- Title: Oukitel K6000 Pro, TWRP 3.2.1-0 for ARM64 FZ V26 ROM (Android Nougat 7.x)
- Listed: February, 2018
- Last modified: 02/23/2018 6:16 pm
- Version: TWRP 3.2.1-0 for OUKITEL K6000 ROM FZ V26 Pro 20170830 (Android Nougat 7.x)
You must be logged for ROM download.
15801 total views, 2 today
2 Total favorites
CUSTOM
Member Info
DESCRIPTION
NEW Oukitel K6000 Pro TWRP 3.2.1-0
for ARM64 FZ V26 ROM (Android Nougat 7.x)
Step…
1. Copy SuperSU 2.82.zip to internal or external sd card
2. Switch off the phone
3. Flash TWRP 3.2.1-0 with SP Flash Tool… Not boot the phone!
4. Enter recovery mode press volume up & power button, to confirm press volume down
5. Flash SuperSU 2.82.zip
6. Wipe dalvik cache
7. Reboot the phone
8. Give me five stars. I thank you very much for your appreciation of my work!
Quality from a German 
※Please make a backup of your device before installing or updating ROM
Thanks, I hope this works.
It didn't work. Fortunately, the 3.0.3.0 worked.
Excuse me, what's wrong with you? On 3 devices I tested the TWRP with the V26 ROM!
Who of the users still has problems with the TWRP?
the twrp is working fine. But depending on what android version, mm-n or 32bit-64bit you are on, the twrp will make some problems.
You gotta need the right firmware, which is v26. And everything will work just fine.
Thanks for your work olaf!
Thanks a lot! It works great, take your 5 stars, man!
I thank you very much for your appreciation of my work
It does not work for me either, I'm on FZ V26 Pro 20170830, the SP flash tool flashes it without any error in download only mode, but when trying to enter recovery it only boots to system, but TWRP 3.0.3.0 FZ_V24 works for me…dont know why
any ideas?
Works OK on FZ V26 Pro 20170830. Thanks !!!!!
I'm on FZ V26 Pro 20170830, I tried this version and the TWRP 3.0.3.0 FZ_V24 but still doesn't work for me, instead of going into TWRP it just boot normaly.
When I was on V12 Android 6.0 the TWRP (for that version) was working…
So how to TWRP for FZ V26 Pro 20170830?
First of all, You need to Install MediaTek Driver on your PC. you can follow link down below
https://androidjungles.com/ins.....b-vcom-drivers/
First of all, You need to Install MediaTek Driver on your PC. you can follow link down below
https://idevicehelp.net/instal.....b-vcom-drivers/
For More Visit iDeviceHelp.net
Not working. Tested on V26 : https://www.needrom.com/downlo.....000-pro-fz-v24/
It is working on the V26 ROM.
But there is a minor flaw in the description! That is probably where some of you go wrong. If you follow point 4 it will boot normal. Instead you need to change the default at the very small box on the left side from the screen. If you cannot read, you need the first line on top!
like I descibed below.
4. Enter recovery mode press volume up & power button, now switch with volume up to "boot in recovery" and then confirm by press volume down
I hope this will help.