DESCRIPTION

ROM Phone Moto Edge 50 Pro XT2403-4 RETJP 15 – ROM Android 16

ONLY Qualcomm Snapdragon 7 Gen 3

ROM Official Moto Edge 50 Pro XT2403-4 RETJP 15 version: 16_W1UMS36H.52-22-2-8_– EQE_RETJP

Gapps include – No Rooted

Language support : Multilang

Install ROM:

- Step 1: Prepare the Tools
To generate the necessary commands, you will need the ROM and the XML-to-Batch Tool.
Extract the ROM and the XML-to-Batch Tool onto your computer.
Open the ROM folder and copy the flashfile.xml file.
Paste the flashfile.xml file into the folder located inside the XML-to-Batch Tool.

- Step 2: Generate the Flash File
Once the flashfile.xml is in the correct folder, double-click 2-rsd-flash-flashfile-windows.bat.
A command prompt (CMD) window will open. Press any key to start.
Wait for the process to finish. A new file named flashfile.bat will be created.

- Step 3: Prepare for Installation
The generated flashfile.bat now contains all the specific commands required to install the ROM.
Move the flashfile.bat into your ROM folder.
Ensure the ROM folder also contains the ADB/Fastboot files and that your drivers are properly installed.
Ensure the ADB Setup 1.4.3.exe drivers are installed on your PC.

- Step 4: Flash the ROM
Enter Fastboot Mode: With the phone turned off, press and hold the Volume Down and Power buttons simultaneously for 3 to 5 seconds.
Connect to PC: Connect your phone to the computer using the original USB data cable (or a high-quality equivalent).
Start Flashing: Double-click the flashfile.bat file to begin the installation.

Note:
The installation time depends on the size of the ROM.
Your device may take several minutes to reboot for the first time. Please be patient and do not interrupt the process.