• Title: Nokia X2
  • Listed: 02/04/2022 8:33 am
  • ROM Version: ROM Platform 2.0
  • You must be Membership (Account Premium)
    for ROM download.

Overall Rating : 0

292 total views, 4 today


Nokia X2

Author adMember Info


  • Listed by: SoCr@Te
  • Member Since: 05/15/0470


ROM Mobile Nokia X2 – ROM Platform 2.0

ONLY Qualcomm Adreno 302

ROM Offical Nokia X2 Version : rm1013_2.1.0.12_059V787

Language support: Multilang


ROM Install :


Step 1: Download and Install the Qualcomm USB driver on your PC, and If you have already installed the driver, then skip this step.
Step 2: Download and extract the Qualcomm Flash Image Loader (QFIL) tool on your PC.
Step 3: After extracting, right-click on “QFIL .exe” and run it as administrator.
Launch QFIL Tool
Step 4: Now You have to connect your mobile device to the PC while in EDL Mode.
Follow these steps to connect your device in EDL Mode with PC:
1. Power off your mobile phone.
2. Press Volume UP+Volume Down buttons and connect your device to the computer (Make sure your device should be in EDL mode before connecting to PC). Some mobile phones may require a various key combination to enter EDL mode.

Step 5: Once your mobile device is successfully connected, then you will be able to see “Qualcomm HS-USB QDLoader 9008” in QFil tool. Next, Under Select Build Type, tick Flat Build.
Step 6: Click on Browse Button and load your device’s Stock firmware (.mbn /or .elf /or .hex) file. And from here follow the instructions on the screen.
Step 7: Click Load XML
Step 7: After click “Load XML” button a pops up window will open, select the rawprogram0.xml file in this window and click open.
Step 8: Another pop-up window will automatically open again, select the patch0.xml file in this window then click open.
Step 9: Next, hit the Download button to start the flashing on your device.
Step 10:After pressing the download button, the flashing process will start on your Qualcomm device. And you can see a progress bar that will run. Wait for finish download dialogue box.
Step 11: After the flashing process is done, you will see Download Succeed or Finish Download message in Qfil tool. It means you have successfully Flash your Qualcomm device using the Qfil. Now unplug your device from the computer and wait for some time as it takes 5- 10 minutes after first boot.

※Please make a backup of your device before installing or updating ROM

Leave a Reply

You must be logged in to post a comment.