- Title: Moto Edge 2022 XT2205-2 ATT 15
- Listed: November, 2025
- Last modified: 07/24/2026 8:43 am
- Version: ROM Android 15
You must be logged for ROM download.
1791 total views, 3 today
Member Info
DESCRIPTION
ROM Phone Moto Edge 2022 XT2205-2 ATT – ROM Android 15
ONLY MT6879
ROM 2 – Official Moto Edge 2022 XT2205-2 ATT version: 15_V1STS35H.71-19-6-10 – TESLA_ATT
ROM 1 – Official Moto Edge 2022 XT2205-2 ATT version: 15_V1ST35H.71-19 – TESLA_ATT
Gapps include – No Rooted
Language support : Multilang
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Under Download-XML, Click on the Choose button.
- Locate the XML File in the rom called "flashfile.xml"
- if you have the file "Authentication File" also located in the decompressed rom
- Click the "Download" button
- Connect your Mediatek Device to the computer using the USB Cable (make sure it is power off).
- After connecting the device to the computer Press Volume Down or Volume Up key, so that SP Flash Tool can detect the device.
- Once the computer detects the device, the flashing or installation process will begin automatically.
- the installation process is completed, a Green Ring will appear.
- Finish !
- Close the SP Flash Tool and disconnect your Mediatek device from the computer.
Loading...
Need help, the flashfile.xml It does not recognize on flashtools
Hi
have you a error code
yes, i have the flashfile.xml is invalid….. i uploaded a pic for it
uploaded the error
re
try with
and use this version flashtools
same issue and i used this SP Flash Tool v6.2404.00.000 version or i need to install some drivers?
driver is in pack flashtools
or try another method : Flash XML-to-Batch Tool
- Step 1: Prepare the Tools
To generate the necessary commands, you will need the ROM and the XML-to-Batch Tool.
Extract the ROM and the XML-to-Batch Tool onto your computer.
Open the ROM folder and copy the flashfile.xml file.
Paste the flashfile.xml file into the folder located inside the XML-to-Batch Tool.
- Step 2: Generate the Flash File
Once the flashfile.xml is in the correct folder, double-click 2-rsd-flash-flashfile-windows.bat.
A command prompt (CMD) window will open. Press any key to start.
Wait for the process to finish. A new file named flashfile.bat will be created.
- Step 3: Prepare for Installation
The generated flashfile.bat now contains all the specific commands required to install the ROM.
Move the flashfile.bat into your ROM folder.
Ensure the ROM folder also contains the ADB/Fastboot files and that your drivers are properly installed.
Ensure the ADB Setup 1.4.3.exe drivers are installed on your PC.
- Step 4: Flash the ROM
Enter Fastboot Mode: With the phone turned off, press and hold the Volume Down and Power buttons simultaneously for 3 to 5 seconds.
Connect to PC: Connect your phone to the computer using the original USB data cable (or a high-quality equivalent).
Start Flashing: Double-click the flashfile.bat file to begin the installation.
Note:
The installation time depends on the size of the ROM.
Your device may take several minutes to reboot for the first time. Please be patient and do not interrupt the process.
Thanks for your help