET_WIM%"=="" echo The windows image name not specified && goto :Error
@echo.
set /a RE_WIM_SIZE=%RE_WIM_SIZE:~0,-6%
if %RE_WIM_SIZE% LSS 430 set /a RECOVERY_SIZE=480
if %RE_WIM_SIZE% GEQ 430 (
 if %RE_WIM_SIZE% LSS 680 (
  set /a RECOVERY_SIZE=%RE_WIM_SIZE%+320
 ) else (
  set /a RECOVERY_SIZE=%RE_WIM_SIZE%+1024
 )
)
if "%SINGLE_OS%"=="1" set OS=SingleOS
@echo.
@echo *****************************************************************
@echo  Write the diskpart script now that we know what disk to use
@echo *****************************************************************
:: SingleOS
if "%OS%"=="SingleOS" (
 @echo call arSingleOS
 call arSingleOS
)
:: DualOS
if "%OS%"=="DualOS" (
 @echo call arDualOS
 call arDualOS
)
@echo Winpart.txt now contains…..
type x:\winpart.txt
@echo.
@echo *****************************************************************
@echo  Setting up the partition table
@echo *****************************************************************
@echo call diskpart /s x:\winpart.txt
diskpart /s x:\winpart.txt
if %ERRORLEVEL% NEQ 0 echo Diskpart error && goto :Error
@echo.
@echo Making directories…
md w:\recycler\scratch
if %ERRORLEVEL% NEQ 0 echo "Failed to make w:\recycler\scratch directory" && goto :error
@echo.
md r:\recovery\windowsre
if %ERRORLEVEL% NEQ 0 echo "Failed to make r:\recovery\windowsre directory" && goto :error
@echo.
@echo *****************************************************************
@echo  Applying the Windows image from the USB
@echo *****************************************************************
if "%SWM_NUM%"=="" (
 :: DeployWIM
 @echo call eployOS wim /compact /EA
 call eployOS wim /compact /EA
) else (
 :: DeploySWM
 @echo call eployOS swm /Compact /EA
 call eployOS swm /Compact /EA
)
goto :SetWinRE

:SetWinRE
@echo.
@echo *****************************************************************
@echo  Move WinRE to Recovery Partition
@echo *****************************************************************
@echo.
@echo Modifying attributes of winre.wim so we can move it.
attrib w:\Windows\System32\recovery\winre.wim -s -h -a -r
@echo if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre
if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre
if %ERRORLEVEL% NEQ 0 echo "Failed to move winre.wim to r:\recovery\windowsre" && goto :error
@echo.
@echo xcopy %InstallPath%\Winre\Winre.wim r:\recovery\windowsre /y
xcopy %InstallPath%\Winre.wim r:\recovery\windowsre /y
if %ERRORLEVEL% NEQ 0 echo "Failed to copy winre.wim to r:\recovery\windowsre" && goto :error
@echo.
@echo reset attributes now
attrib r:\recovery\windowsre\winre.wim +s +h +a +r
@echo.
@echo *****************************************************************
@echo  Setting the boot environment
@echo *****************************************************************
if "%OS%"=="SingleOS" (
 @echo call w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all
 call w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all
 if %ERRORLEVEL% NEQ 0 echo "Failed to set boot information" && goto :error
)
if "%OS%"=="DualOS" (
 @echo call w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS
 w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS
 if %ERRORLEVEL% NEQ 0 echo "Failed to set boot information" && goto :error
 @echo call ualOSQ2S
 call ualOSQ2S
)
@echo *****************************************************************
@echo  Setting the recovery environment
@echo *****************************************************************
@echo w:\windows\system32\reagentc /SetREImage /Path r:\recovery\windowsre /target w:\windows
w:\windows\system32\reagentc /SetREImage /Path r:\recovery\windowsre /target w:\windows
if %ERRORLEVEL% NEQ 0 echo "Failed to set recovery information" && goto :error
@echo.
rmdir /s /q w:\recycler
@echo.
if "%FLASH_BIOS%"=="1" goto :FLASH_BIOS
goto :END

:FLASH_BIOS
@echo.
@echo ********************************************
@echo  Flashing BIOS…
@echo ********************************************
@echo.
@echo  BIOS file FOUND at %InstallPath%\BIOS
@echo.
if EXIST %InstallPath%\BIOS\*.bin xcopy /y %InstallPath%\BIOS\*.bin %SCRIPTS_PATH%\Tools\
if EXIST %InstallPath%\BIOS\*.rom xcopy /y %InstallPath%\BIOS\*.rom %SCRIPTS_PATH%\Tools\
for /r "%SCRIPTS_PATH%\Tools" %%Z in (*.bin) do (
  ren "%%Z" "%%~na.fd"
)
for /r "%SCRIPTS_PATH%\Tools" %%Z in (*.rom) do (
  ren "%%Z" "%%~na.fd"
)
if NOT EXIST %SCRIPTS_PATH%\Tools\*.fd echo "Can not find the BIOS file" && goto :error
:: Flash BIOS
if /i "%PROCESSOR_ARCHITECTURE%"=="x86" %SCRIPTS_PATH%\Tools\H2OFFT-W.exe
if /i "%PROCESSOR_ARCHITECTURE%"=="amd64" %SCRIPTS_PATH%\Tools\H2OFFT-Wx64.exe
del /q %SCRIPTS_PATH%\Tools\*.fd
if %errorlevel% NEQ 0 echo "Failed to flash BIOS" && goto :error
goto :END

:ERROR
color 4f
@echo.
@echo An error has been detected.
@echo.
@echo Input Ctrl + C to exit
pause >nul
goto :ERROR

:SelectDisk
@echo.>x:\ListDisk.txt
@echo list disk >>x:\ListDisk.txt
@echo exit >>x:\ListDisk.txt
rem run diskpart script
diskpart /s x:\ListDisk.txt >x:\eMMCDisk.txt
for /f "skip=1 tokens=2" %%i in ('type x:\eMMCDisk.txt ^| find "Disk"') do (
 @echo select disk %%i>x:\DetailDisk.txt
 @echo detail disk >>x:\DetailDisk.txt
 @echo exit >>x:\DetailDisk.txt
 @echo diskpart /s x:\DetailDisk.txt>x:\DiskInfo.txt
 diskpart /s x:\DetailDisk.txt>x:\DiskInfo.txt
 for /f "tokens=3" %%a in ('type x:\DiskInfo.txt ^| find "Type   :"') do (
  @echo Disk type :%%a
  if "%%a"=="SD" set Disk=%%i && goto :EOF
 )
)
set Disk=
goto :EOF

arSingleOS
@echo.>x:\winpart.txt
@echo select disk %Disk%>>x:\winpart.txt
@echo clean>>x:\winpart.txt
@echo convert gpt>>x:\winpart.txt
@echo create partition efi size=100>>x:\winpart.txt
@echo format quick fs=fat32 label="System">>x:\winpart.txt
@echo assign letter="S">>x:\winpart.txt
@echo create partition msr size=128>>x:\winpart.txt
@echo create partition primary>>x:\winpart.txt
@echo format quick fs=ntfs label="Windows">>x:\winpart.txt
@echo assign letter="W">>x:\winpart.txt
@echo shrink desired=%RECOVERY_SIZE%>>x:\winpart.txt
@echo create partition primary>>x:\winpart.txt
@echo format quick fs=ntfs label="Recovery">>x:\winpart.txt
@echo assign letter="R">>x:\winpart.txt
@echo set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac">>x:\winpart.txt
@echo gpt attributes=0×8000000000000001>>x:\winpart.txt
@echo exit>>x:\WinPart.txt
goto :EOF

arDualOS
@echo.>x:\winpart.txt
@echo select disk %Disk%>>x:\winpart.txt
@echo create partition msr size=128>>x:\winpart.txt
@echo create partition primary>>x:\winpart.txt
@echo format quick fs=ntfs label="Windows">>x:\winpart.txt
@echo assign letter="W">>x:\winpart.txt
@echo shrink desired=%RECOVERY_SIZE%>>x:\winpart.txt
@echo create partition primary>>x:\winpart.txt
@echo format quick fs=ntfs label="Recovery">>x:\winpart.txt
@echo assign letter="Z">>x:\winpart.txt
@echo set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac">>x:\winpart.txt
@echo gpt attributes=0×8000000000000001>>x:\winpart.txt
@echo exit>>x:\WinPart.txt
goto :EOF

ualOSQ2S
if NOT EXIST w:\Recovery\OEM\Backup\OEM\Script.cmd echo.>w:\Recovery\OEM\Backup\OEM\Script.cmd
if NOT EXIST w:\Windows\OEM\Script.cmd echo.>w:\Windows\OEM\Script.cmd
echo if /i "%%PROCESSOR_ARCHITECTURE%%"=="x86" cmd.exe /c msiexec /passive /norestart /i %%WINDIR%%\OEM\InsydeQ2S_x86.msi >>w:\Windows\OEM\Script.cmd
echo if /i "%%PROCESSOR_ARCHITECTURE%%"=="x86" cmd.exe /c msiexec /passive /norestart /i %%WINDIR%%\OEM\InsydeQ2S_x86.msi >>w:\Recovery\OEM\Backup\OEM\Script.cmd
echo if /i "%%PROCESSOR_ARCHITECTURE%%"=="AMD64" cmd.exe /c msiexec /passive /norestart /i %%WINDIR%%\OEM\InsydeQ2S_x64.msi >>w:\Windows\OEM\Script.cmd
echo if /i "%%PROCESSOR_ARCHITECTURE%%"=="AMD64" cmd.exe /c msiexec /passive /norestart /i %%WINDIR%%\OEM\InsydeQ2S_x64.msi >>w:\Recovery\OEM\Backup\OEM\Script.cmd
echo REG ADD "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation" /v "RealTimeIsUniversal" /t REG_DWORD /d 1 /f >>w:\Windows\OEM\Script.cmd
echo REG ADD "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation" /v "RealTimeIsUniversal" /t REG_DWORD /d 1 /f >>w:\Recovery\OEM\Backup\OEM\Script.cmd
if /i "%PROCESSOR_ARCHITECTURE%"=="x86" xcopy /y /e %SCRIPTS_PATH%\Tools\DualOS\InsydeQ2S_x86.msi w:\Recovery\OEM\Backup\OEM\
if /i "%PROCESSOR_ARCHITECTURE%"=="x86" xcopy /y /e %SCRIPTS_PATH%\Tools\DualOS\InsydeQ2S_x86.msi w:\Windows\OEM\
if /i "%PROCESSOR_ARCHITECTURE%"=="amd64" xcopy /y /e %SCRIPTS_PATH%\Tools\DualOS\InsydeQ2S_x64.msi w:\Recovery\OEM\Backup\OEM\
if /i "%PROCESSOR_ARCHITECTURE%"=="amd64" xcopy /y /e %SCRIPTS_PATH%\Tools\DualOS\InsydeQ2S_x64.msi w:\Windows\OEM\
goto :EOF

eployOS
rem Extension Name
set EN=%1
rem Compact Switch
set CS=%2
rem EA Switch
set ES=%3
if /i "%EN%"=="swm" (
 @echo call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%.swm" /SWMFile:"%InstallPath%\%TARGET_WIM%*.swm" /index:1 /applydir:w:\ /scratchdir:"w:\recycler\SCRATCH" %CS% %ES%
 call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%.swm" /SWMFile:"%InstallPath%\%TARGET_WIM%*.swm" /index:1 /applydir:w:\ /scratchdir:"w:\recycler\SCRATCH" %CS% %ES%
 if %errorlevel% NEQ 0 echo "Failed to deploy OS" && goto :error
) else (
 @echo call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%.wim" /index:1 /applydir:w:\ /scratchdir:"w:\recycler\SCRATCH" %CS% %ES%
 call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%.wim" /index:1 /applydir:w:\ /scratchdir:"w:\recycler\SCRATCH" %CS% %ES%
 if %errorlevel% NEQ 0 echo "Failed to deploy OS" && goto :error
)
goto :EOF

:END
@echo.
@echo *****************************************************************
@echo  Copy over Test tools to \TEST_TOOL
@echo  \TEST_TOOL  SHOULD BE DELETED PRIOR TO SHIPPING
@echo *****************************************************************
@echo %SCRIPTS_PATH%\7za.exe x w:\TEST_TOOL.zip -oW:\
if EXIST %WinpeSource%TEST_TOOL.zip (
 if /i "%PROCESSOR_ARCHITECTURE%"=="x86" %SCRIPTS_PATH%\7za.exe x  %WinpeSource%TEST_TOOL.zip -oW:\
 if /i "%PROCESSOR_ARCHITECTURE%"=="amd64" %SCRIPTS_PATH%\7za_x64.exe x  %WinpeSource%TEST_TOOL.zip -oW:\
)
@echo.
@echo *****************************************************************
@echo  Copying over Unattend.xml to use on factory floor if it exists
@echo *****************************************************************
@echo if EXIST %InstallPath%\Unattend.xml copy %InstallPath%\Unattend.xml w:\Windows\Panther /y
if EXIST %InstallPath%\Unattend.xml copy %InstallPath%\Unattend.xml w:\Windows\Panther /y
@echo *****************************************************************
@echo  Copying over Unattend.xml to use on factory floor if it exists
@echo *****************************************************************
@echo if EXIST %InstallPath%\LayoutModification.xml copy %InstallPath%\LayoutModification.xml w:\Users\Default\AppData\Local\Microsoft\Windows\Shell\ /y
if EXIST %InstallPath%\LayoutModification.xml copy %InstallPath%\LayoutModification.xml w:\Users\Default\AppData\Local\Microsoft\Windows\Shell\ /y
if EXIST %InstallPath%\DefaultLayouts.xml copy %InstallPath%\DefaultLayouts.xml w:\Users\Default\AppData\Local\Microsoft\Windows\Shell\ /y
@echo.
@echo *****************************************************************
@echo  Copying over NON Scanstate Packages, if they exist.
@echo  IF YOU COPY OVER SCANSTATE PPKG, THIS CAUSE IMAGE TO FAIL DURING RECOVERY
@echo *****************************************************************
@echo.
@echo if EXIST %InstallPath%\*.ppkg copy %InstallPath%\*.ppkg w:\Recovery\Customizations /y
if EXIST %InstallPath%\*.ppkg copy %InstallPath%\*.ppkg w:\Recovery\Customizations /y
@echo Apply PPKG
set PPKG_PATH=w:\Recovery\Customizations
if "%PPKG_FILE%"=="0" del /s /q %PPKG_PATH%\usmt.ppkg
if "%SINGLE_INSTANCE%"=="1" (
 @echo if EXIST w:\Recovery\Customizations\usmt.ppkg DISM /Apply-CustomDataImage /CustomDataImage:w:\Recovery\Customizations\usmt.ppkg /ImagePath:w:\ /SingleInstance
 if EXIST w:\Recovery\Customizations\usmt.ppkg DISM /Apply-CustomDataImage /CustomDataImage:w:\Recovery\Customizations\usmt.ppkg /ImagePath:w:\ /SingleInstance
)
@echo.
@echo Apply… SPP
@echo if EXIST %InstallPath%\*.spp copy %InstallPath%\*.spp w:\Recovery\Customizations /y
if EXIST %InstallPath%\*.spp copy %InstallPath%\*.spp w:\Recovery\Customizations /y
set SPP_PATH=w:\Recovery\Customizations
if "%SPP_FILE%"=="1" (
 setlocal enabledelayedexpansion
 cd /d %SPP_PATH%
 set num=""
 for /f "delims=" %%i in ('dir /a-d /b *.spp') do (
  set /a num+=1
  if "!num!" == "!num!" (
   @echo set PackagePath!num!=%%~ni
   set PackagePath!num!=%%~ni
  )
 ) 
)
@echo Apply-SiloedPackage / Only support 4 SPP
if %num%==1 DISM.exe /ImagePath:w:\ /Apply-SiloedPackage /PackagePath:%SPP_FILE%\%PackagePath1%.spp
if %num%==2 DISM.exe /ImagePath:w:\ /Apply-SiloedPackage /PackagePath:%SPP_FILE%\%PackagePath1%.spp /PackagePath:%SPP_FILE%\%PackagePath2%.spp
if %num%==3 DISM.exe /ImagePath:w:\ /Apply-SiloedPackage /PackagePath:%SPP_FILE%\%PackagePath1%.spp /PackagePath:%SPP_FILE%\%PackagePath2%.spp /PackagePath:%SPP_FILE%\%PackagePath3%.spp
if %num%==4 DISM.exe /ImagePath:w:\ /Apply-SiloedPackage /PackagePath:%SPP_FILE%\%PackagePath1%.spp /PackagePath:%SPP_FILE%\%PackagePath2%.spp /PackagePath:%SPP_FILE%\%PackagePath3%.spp /PackagePath:%SPP_FILE%\%PackagePath4%.spp
@echo.
@echo *****************************************************************
@echo  Copy over OEM
@echo *****************************************************************
xcopy %WinpeSource%OEM w:\recovery\oem\ /s /y
rem
rem  Get finish time so we can evaluate total WinPE phase time.
rem
call |time>x:\StopTime.txt
rem
rem  Now parse both files to display the Start and Finish Time
rem
@echo === Continue the reboot.===
@echo
@echo ********************
popd
pause
call |time>x:\StopTime.txt
cd /d w:\windows\system32
call shutdown.exe -r -t 5
@echo.
for /f "tokens=5" %%A in (x:\starttime.txt) do echo Script Start Time is %%A
for /f "tokens=5" %%A in (x:\stoptime.txt) do echo  Script Stop Time is %%A
@echo.
@echo *****************************************************************
@echo  Image deployment COMPLETE. Type EXIT from Command
@echo  Prompt to restart or turn off device.
@echo *****************************************************************