• Title: Oukitel K6000 Pro, TWRP 3.2.1-0 for ARM64 FZ V26 ROM (Android Nougat 7.x)
  • Listed: 02/23/2018 6:16 pm
  • ROM Version: TWRP 3.2.1-0 for OUKITEL K6000 ROM FZ V26 Pro 20170830 (Android Nougat 7.x)
  • You must be logged for ROM download.


Overall Rating : 9


5316 total views, 2 today

2 Total favorites

  

Oukitel K6000 Pro, TWRP 3.2.1-0 for ARM64 FZ V26 ROM (Android Nougat 7.x)

Author adMember Info

OlafGER


DESCRIPTION



NEW Oukitel K6000 Pro TWRP 3.2.1-0

for ARM64 FZ V26 ROM (Android Nougat 7.x)


 

Step…

1. Copy SuperSU 2.82.zip to internal or external sd card

2. Switch off the phone

3. Flash TWRP 3.2.1-0 with SP Flash Tool… Not boot the phone!

4. Enter recovery mode press volume up & power button, to confirm press volume down

5. Flash SuperSU 2.82.zip

6. Wipe dalvik cache

7. Reboot the phone

8. Give me five stars. I thank you very much for your appreciation of my work!

 


Quality from a German 


 



※Please make a backup of your device before installing or updating ROM


14 Responses to“Oukitel K6000 Pro, TWRP 3.2.1-0 for ARM6”







  1. 08/17/2013

    Nigeria

    Thanks, I hope this works.





  2. 08/17/2013

    Nigeria

    It didn't work. Fortunately, the 3.0.3.0 worked.

    • OlafGER




      04/28/2016

      Germany

      Excuse me, what's wrong with you? On 3 devices I tested the TWRP with the V26 ROM!

      Who of the users still has problems with the TWRP?

       

    • SkyOnAndroid




      07/15/2016

      Germany

      the twrp is working fine. But depending on what android version, mm-n or 32bit-64bit you are on, the twrp will make some problems. 

      You gotta need the right firmware, which is v26. And everything will work just fine. 

      Thanks for your work olaf!





  3. 02/26/2018

    Thanks a lot! It works great, take your 5 stars, man!





  4. 08/18/2015

    Hungary

    It does not work for me either, I'm on FZ V26 Pro 20170830, the SP flash tool flashes it without any error in download only mode, but when trying to enter recovery it only boots to system, but TWRP 3.0.3.0 FZ_V24 works for me…dont know why :) any ideas?





  5. 08/26/2014

    Greece

    Works OK on FZ V26 Pro 20170830. Thanks !!!!!





  6. 10/09/2017

    France

    I'm on FZ V26 Pro 20170830, I tried this version and the TWRP 3.0.3.0 FZ_V24 but still doesn't work for me, instead of going into TWRP it just boot normaly.

    When I was on V12 Android 6.0 the TWRP (for that version) was working…

     

    So how to TWRP for FZ V26 Pro 20170830?





  7. 02/25/2018

    India

    First of all, You need to Install MediaTek Driver on your PC. you can follow link down below 

    https://androidjungles.com/ins.....b-vcom-drivers/

     





  8. 02/25/2018

    India

    First of all, You need to Install MediaTek Driver on your PC. you can follow link down below 

    https://idevicehelp.net/instal.....b-vcom-drivers/

    For More Visit iDeviceHelp.net





  9. 04/18/2016

    France

    Not working. Tested on V26 : https://www.needrom.com/downlo.....000-pro-fz-v24/





  10. 01/22/2017

    Netherlands

    It is working on the V26 ROM.

    But there is a minor flaw in the description! That is probably where some of you go wrong. If you follow point 4 it will boot normal. Instead you need to change the default at the very small box on the left side from the screen. If you cannot read, you need the first line on top!

    like I descibed below.

    4. Enter recovery mode press volume up & power button, now switch with volume up to "boot in recovery" and then confirm by press volume down

    I hope this will help.


Leave a Reply

You must be logged in to post a comment.