DESCRIPTION

ROM Phone Namo NX3 – ROM Android 4.2.2

ONLY MT6572

Official Rom Namo NX3 Version:

ATTENTION Three versions:

ROM 1 : A730_TD_OLD_HWV1.1_SWV1.7 – hzcenon72_wet_jb3

ROM 2 : NX3_20140402 – z260_wvga_kwe_edge – Z260-H-KWE-01-XL-EDGE-WVGA-EMMC-4G+4G-K01-F01-V04 – ONLY 2G GSM

ROM 3 : NX3_20140617 – z260_wvga_kwe_td – Z260-J-KWE-01-XL-TD-EDGE-WVGA-EMMC-K01-F01-V10 – ONLY TD-SCDMA

Gapps  include -  No Rooted

Language support : Multilang

Install ROM :

Install with SP MDT:

1). Turn off the smartphone. Cable is not connected to the computer.

2). Remove the battery and insert it again

3). Connect your phone to a computer cable. The operating system detects a new device

4). Disconnect the cable from the computer.

5). Run SPMultiPortFlashDownloadProject.exe

6). Choose Database Factory menu> Configuration File data source and specify the file MTK_DATABASE.mdb (it is in the folder SP_MDT).

7). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

8). Click File and select the MT6572_Android_scatter.txt file (it's in the folder with the rom).

9). Click "Start all".

10). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer, remove and insert the battery and reconnect it to the computer.

11). After (OK) click Stop and disable any phone.

12). Completed.

※Please make a backup of your device before installing or updating ROM