@echo off

　

:: Version=11.0.1.3

:: Date=2015-08-13

::

:: For WIndows 10

:: Add Flash BIOS / Single OS and Dual OS

:: Remove flash FFU

:: Add Winre.wim

:: Add TEST_TOOL

:: Add Recovery

:: Recovery

:: Flash BIOS single os

:: Remove Recovery

　

@rem This script is called by x:\Windows\System32\Startnet.cmd – WinPE

@echo.

@echo.

@rem *******************************************************************

@rem FLASH_BIOS=1 Auto flash BIOS / FLASH_BIOS=0 Do not auto flash BIOS

@rem *******************************************************************

@echo.

@echo.

　

set FLASH_BIOS=1

　

@echo.

@echo Running Intel Optimization powercfg for improved imaging times

@echo.

@echo call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c

call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c

@echo.

@echo.

@echo.

@rem *****************************************************************

@rem List all the disks, then search the volumes of each one to see

@rem which disks may have "Winpe" in the label. We will ignore that

@rem disk and use the first disk without the Winpe label that we find.

@rem *****************************************************************

@echo.>x:\listdisk.txt

@echo list disk>>x:\listdisk.txt

@echo exit>>x:\listdisk.txt

echo x:\listdisk.txt

@echo call diskpart /s x:\listdisk.txt

call diskpart /s x:\listdisk.txt>x:\Disks.txt

@echo.

@rem Set Disk equal to blank to start

set disk=

@echo.

@rem

@rem This line will write a diskpart script to select the disk and detail it's contents.

@rem We use this output to find a disk that does NOT have Winpe as the volume label.

@rem That disk will have the OS installed to it. This way you can exclude USB from diskpart.

@rem

@rem This works around the issue where the USB key is sometimes enumerated as disk 0 and the

@rem SSD is disk 1.

@rem

for /f "skip=8 tokens=2" %%A in (x:\Disks.txt) do (

@echo sel disk %%A>x:\Par.txt

@echo det disk>>x:\Par.txt

@echo exit>>x:\Par.txt

if NOT "%%A"=="DiskPart…" call :ListPar %%A

)

if "%Disk%"=="" echo No disk found without a volume label of "Winpe"&& set disk=0

@echo Using Disk "%Disk%"

@echo.

@echo.

@echo *****************************************************************

@echo Checkup SingleOS or DualOS or whether exist windows partiton

@echo *****************************************************************

@rem create diskpart script for search windows partitions from emmc disk

@echo.>x:\ListPar.txt

@echo select disk "%Disk%" >>x:\ListPar.txt

@echo list partition >>x:\ListPar.txt

@echo exit >>x:\ListPar.txt

@echo.

@rem run diskpart script

diskpart /s x:\ListPar.txt >x:\eMMCPar.txt

@echo.

@rem SingleOS / DualOS switch

find "Partition 10" x:\eMMCPar.txt >nul

if %ERRORLEVEL% NEQ 0 Goto :SingleOS

@rem ensure it's DualOS,and check whether exist windows partition,if not:create the new windows partition

find "Partition 16" x:\eMMCPar.txt >nul

if %ERRORLEVEL% NEQ 0 Goto : DualOS

@echo. Delete windows partition…

@echo.

@rem create diskpart script, the partitions which will be deleted

@echo. >x:\WinPar.txt

@echo select disk "%Disk%">>x:\WinPar.txt

for /f "skip=24 tokens=2" %%i in ('type x:\eMMCPar.txt ^| find /v "DiskPart"') do (

@echo select Partition %%i>>x:\WinPar.txt

@echo delete Partition override>>x:\WinPar.txt

)

@echo exit>>x:\WinPar.txt

type x:\WinPar.txt

@echo.

@echo diskpart /s x:\WinPar.txt

diskpart /s x:\WinPar.txt

Goto : DualOS

　

:SingleOS

@echo.

@echo *****************************************************************

@echo Write the diskpart script now that we know what disk to use

@echo *****************************************************************

@echo.>x:\winpart.txt

@echo select disk "%Disk%">>x:\winpart.txt

@echo clean>>x:\winpart.txt

@echo convert gpt>>x:\winpart.txt

@echo create partition efi size=100>>x:\winpart.txt

@echo format quick fs=fat32 label="System">>x:\winpart.txt

@echo assign letter="S">>x:\winpart.txt

@echo create partition msr size=128>>x:\winpart.txt

@echo create partition primary>>x:\winpart.txt

@echo format quick fs=ntfs label="Windows">>x:\winpart.txt

@echo assign letter="W">>x:\winpart.txt

@echo shrink desired=450>>x:\winpart.txt

@echo create partition primary>>x:\winpart.txt

@echo format quick fs=ntfs label="Recovery">>x:\winpart.txt

@echo assign letter="R">>x:\winpart.txt

@echo set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac">>x:\winpart.txt

@echo gpt attributes=0×8000000000000001>>x:\winpart.txt

@echo exit>>x:\WinPart.txt

　

@echo Winpart.txt now contains…..

@echo.

type x:\winpart.txt

@echo.

@echo.

@echo *****************************************************************

@echo Setting up the partition table

@echo *****************************************************************

@echo call diskpart /s x:\winpart.txt

diskpart /s x:\winpart.txt

@echo.

@echo.

@echo *****************************************************************

@rem Map drive letter for Install.wim

@echo *****************************************************************

@echo.>x:\ListVol.txt

@echo List volume>>x:\ListVol.txt

@echo exit>>x:\ListVol.txt

@echo call diskpart /s x:\ListVol.txt

call diskpart /s x:\ListVol.txt>x:\Output.txt

@echo.

@echo.

@rem Go through each drive letter, looking for the images\Install.txt file

for /f "skip=8 tokens=3" %%A in (x:\Output.txt) do (

if exist %%A:\images\install.txt set InstallPath=%%A:\images&& echo "Found device with images folder and install.txt file"

if exist %%A:\images\ set InstallPath=%%A:\images&& echo "Found device with images folder"

)

@echo.

@echo.

@rem Check InstallPath was found and there are images in it.

@echo.

@echo *****************************************************************

@rem Select WIM

@echo *****************************************************************

@echo.

setlocal enabledelayedexpansion

cd /d %InstallPath%

set num=""

for /f "delims=" %%i in ('dir /a-d /b *.wim') do (

set /a num+=1

if "!num!" == "!num!" set WIM_NAME!num!=%%i

)

if NOT "%WIM_NAME3%"=="" echo Can not select *.WIM && goto :Error

set TARGET_WIM=%WIM_NAME1%

if /i "%TARGET_WIM%"=="Winre.wim" (

set TARGET_WIM=%WIM_NAME2%

)

@echo %TARGET_WIM%

if "%TARGET_WIM%"=="" echo The windows image name not specified && goto :Error

if NOT EXIST %InstallPath%\%TARGET_WIM% echo "Install.wim NOT found." && goto :Error

@echo Install.wim FOUND at %InstallPath%\images\install.wim

@echo.

@echo.

@echo Making directories…

md w:\recycler\scratch

if %errorlevel% NEQ 0 echo "Failed to make w:\recycler\scratch directory" && goto :error

@echo.

md r:\recovery\windowsre

if %errorlevel% NEQ 0 echo "Failed to make m:\recovery\windowsre directory" && goto :error

@echo.

@echo *****************************************************************

@echo Applying the Windows image from the USB

@echo *****************************************************************

@echo call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%" /index:1 /applydir:w:\ /compact /scratchdir:"w:\recycler\SCRATCH

call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%" /index:1 /applydir:w:\ /compact /scratchdir:"w:\recycler\SCRATCH

if %errorlevel% NEQ 0 echo "Failed to apply image to w:" && goto :error

@echo.

@echo.

@echo.

@echo *****************************************************************

@rem Move WinRE to Recovery Partition

@echo *****************************************************************

@echo.

@echo Modifying attributes of winre.wim so we can move it.

attrib w:\Windows\System32\recovery\winre.wim -s -h -a -r

@echo if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre

if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre

if %errorlevel% NEQ 0 echo "Failed to move winre.wim to r:\recovery\windowsre" && goto :error

@echo.

@echo xcopy %InstallPath%\Winre\Winre.wim r:\recovery\windowsre /y

xcopy %InstallPath%\Winre.wim r:\recovery\windowsre /y

if %errorlevel% NEQ 0 echo "Failed to copy winre.wim to r:\recovery\windowsre" && goto :error

@echo.

@echo.

@echo reset attributes now

attrib r:\Recovery\Windowsre\winre.wim +s +h +a +r

@echo.

@echo.

@echo *****************************************************************

@echo Setting the boot environment

@echo *****************************************************************

@echo call w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all

w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all

if %errorlevel% NEQ 0 echo "Failed to set boot information" && goto :error

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Setting the recovery environment

@echo *****************************************************************

@echo w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows

w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows

if %errorlevel% NEQ 0 echo "Failed to set recovery information" && goto :error

@echo.

rmdir /s /q w:\recycler

@echo.

if "%FLASH_BIOS%"=="1" GOTO :FLASH_BIOS

goto :END

　

: DualOS

@echo.

@echo *****************************************************************

@echo Write the diskpart script now that we know what disk to use

@echo *****************************************************************

@echo.>x:\winpart.txt

@echo select disk "%Disk%">>x:\winpart.txt

rem @echo clean>>x:\winpart.txt

rem @echo convert gpt>>x:\winpart.txt

@echo select volume 0 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 1 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 2 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volum 3 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 4 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 5 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 6 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 7 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 8 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 9 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 10 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 11 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 12 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

@echo select volume 13 >>x:\winpart.txt

@echo attributes volume set hidden >>x:\winpart.txt

rem @echo create partition efi size=100>>x:\winpart.txt

rem @echo format quick fs=fat32 label="System">>x:\winpart.txt

rem @echo assign letter="S">>x:\winpart.txt

@echo create partition msr size=128>>x:\winpart.txt

@echo create partition primary>>x:\winpart.txt

@echo format quick fs=ntfs label="Windows">>x:\winpart.txt

@echo assign letter="W">>x:\winpart.txt

@echo shrink desired=450>>x:\winpart.txt

@echo create partition primary>>x:\winpart.txt

@echo format quick fs=ntfs label="Recovery">>x:\winpart.txt

@echo assign letter="R">>x:\winpart.txt

@echo set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac">>x:\winpart.txt

@echo gpt attributes=0×8000000000000001>>x:\winpart.txt

@echo exit>>x:\WinPart.txt

@echo Winpart.txt now contains…..

@echo.

type x:\winpart.txt

@echo.

@echo.

@echo *****************************************************************

@echo Setting up the partition table

@echo *****************************************************************

@echo call diskpart /s x:\winpart.txt

diskpart /s x:\winpart.txt

@echo.

@echo.

@echo *****************************************************************

@rem Map drive letter for Install.wim

@echo *****************************************************************

@echo.>x:\ListVol.txt

@echo List volume>>x:\ListVol.txt

@echo exit>>x:\ListVol.txt

@echo call diskpart /s x:\ListVol.txt

call diskpart /s x:\ListVol.txt>x:\Output.txt

@echo.

@echo.

@rem Go through each drive letter, looking for the images\Install.txt file

for /f "skip=8 tokens=3" %%A in (x:\Output.txt) do (

if exist %%A:\images\install.txt set InstallPath=%%A:\images&& echo "Found device with images folder and install.txt file"

if exist %%A:\images\ set InstallPath=%%A:\images&& echo "Found device with images folder"

)

@echo.

@echo.

@rem Check InstallPath was found and there are images in it.

@echo.

@echo *****************************************************************

@rem Select WIM

@echo *****************************************************************

@echo.

setlocal enabledelayedexpansion

cd /d %InstallPath%

set num=""

for /f "delims=" %%i in ('dir /a-d /b *.wim') do (

set /a num+=1

if "!num!" == "!num!" set WIM_NAME!num!=%%i

)

if NOT "%WIM_NAME3%"=="" echo Can not specified *.WIM && goto :Error

set TARGET_WIM=%WIM_NAME1%

if /i "%TARGET_WIM%"=="Winre.wim" (

set TARGET_WIM=%WIM_NAME2%

)

@echo %TARGET_WIM%

if "%TARGET_WIM%"=="" echo The windows image name not specified && goto :Error

if NOT EXIST %InstallPath%\%TARGET_WIM% echo "Install.wim NOT found." && goto :Error

@echo Install.wim FOUND at %InstallPath%\images\install.wim

@echo.

@echo.

@echo Making directories…

md w:\recycler\scratch

if %errorlevel% NEQ 0 echo "Failed to make w:\recycler\scratch directory" && goto :error

@echo.

md r:\recovery\windowsre

if %errorlevel% NEQ 0 echo "Failed to make m:\recovery\windowsre directory" && goto :error

@echo.

@echo *****************************************************************

@echo Applying the Windows image from the USB

@echo *****************************************************************

@echo call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%" /index:1 /applydir:w:\ /compact /scratchdir:"w:\recycler\SCRATCH

call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%" /index:1 /applydir:w:\ /compact /scratchdir:"w:\recycler\SCRATCH

if %errorlevel% NEQ 0 echo "Failed to apply image to w:" && goto :error

@echo.

@echo.

@echo.

@echo *****************************************************************

@rem Move WinRE to Recovery Partition

@echo *****************************************************************

@echo.

@echo Modifying attributes of winre.wim so we can move it.

attrib w:\Windows\System32\recovery\winre.wim -s -h -a -r

@echo if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre

if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre

if %errorlevel% NEQ 0 echo "Failed to move winre.wim to r:\recovery\windowsre" && goto :error

@echo.

@echo xcopy %InstallPath%\Winre\Winre.wim r:\recovery\windowsre /y

xcopy %InstallPath%\Winre.wim r:\recovery\windowsre /y

if %errorlevel% NEQ 0 echo "Failed to copy winre.wim to r:\recovery\windowsre" && goto :error

@echo reset attributes now

attrib r:\Recovery\Windowsre\winre.wim +s +h +a +r

@echo.

@echo.

@echo *****************************************************************

@echo Setting the boot environment

@echo *****************************************************************

@echo call w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all

@rem w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all

w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS

if %errorlevel% NEQ 0 echo "Failed to set boot information" && goto :error

@echo.

@echo *****************************************************************

@echo Setting the recovery environment

@echo *****************************************************************

@echo w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows

w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows

if %errorlevel% NEQ 0 echo "Failed to set recovery information" && goto :error

@echo.

rmdir /s /q w:\recycler

@echo.

%WinPESource%Scripts\Tools\H2OUVE-W-Q2S.exe

IF EXIST w:\"Program Files"\H2OUVE-W.exe DEL /q w:\"Program Files"\H2OUVE-W.exe

IF EXIST w:\"Program Files"\RunQ2S.bat DEL /q w:\"Program Files"\RunQ2S.bat

IF EXIST w:\"Program Files"\VarDate.xml DEL /q w:\"Program Files"\VarDate.xml

IF EXIST w:\"Program Files"\VarEdit.txt DEL /q w:\"Program Files"\VarEdit.txt

IF EXIST %WinPESource%I-NET_x86.msi DEL /q w:\Windows\OEM\I-NET_x86.msi

IF EXIST %WinPESource%I-NET_x86.msi COPY /y %WinPESource%I-NET_x86.msi w:\Windows\OEM

if "%FLASH_BIOS%"=="1" GOTO :FLASH_BIOS

Goto :END

　

:FLASH_BIOS

@echo.

@echo *****************************************************************

@echo Flash BIOS

@echo *****************************************************************

@echo.

@echo BIOS file FOUND at %InstallPath%\BIOS\*.ROM

@echo.

xcopy /y %InstallPath%\BIOS\*.ROM %WinPESource%Scripts\Tools\

for /r "%WinPESource%Scripts\Tools" %%Z in (*.ROM) do (

ren "%%Z" "%%~na.fd"

)

if NOT EXIST %WinPESource%Scripts\Tools\*.fd echo "Can not find the BIOS file" && goto :error

@REM Flash BIOS

%WinPESource%Scripts\Tools\H2OFFT-W.exe

Del /q %WinPESource%Scripts\Tools\*.fd

if %errorlevel% NEQ 0 echo "Failed to flash BIOS" && goto :error

@echo *****************************************************************

@echo Image deployment COMPLETE. Type EXIT from Command

@echo Prompt to restart or turn off device.

@echo *****************************************************************

goto :END

　

:ERROR

color 4f

@echo.

@echo An error has been detected.

@echo.

pause >nul

goto :ERROR

　

:ListPar

@REM This section is to bring a disk number and use it to List Partitions

@echo.

set TempDisk=%1

diskpart /s x:\Par.txt>x:\ParOutput.txt

for /f "skip=26 tokens=4" %%A in (x:\ParOutput.txt) do (

if /i NOT "%%A"=="Winpe" set Disk=%TempDisk%

)

Goto :EOF

　

:END

@echo.

@echo *****************************************************************

@echo Copy over Test tools to \TEST_TOOL

@echo \TEST_TOOL SHOULD BE DELETED PRIOR TO SHIPPING

@echo *****************************************************************

@echo %WinpeSource%Scripts\7za.exe x w:\TEST_TOOL.zip -oW:\

if EXIST %WinpeSource%TEST_TOOL.zip %WinpeSource%Scripts\7za.exe x %WinpeSource%TEST_TOOL.zip -oW:\

@echo.

@echo *****************************************************************

@echo Copying over Unattend.xml to use on factory floor if it exists

@echo *****************************************************************

@echo if EXIST %InstallPath%\Unattend.xml copy %InstallPath%\Unattend.xml w:\Windows\Panther /y

if EXIST %InstallPath%\Unattend.xml copy %InstallPath%\Unattend.xml w:\Windows\Panther /y

@echo.

@echo *****************************************************************

@echo Copying over NON Scanstate Packages, if they exist.

@echo IF YOU COPY OVER SCANSTATE PPKG, THIS CAUSE IMAGE TO FAIL DURING RECOVERY

@echo *****************************************************************

@echo.

@echo if EXIST %InstallPath%\*.ppkg copy %InstallPath%\*.ppkg w:\Recovery\Customizations /y

if EXIST %InstallPath%\*.ppkg copy %InstallPath%\*.ppkg w:\Recovery\Customizations /y

@echo Apply PPKG

setlocal enabledelayedexpansion

set PPKG_PATH=w:\Recovery\Customizations

cd /d %PPKG_PATH%

set num=""

for /f "delims=" %%i in ('dir /a-d /b *.ppkg') do (

set /a num+=1

if "!num!" == "!num!" (

@echo if /i "%%~ni"=="usmt" DISM /Apply-CustomDataImage /CustomDataImage:!PPKG_PATH!\%%~ni.ppkg /ImagePath:w:\ /SingleInstance

if /i "%%~ni"=="usmt" DISM /Apply-CustomDataImage /CustomDataImage:!PPKG_PATH!\%%~ni.ppkg /ImagePath:w:\ /SingleInstance

@echo if /i NOT "%%~ni"=="usmt" DISM.exe /Image:w:\ /Add-ProvisioningPackage /PackagePath:!PPKG_PATH!\%%~ni.ppkg

if /i NOT "%%~ni"=="usmt" DISM.exe /Image:w:\ /Add-ProvisioningPackage /PackagePath:!PPKG_PATH!\%%~ni.ppkg

)

)

@echo.

@echo *****************************************************************

@echo Image deployment COMPLETE. Type EXIT from Command

@echo Prompt to restart or turn off device.

@echo *****************************************************************

@rem

@rem Get finish time so we can evaluate total WinPE phase time.

@rem

call |time>x:\StopTime.txt

@rem

@rem Now parse both files to display the Start and Finish Time

@rem

@echo.

@echo.

for /f "tokens=5" %%A in (x:\starttime.txt) do echo Script Start Time is %%A

for /f "tokens=5" %%A in (x:\stoptime.txt) do echo Script Stop Time is %%A

@echo.

exit