@echo off

:: Version=11.0.1.2
:: Date=2015-08-12
::
:: For WIndows 10
:: Add Flash BIOS / Single OS and Dual OS
:: Remove flash FFU
:: Add Winre.wim
:: Add TEST_TOOL
:: Add Recovery
:: Recovery
:: Flash BIOS single os
@rem  This script is called by x:\Windows\System32\Startnet.cmd – WinPE
@echo.
@echo.
@rem  *******************************************************************
@rem  FLASH_BIOS=1 Auto flash BIOS / FLASH_BIOS=0 Do not auto flash BIOS
@rem  *******************************************************************
@echo.
@echo.

set FLASH_BIOS=0

@echo.
@echo Running Intel Optimization powercfg for improved imaging times
@echo.
@echo call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
@echo.
@echo.
@echo.
@rem  *****************************************************************
@rem  List all the disks, then search the volumes of each one to see
@rem  which disks may have "Winpe" in the label. We will ignore that
@rem  disk and use the first disk without the Winpe label that we find.
@rem  *****************************************************************
@echo.>x:\listdisk.txt
@echo list disk>>x:\listdisk.txt
@echo exit>>x:\listdisk.txt
echo x:\listdisk.txt
@echo call diskpart /s x:\listdisk.txt
call diskpart /s x:\listdisk.txt>x:\Disks.txt
@echo.
@rem Set Disk equal to blank to start
set disk=
@echo.
@rem
@rem  This line will write a diskpart script to select the disk and detail it's contents.
@rem  We use this output to find a disk that does NOT have Winpe as the volume label.
@rem  That disk will have the OS installed to it. This way you can exclude USB from diskpart.
@rem  
@rem  This works around the issue where the USB key is sometimes enumerated as disk 0 and the
@rem  SSD is disk 1.
@rem  
for /f "skip=8 tokens=2" %%A in (x:\Disks.txt) do (
@echo sel disk %%A>x:\Par.txt
@echo det disk>>x:\Par.txt
@echo exit>>x:\Par.txt
if NOT "%%A"=="DiskPart…" call :ListPar %%A
)
if "%Disk%"=="" echo No disk found without a volume label of "Winpe"&& set disk=0
@echo Using Disk "%Disk%"
@echo.
@echo.
@echo *****************************************************************
@echo  Checkup SingleOS or DualOS or whether exist windows partiton
@echo *****************************************************************
@rem create diskpart script for search windows partitions from emmc disk
@echo.>x:\ListPar.txt
@echo select disk "%Disk%" >>x:\ListPar.txt
@echo list partition >>x:\ListPar.txt
@echo exit >>x:\ListPar.txt
@echo.
@rem run diskpart script
diskpart /s x:\ListPar.txt >x:\eMMCPar.txt
@echo.
@rem SingleOS / DualOS switch
find "Partition 10" x:\eMMCPar.txt >nul
if %ERRORLEVEL% NEQ 0 Goto :SingleOS
@rem ensure it's DualOS,and check whether exist windows partition,if not:create the new windows partition
find "Partition 16" x:\eMMCPar.txt >nul
if %ERRORLEVEL% NEQ 0 Goto ualOS
@echo. Delete windows partition…
@echo.
@rem create diskpart script, the partitions which will be deleted
@echo. >x:\WinPar.txt
@echo select disk "%Disk%">>x:\WinPar.txt
for /f "skip=24 tokens=2" %%i in ('type x:\eMMCPar.txt ^| find /v "DiskPart"') do (
@echo select Partition %%i>>x:\WinPar.txt
@echo delete Partition override>>x:\WinPar.txt
)
@echo exit>>x:\WinPar.txt
type x:\WinPar.txt
@echo.
@echo diskpart /s x:\WinPar.txt
diskpart /s x:\WinPar.txt
Goto ualOS

:SingleOS
@echo.
@echo *****************************************************************
@echo  Write the diskpart script now that we know what disk to use
@echo *****************************************************************
@echo.>x:\winpart.txt
@echo select disk "%Disk%">>x:\winpart.txt
@echo clean>>x:\winpart.txt
@echo convert gpt>>x:\winpart.txt
@echo create partition efi size=100>>x:\winpart.txt
@echo format quick fs=fat32 label="System">>x:\winpart.txt
@echo assign letter="S">>x:\winpart.txt
@echo create partition msr size=128>>x:\winpart.txt
@echo create partition primary>>x:\winpart.txt
@echo format quick fs=ntfs label="Windows">>x:\winpart.txt
@echo assign letter="W">>x:\winpart.txt
@echo shrink desired=450>>x:\winpart.txt
@echo create partition primary>>x:\winpart.txt
@echo format quick fs=ntfs label="Recovery">>x:\winpart.txt
@echo assign letter="R">>x:\winpart.txt
@echo set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac">>x:\winpart.txt
@echo gpt attributes=0×8000000000000001>>x:\winpart.txt
@echo exit>>x:\WinPart.txt

@echo Winpart.txt now contains…..
@echo.
type x:\winpart.txt
@echo.
@echo.
@echo *****************************************************************
@echo  Setting up the partition table
@echo *****************************************************************
@echo call diskpart /s x:\winpart.txt
diskpart /s x:\winpart.txt
@echo.
@echo.
@echo *****************************************************************
@rem  Map drive letter for Install.wim
@echo *****************************************************************
@echo.>x:\ListVol.txt
@echo List volume>>x:\ListVol.txt
@echo exit>>x:\ListVol.txt
@echo call diskpart /s x:\ListVol.txt
call diskpart /s x:\ListVol.txt>x:\Output.txt
@echo.
@echo.
@rem Go through each drive letter, looking for the images\Install.txt file
for /f "skip=8 tokens=3" %%A in (x:\Output.txt) do (
if exist %%A:\images\install.txt set InstallPath=%%A:\images&& echo "Found device with images folder and install.txt file"
if exist %%A:\images\ set InstallPath=%%A:\images&& echo "Found device with images folder"
)
@echo.
@echo.
@rem Check InstallPath was found and there are images in it.
@echo.
@echo *****************************************************************
@rem  Select WIM
@echo *****************************************************************
@echo.
setlocal enabledelayedexpansion
cd /d %InstallPath%
set num=""
for /f "delims=" %%i in ('dir /a-d /b *.wim') do (
    set /a num+=1
    if "!num!" == "!num!" set WIM_NAME!num!=%%i
)
if NOT "%WIM_NAME3%"=="" echo Can not select *.WIM && goto :Error
set TARGET_WIM=%WIM_NAME1%
    if /i "%TARGET_WIM%"=="Winre.wim" (
    set TARGET_WIM=%WIM_NAME2%
)
@echo %TARGET_WIM%
if "%TARGET_WIM%"=="" echo The windows image name not specified && goto :Error
if NOT EXIST %InstallPath%\%TARGET_WIM% echo "Install.wim NOT found." && goto :Error
@echo Install.wim FOUND at %InstallPath%\images\install.wim
@echo.
@echo.
@echo Making directories…
md w:\recycler\scratch
if %errorlevel% NEQ 0 echo "Failed to make w:\recycler\scratch directory" && goto :error
@echo.
md r:\recovery\windowsre
if %errorlevel% NEQ 0 echo "Failed to make m:\recovery\windowsre directory" && goto :error
@echo.
@echo *****************************************************************
@echo  Applying the Windows image from the USB
@echo *****************************************************************
@echo call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%" /index:1 /applydir:w:\ /compact /scratchdir:"w:\recycler\SCRATCH
call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%" /index:1 /applydir:w:\ /compact /scratchdir:"w:\recycler\SCRATCH
if %errorlevel% NEQ 0 echo "Failed to apply image to w:" && goto :error
@echo.
@echo.
@echo.
@echo *****************************************************************
@rem  Move WinRE to Recovery Partition
@echo *****************************************************************
@echo.
@echo Modifying attributes of winre.wim so we can move it.
attrib w:\Windows\System32\recovery\winre.wim -s -h -a -r
@echo if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre
if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre
if %errorlevel% NEQ 0 echo "Failed to move winre.wim to r:\recovery\windowsre" && goto :error
@echo.
@echo xcopy %InstallPath%\Winre\Winre.wim r:\recovery\windowsre /y
xcopy %InstallPath%\Winre.wim r:\recovery\windowsre /y
if %errorlevel% NEQ 0 echo "Failed to copy winre.wim to r:\recovery\windowsre" && goto :error
@echo.
@echo.
@echo reset attributes now
attrib r:\Recovery\Windowsre\winre.wim +s +h +a +r
@echo.
@echo.
@echo *****************************************************************
@echo  Setting the boot environment
@echo *****************************************************************
@echo call w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all
w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all
if %errorlevel% NEQ 0 echo "Failed to set boot information" && goto :error
@echo.
@echo.
@echo.
@echo *****************************************************************
@echo  Setting the recovery environment
@echo *****************************************************************
@echo w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows
w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows
if %errorlevel% NEQ 0 echo "Failed to set recovery information" && goto :error
@echo.
rmdir /s /q w:\recycler
@echo.
if "%FLASH_BIOS%"=="1" GOTO :FLASH_BIOS
goto :END

ualOS
@echo.
@echo *****************************************************************
@echo  Write the diskpart script now that we know what disk to use
@echo *****************************************************************
@echo.>x:\winpart.txt
@echo select disk "%Disk%">>x:\winpart.txt
rem @echo clean>>x:\winpart.txt
rem @echo convert gpt>>x:\winpart.txt
@echo select volume 0 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 1 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 2 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volum 3 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 4 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 5 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 6 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 7 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 8 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 9 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 10 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 11 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 12 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
@echo select volume 13 >>x:\winpart.txt
@echo attributes volume set hidden >>x:\winpart.txt
rem @echo create partition efi size=100>>x:\winpart.txt
rem @echo format quick fs=fat32 label="System">>x:\winpart.txt
rem @echo assign letter="S">>x:\winpart.txt
@echo create partition msr size=128>>x:\winpart.txt
@echo create partition primary>>x:\winpart.txt
@echo format quick fs=ntfs label="Windows">>x:\winpart.txt
@echo assign letter="W">>x:\winpart.txt
@echo shrink desired=450>>x:\winpart.txt
@echo create partition primary>>x:\winpart.txt
@echo format quick fs=ntfs label="Recovery">>x:\winpart.txt
@echo assign letter="R">>x:\winpart.txt
@echo set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac">>x:\winpart.txt
@echo gpt attributes=0×8000000000000001>>x:\winpart.txt
@echo exit>>x:\WinPart.txt
@echo Winpart.txt now contains…..
@echo.
type x:\winpart.txt
@echo.
@echo.
@echo *****************************************************************
@echo  Setting up the partition table
@echo *****************************************************************
@echo call diskpart /s x:\winpart.txt
diskpart /s x:\winpart.txt
@echo.
@echo.
@echo *****************************************************************
@rem  Map drive letter for Install.wim
@echo *****************************************************************
@echo.>x:\ListVol.txt
@echo List volume>>x:\ListVol.txt
@echo exit>>x:\ListVol.txt
@echo call diskpart /s x:\ListVol.txt
call diskpart /s x:\ListVol.txt>x:\Output.txt
@echo.
@echo.
@rem Go through each drive letter, looking for the images\Install.txt file
for /f "skip=8 tokens=3" %%A in (x:\Output.txt) do (
if exist %%A:\images\install.txt set InstallPath=%%A:\images&& echo "Found device with images folder and install.txt file"
if exist %%A:\images\ set InstallPath=%%A:\images&& echo "Found device with images folder"
)
@echo.
@echo.
@rem Check InstallPath was found and there are images in it.
@echo.
@echo *****************************************************************
@rem  Select WIM
@echo *****************************************************************
@echo.
setlocal enabledelayedexpansion
cd /d %InstallPath%
set num=""
for /f "delims=" %%i in ('dir /a-d /b *.wim') do (
    set /a num+=1
    if "!num!" == "!num!" set WIM_NAME!num!=%%i
)
if NOT "%WIM_NAME3%"=="" echo Can not specified *.WIM && goto :Error
set TARGET_WIM=%WIM_NAME1%
    if /i "%TARGET_WIM%"=="Winre.wim" (
    set TARGET_WIM=%WIM_NAME2%
)
@echo %TARGET_WIM%
if "%TARGET_WIM%"=="" echo The windows image name not specified && goto :Error
if NOT EXIST %InstallPath%\%TARGET_WIM% echo "Install.wim NOT found." && goto :Error
@echo Install.wim FOUND at %InstallPath%\images\install.wim
@echo.
@echo.
@echo Making directories…
md w:\recycler\scratch
if %errorlevel% NEQ 0 echo "Failed to make w:\recycler\scratch directory" && goto :error
@echo.
md r:\recovery\windowsre
if %errorlevel% NEQ 0 echo "Failed to make m:\recovery\windowsre directory" && goto :error
@echo.
@echo *****************************************************************
@echo  Applying the Windows image from the USB
@echo *****************************************************************
@echo call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%" /index:1 /applydir:w:\ /compact /scratchdir:"w:\recycler\SCRATCH
call dism /apply-image /imagefile:"%InstallPath%\%TARGET_WIM%" /index:1 /applydir:w:\ /compact /scratchdir:"w:\recycler\SCRATCH
if %errorlevel% NEQ 0 echo "Failed to apply image to w:" && goto :error
@echo.
@echo.
@echo.
@echo *****************************************************************
@rem  Move WinRE to Recovery Partition
@echo *****************************************************************
@echo.
@echo Modifying attributes of winre.wim so we can move it.
attrib w:\Windows\System32\recovery\winre.wim -s -h -a -r
@echo if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre
if EXIST w:\Windows\System32\recovery\winre.wim move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre
if %errorlevel% NEQ 0 echo "Failed to move winre.wim to r:\recovery\windowsre" && goto :error
@echo.
@echo xcopy %InstallPath%\Winre\Winre.wim r:\recovery\windowsre /y
xcopy %InstallPath%\Winre.wim r:\recovery\windowsre /y
if %errorlevel% NEQ 0 echo "Failed to copy winre.wim to r:\recovery\windowsre" && goto :error
@echo reset attributes now
attrib r:\Recovery\Windowsre\winre.wim +s +h +a +r
@echo.
@echo.
@echo *****************************************************************
@echo  Setting the boot environment
@echo *****************************************************************
@echo call w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all
@rem w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all
w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS
if %errorlevel% NEQ 0 echo "Failed to set boot information" && goto :error
@echo.
@echo *****************************************************************
@echo  Setting the recovery environment
@echo *****************************************************************
@echo w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows
w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows
if %errorlevel% NEQ 0 echo "Failed to set recovery information" && goto :error
@echo.
rmdir /s /q w:\recycler
@echo.
%WinPESource%Scripts\Tools\H2OUVE-W-Q2S.exe
IF EXIST w:\"Program Files"\H2OUVE-W.exe DEL /q w:\"Program Files"\H2OUVE-W.exe
IF EXIST w:\"Program Files"\RunQ2S.bat DEL /q w:\"Program Files"\RunQ2S.bat
IF EXIST w:\"Program Files"\VarDate.xml DEL /q w:\"Program Files"\VarDate.xml
IF EXIST w:\"Program Files"\VarEdit.txt DEL /q w:\"Program Files"\VarEdit.txt
IF EXIST %WinPESource%I-NET_x86.msi DEL /q w:\Windows\OEM\I-NET_x86.msi
IF EXIST %WinPESource%I-NET_x86.msi COPY /y %WinPESource%I-NET_x86.msi w:\Windows\OEM
if "%FLASH_BIOS%"=="1" GOTO :FLASH_BIOS
Goto :END

:FLASH_BIOS
@echo.
@echo *****************************************************************
@echo     Flash BIOS
@echo *****************************************************************
@echo.
@echo   BIOS file FOUND at %InstallPath%\BIOS\*.ROM
@echo.
xcopy /y %InstallPath%\BIOS\*.ROM %WinPESource%Scripts\Tools\
for /r "%WinPESource%Scripts\Tools" %%Z in (*.ROM) do (
  ren "%%Z" "%%~na.fd"
)
if NOT EXIST %WinPESource%Scripts\Tools\*.fd echo "Can not find the BIOS file" && goto :error
@REM Flash BIOS
%WinPESource%Scripts\Tools\H2OFFT-W.exe
Del /q %WinPESource%Scripts\Tools\*.fd
if %errorlevel% NEQ 0 echo "Failed to flash BIOS" && goto :error
@echo *****************************************************************
@echo  Image deployment COMPLETE. Type EXIT from Command
@echo  Prompt to restart or turn off device.
@echo *****************************************************************
goto :END

:ERROR
color 4f
@echo.
@echo An error has been detected.
@echo.
pause >nul
goto :ERROR

:ListPar
@REM This section is to bring a disk number and use it to List Partitions
@echo.
set TempDisk=%1
diskpart /s x:\Par.txt>x:\ParOutput.txt
for /f "skip=26 tokens=4" %%A in (x:\ParOutput.txt) do (
if /i NOT "%%A"=="Winpe" set Disk=%TempDisk%
)
Goto :EOF

:END
@rem For recovery
@echo.
attrib -s -h w:\Recovery
if NOT EXIST w:\Recovery\OEM md w:\Recovery\OEM
if NOT EXIST w:\Recovery\OEM\Backup md w:\Recovery\OEM\Backup
if EXIST %WinpeSource%Scripts\OEM xcopy /cherkyi %WinpeSource%Scripts\OEM\* w:\Recovery\OEM\
@echo Wallpaper
if EXIST w:\Windows\Web\Wallpaper set WALLPAPER_DIR=w:\Windows\Web\Wallpaper
setlocal enabledelayedexpansion
set num=""
for /f %%i in ('dir /b /ad "%WALLPAPER_DIR%"') do (
    set /a num+=1
    if "!num!" == "!num!" (
        if NOT "%%~ni"=="Windows" (
            if NOT "%%~ni"=="Theme1" (
                if NOT "%%~ni"=="Theme2" (
                    set WALLPAPER_DIR_NAME=%%~ni
        ) else (
            echo Excluded %%~ni
        )
        ) else (
            echo Excluded %%~ni
        )
        ) else (
            echo Excluded %%~ni
        )
    )
)
if NOT "%WALLPAPER_DIR_NAME%"=="" xcopy /cherkyi w:\Windows\Web\Wallpaper\%WALLPAPER_DIR_NAME%\* w:\Recovery\OEM\Backup\Wallpaper\%WALLPAPER_DIR_NAME%\
@echo.
if EXIST w:\Windows\Panther\Unattend.xml xcopy /chrkyi w:\Windows\Panther\Unattend.xml w:\Recovery\OEM\Backup\
if EXIST w:\Windows\Panther\oemlogo.bmp xcopy /chrkyi w:\Windows\Panther\oemlogo.bmp w:\Recovery\OEM\Backup\
@echo.
if EXIST w:\Users\Default\AppData\Local\Microsoft\Windows\Shell\LayoutModification.xml xcopy /chrkyi w:\Users\Default\AppData\Local\Microsoft\Windows\Shell\LayoutModification.xml w:\Recovery\OEM\Backup\
@echo.
if EXIST w:\Windows\System32\Drivers\SileadTouch.fw xcopy /chrkyi w:\Windows\System32\Drivers\SileadTouch.fw w:\Recovery\OEM\Backup\
if EXIST w:\Windows\Inf\TouchSetting.gt xcopy /chrkyi w:\Windows\Inf\TouchSetting.gt w:\Recovery\OEM\Backup\
@echo.
if EXIST w:\Windows\OEM xcopy /cherkyi w:\Windows\OEM\* w:\Recovery\OEM\Backup\
@echo.
if EXIST "w:\ProgramData\Microsoft\Windows\Start Menu\Programs\Insyde\DualOSSwitcher.lnk" xcopy /chrkyi "w:\ProgramData\Microsoft\Windows\Start Menu\Programs\Insyde\DualOSSwitcher.lnk" w:\Recovery\OEM\Backup\
attrib +s +h w:\Recovery
@echo.
@echo *****************************************************************
@echo  Copy over Test tools to \TEST_TOOL
@echo  \TEST_TOOL  SHOULD BE DELETED PRIOR TO SHIPPING
@echo *****************************************************************
@echo %WinpeSource%Scripts\7za.exe x w:\TEST_TOOL.zip -oW:\
if EXIST %WinpeSource%TEST_TOOL.zip %WinpeSource%Scripts\7za.exe x  %WinpeSource%TEST_TOOL.zip -oW:\
@echo.
@echo *****************************************************************
@echo  Copying over Unattend.xml to use on factory floor if it exists
@echo *****************************************************************
@echo if EXIST %InstallPath%\Unattend.xml copy %InstallPath%\Unattend.xml w:\Windows\Panther /y
if EXIST %InstallPath%\Unattend.xml copy %InstallPath%\Unattend.xml w:\Windows\Panther /y
@echo.
@echo *****************************************************************
@echo  Copying over NON Scanstate Packages, if they exist.
@echo  IF YOU COPY OVER SCANSTATE PPKG, THIS CAUSE IMAGE TO FAIL DURING RECOVERY
@echo *****************************************************************
@echo.
@echo if EXIST %InstallPath%\*.ppkg copy %InstallPath%\*.ppkg w:\Recovery\Customizations /y
if EXIST %InstallPath%\*.ppkg copy %InstallPath%\*.ppkg w:\Recovery\Customizations /y
@echo Apply PPKG
setlocal enabledelayedexpansion
set PPKG_PATH=w:\Recovery\Customizations
cd /d %PPKG_PATH%
set num=""
for /f "delims=" %%i in ('dir /a-d /b *.ppkg') do (
    set /a num+=1
    if "!num!" == "!num!" (
        @echo if /i "%%~ni"=="usmt" DISM /Apply-CustomDataImage /CustomDataImage:!PPKG_PATH!\%%~ni.ppkg /ImagePath:w:\ /SingleInstance
        if /i "%%~ni"=="usmt" DISM /Apply-CustomDataImage /CustomDataImage:!PPKG_PATH!\%%~ni.ppkg /ImagePath:w:\ /SingleInstance
        @echo if /i NOT "%%~ni"=="usmt" DISM.exe /Image:w:\ /Add-ProvisioningPackage /PackagePath:!PPKG_PATH!\%%~ni.ppkg
        if /i NOT "%%~ni"=="usmt" DISM.exe /Image:w:\ /Add-ProvisioningPackage /PackagePath:!PPKG_PATH!\%%~ni.ppkg
    )
)
@echo.
@echo *****************************************************************
@echo  Image deployment COMPLETE. Type EXIT from Command
@echo  Prompt to restart or turn off device.
@echo *****************************************************************
@rem
@rem  Get finish time so we can evaluate total WinPE phase time.
@rem
call |time>x:\StopTime.txt
@rem
@rem  Now parse both files to display the Start and Finish Time
@rem
@echo.
@echo.
for /f "tokens=5" %%A in (x:\starttime.txt) do echo Script Start Time is %%A
for /f "tokens=5" %%A in (x:\stoptime.txt) do echo  Script Stop Time is %%A
@echo.
exit