Responses to “M-HORSE GT-7562 (BML 9500)”

1. 

   09/28/2013
   

    

   logist2013 on 09/29/2013 @ 3:11 pm

   hello

   i have downloaded the rom and i used the flasher but after a while a message came up

   failed:wait input time out

   what is the problem ???

   thank you in advance for your help

   Log in to reply.
   • 

     09/27/2013
     

      

     bencebacsi on 09/30/2013 @ 11:42 pm

     You have to put your phone into boot mode.

     1.Put out the battery and after a few seconds insert it again into the phone.

     2. Start the flashing process in ResearchDownload

     3. Press and keep pressed the 'vol up' (sometimes 'vol down') button on your phone and connect it to the USB.

     4. After the flashing process has been started, you may release the volume button.

     If you're still unsuccessful, than check in Windows' device manager wether the com port of your phone is existing or not.
2. 

   10/11/2013
   

    

   mmirallas on 10/12/2013 @ 3:17 pm
   Hello, perform the procedure but I get the following error: Removed Failed: Wait input time out.

   And now no longer recognized to do so again.

   I have another identical phone, I can record this rom to pass that this failed?

   Thanks

   Log in to reply.
   • 

     09/27/2013
     

      

     bencebacsi on 10/13/2013 @ 11:35 pm

     Than you have problem with your usb cable or connector. Your other phone can not give you better help than the pac files provided here.
3. 

   10/08/2013
   

    

   czt on 10/16/2013 @ 6:15 pm

   hello

   I have a mobile BML 9500 and the factory firmware was c920_JHM_E04_3D_v04.

   C920_JHM_E04_3D_v05 I've installed and it works great but the screen is very clear as if it needed color. You know how to fix that?

   
   Thanks and sorry for my bad English.

   greetings

   Log in to reply.
4. 

   10/11/2013
   

    

   corvion on 10/17/2013 @ 11:14 am

   Hi

   I tried all this roms but I can not see anything in the screen but I can hear the sound. My phone (BML 9500 sp6820a) had installed this rom: 6820_2.3.5_c920_JHM_E07_v07. Can you help me, please?

   thanks

   Log in to reply.
5. 

   09/27/2013
   

    

   bencebacsi on 10/19/2013 @ 5:04 am

   Version Firmware c920_JHM_E07_3D_v04 is applicable for BML 9500. If you had an other version originally, that's still possible that version contained different LCD driver. Because both uboot and system containd the LCD driver, the only way to recover your phones is to find the approriate firmware for them. If I get new versions I will provide them here.

   "the screen is very clear as if it neededcolor" – I'm sorry but that sentence is unundersandable.

   Log in to reply.
6. 

   10/08/2013
   

    

   czt on 10/19/2013 @ 9:59 am
    

   Thanks for responding.

   I think there must be several versions of BML 9500. I tried the Firmware c920_JHM_E07_3D_v04 on my phone but it is not supported, does not work the camera or wifi and the screen does not rotate. The factory brought the Firmware c920_JHM_E04_3D_v04.

   The color of the screen, I can only hope that a new firmaware compatible with my phone.

   Thank you very much and greetings.

   Log in to reply.
7. 

   10/21/2013
   

    

   koseekoo on 10/23/2013 @ 11:48 am

   I need BML i9500 (6820 c920 jhm v06 v08) please help me.

   Log in to reply.
8. 

   10/23/2013
   

    

   eared on 10/23/2013 @ 11:48 am

   Need version 08

   Log in to reply.
9. 

   10/23/2013
   

    

   bambekur on 10/23/2013 @ 12:20 pm

   Hi!

   I tried install the Firmware c920_JHM_E07_3D_v04 but i get this error: signature vertification failed. I rooted my phone before and it worked fine but i tried to move the launcher to the sd card and uninstalled it from the memory. After that I my phone can t start it has a boot loop and i think if i can install this maybe itt will work again. Factory settings and wipe data in recovery mode didn't work. I don't know what am i suppose to do.

   Thank you very much!

   Log in to reply.
   • 

     09/27/2013
     

      

     bencebacsi on 10/26/2013 @ 7:20 pm

     Hi,

     1. If you've restored the factory settings from recovery, that's your failure becuase USB debugging has probably been disabled. If that has not been happened, you can simply connect your phone the USB in powered-off state and after a few seconds the USB ADB connection will be established. Then you can simply paste again the deleted launcher file using a PC to ADB file manager like the following one:

     http://www.mediafire.com/downl....._0.99c_beta.zip

     2. The firmware file provided here are not update zip files. They've been compressed just for getting smaller download size but you have to extract them before using and they can be flashed via USB connection by the factory flasher also provided here.
   • 

     08/13/2014
     

      

     Mauro Nontelodico on 08/14/2014 @ 2:04 am

     I have the same problem, how do you resolve it?

     Thanks in advantage, regards
10. 

    10/21/2013
    

     

    koseekoo on 10/23/2013 @ 6:48 pm

    I need (need) firmware ' 6820 c920 e06 v08 'rom. help me !!

    Log in to reply.
    • 

      09/27/2013
      

       

      bencebacsi on 10/26/2013 @ 7:23 pm

      I also need that version. If you've got a working phone with it, we can work out together to make a backup of your device.