- Title: O+ Air
- Listed: March, 2015
- Last modified: 03/11/2015 5:29 pm
- Version: ROM Android 4.4.2
You must be logged for ROM download.
24823 total views, 5 today
8 Total favorites
Member Info
DESCRIPTION
ROM Phone O+ Air- ROM Android 4.4.2
ONLY MT6592
Official ROM O+ Air version:
ROM 1 – AIR_V8_0_9 – huaqin92_cwet_kk – Flash version
ROM 2 – AIR_V8_1_0 – huaqin92_cwet_kk – OTA ( V8_0_9 —-> V8_1_0 )
Gapps include – No Rooted
Language support: EN
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
OTA
1.copy update.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again
3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.
4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose“apply update from sdcard”
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
9.Choose “reboot system now”,then press volume+ button to reboot your phone.
※Please make a backup of your device before installing or updating ROM
https://www.youtube.com/watch?.....v=E1Wa0qx9OWk
chek nyu imei nyu sa box ng cp nyu
mga sir di ko mainstall gamit flashtool hindi nadedetect yung o+air ko after ko iload yung scatter file. pahel naman thanx
It worked for me after a while. (8.0.9)
I searched a bit why my Flash Tool wouldn't work… one answer was that I had to install unsigned drivers, so I had to disable driver enforcement. Then I download and installed MT65xx/MediaTek USB drivers. But it still didn't work. Google it.
In the end, I just made a simple mistake in not following instructions. It all worked out when I connected my device AFTER pressing the Download button on the SP Flash Tool. *sigh* I'm not sure if installing the drivers helped, but if this step didn't work for you, do the one above first.
8.1.0 wouldn't work though, I tried to install AIR_V8_1_0.zip as is and the .zip files contained inside through the steps written above and they wouldn't work.
Note: You'd lose the IMEI of your phone after flashing it. Best make a copy before flashing through 1. Dialing *#06# on your phone or 2. Use MTK Droid Tool to obtain it. Then, after flashing, you just try to find a way to put it back. MTK Droid Tool didn't work for me, but installing a (shortcut to) MTK Engineer Mode then doing some steps worked. There's a YouTube video for that. Google it.
Sir YO have ROM for O+ Air V8.0.7 thanks sir
Bakit po kaya ayaw mag update ng unit ko after flashing? nasubukan ko po wyung OTA pero di gumana, ng may mag notification naman na may new wireless update ay sinubukan ko din pero same problem, update failed din at nakalagay ay invalid da yung update zip ko na nadownload. Kahit ilang try ko idownload mula sa wifi yung wireless update ay lagi syang update failed. Patulong naman po, thanks….
Baka po may maka provide nang Video tutorial or kahit photos po , pwede makahingi ?
Not working po na sa OTA ???
Thank for this stock rom my O+ air v8.0.7 is not back to life its a big help thank you very much its working 100% my O+ version before is 8.0.7 now upgrade to O+ Air V8.0.9 thank you so much my friend for this file im using this SP_Flash_Tool_v5.1424 to flash this file … my problems is the IME is gone naging NULL na lang paano ma ibalik ang IME??
Thank for this stock rom my O+ air v8.0.7 is now back to life its a big help thank you very much its working 100% my O+ version before is 8.0.7 now upgrade to O+ Air V8.0.9 thank you so much my friend for this file im using this SP_Flash_Tool_v5.1424 to flash this file … my problems is the IME is gone naging NULL na lang paano ma ibalik ang IME??
THANKS YOU SO MUCH Sir … You Save My Phone Life
Sir paano mo natangal yung battery ?
naka sabi kasi sa instruction revove battery ehh, k
Sa mga nakawindows 8 pataas, off nyo muna yung driver signature bago iinstall yung adb driver ng mtk65xx para marecognize ng flash tool yung cp nyo. dyan din kasi ako nahirapan nung tinry kong gawing yung tutorial. Search nyo nalang kung pano ioff yung driver signature, medyo madali lang naman.
salamat po d2 working na po o+air
sa flash tools