DESCRIPTION

STOCK MYPHONE RIO 2 FUN FIRMWARE

SPECS:

-1.3 GHZ MT6582M Quad Core Processor

-Mali 400MP2 GPU

-8GB ROM

-1GB RAM

-Dual SIM

-5MP AF Back Camera

-5MP FF Front Camera
-Android 5.0 Lollipop

-Upto 3g/HSPA+ Data Connectivity

-Light, Proximity, Orientation, Gravity and Light Sensors

-2,000 MAH Battery

PART 1: (INSTALLING DRIVERS)

•Tinno Drivers:

   -Download Tinno Drivers

  -Install on your Computer (Follow on Screen Instructions)

  -Attach your MP R2F to your Computer using your USB Chord without Battery first.

  -The Computer should detect it(Installing New Hardware)

  -If not detected, put the Battery back on you MP R2F or change USB Chord

PART 2: (APPLYING FIRMWARE)

Using Smart Phone Flash Tool(Did not test this on my MPR2F but have use this on my other MTK Devices)

  -Download SP_Flash_Tool_v5.1352.01.zip and MPR2F-Firmware.rar

  -Copy the downloaded files on you Computers Desktop and Extract the 2 files.

  -On the extracted SP_Flash_Tool_v5.1352.01.zip, right click on flash_tool.exe and Run as Administrator

  -Click Scatter-loading button on the upper right side

  -Find and select the MT6582_Android_scatter.txt inside the extracted MPR2C-Firmware.rar

  -Select Firmware Upgrade on the selection below the Scatter-loading field

  -Click Download Button on the top

  -Connect your MPR2F on your Computer without battery, SPFT will detect your device if you installed the drivers correctly

  -SPFT will start loading, wait until finish, you will know if it finish loading when you see a Green Check Pop-up.

  -Done

NOTE: This method most likely will corrupt the IMEI of your phone, you can search for restoring IMEI on YouTube or Google.

CREDITS:

-XDA

※Please make a backup of your device before installing or updating ROM