- Title: LG LU6200
- Listed: April, 2013
- Last modified: 04/25/2013 3:13 pm
- Version: ROM Android 4.2.2 CM10.1
You must be logged for ROM download.
25648 total views, 3 today
3 Total favorites
Member Info
DESCRIPTION
ROM Mobile LG LU6200 – ROM Android 4.2.2 CM10.1
Install ROM :
1.Connect your phone to PC using USB cable.
2.Copy downloaded files to the SD card of your phone. Important: Don’t extract any files.
3.Disconnect USB and then turn off your phone.
4.Boot into recovery mode. To do so, Hold volume-down and power until you see the scary warning screen and then Confirm by tapping the power button twice. You can try this: Recovery Mode without Key Combination.
5.Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
6.Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
7.Select install zip from sdcard, then select choose zip from sdcard. Now, locate the cm_lu6200-0417.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
8.Once the ROM installation process end, repeat the step 7 but choose the gapps-jb-20130301-signed.zip file instead of ROM zip to install the Google apps package.
9.When installation is completed, go back to the main recovery menu and select reboot system now to reboot the phone and boot up into customized Android 4.2.2 Jelly Bean ROM CM10.1. The first boot will take time, so be patient!
10.Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
※Please make a backup of your device before installing or updating ROM
Already test it. After flashing the rom, flashing google apps and then reboot the phone, it was successful. But when i turn off the phone and turn it on again it didn’t enter to the system directly. It was boot loop 3-4 times before entering the system.
Wifi ok, Bluetooth ok, cellular ok, brightness ok, camera ok, but….gps is not working. There is no gps toggle.
Other hardware toggle also reverse. If tap “on” the toggle became gray, if tap “off” it became solid.
gps tu bhodi che lena ya bond ma
lun hund sister towadi nu lun bhodi dyo koi se sai ve upload kar dya kro mn twadi mom nu lun pawan
hi friends this rom is working fine … i have just downloaded it and its flashes fine …..
i will be leave a vedio of this rom for about after 5 days