DESCRIPTION

ROM STAR B94M/B943  – ROM Android 4.1.2

Update B943 20130304-180419 ( i dont know the changelog )

ROM Official : B943 20130302-190603 For platform MT6589

Language support: Multilang

Install ROM :

1.Brush system: new download good rom directly put on the sd card brush, do not need to boot into the system!
2.android system and data quick format (wipe)
3.Some advanced settings, such as removing the battery information.
4. Powerful U disk mount function
5.Turned off press Volume + and power button to enter.
6. System backup and restore all the data, including data
Note: Do not use the restore factory settings with the SD card installed, because he will empty your external SD card. .

or

To unpack Flash run Flash_tool.exe
Select a the in scatter……txt in Recovery
Click Flash_tool.exe interface Firmware-> Upgrade

Phone after taking the battery in put something
Connect the data cable
Brush finished with green circles appears

IF problem 3G: ( Unicom 3G )

B943/B94M Unicom 3G card when no signal, but China Unicom 2G card and mobile cards do not have this situation, because the factory is not written when 3G mode, so there will be this manufacturerto solve this problem, specific tutorial follows:

Install the tool, open the Writing Tools folder, click MauiMETA 3G ver 6.1216.0.msi installed, installed after the computer desktop will automatically create a shortcut, if Windows7 system, use the Run as Administrator software, a mouse right-click on the shortcut icon pop-up menu, select run as administrator, XP system directly double-click to open the can!

1. Open Tools, select Options — Conenectsmartphone into META mode

2. Reconnect, and then the phone off, remove the battery for 5 seconds and then loaded back Do not switch connected to a computer, connected for the first time need to install the driver, open the Device Manager, you can see an unrecognized hardware, the name of the CDC of Seria mouse Right-click on it and choose Update Driver, the installation was successful

3 installed drive, wait for the tool to display yellow, look at the picture below to select updata parameter:

4. The updata parameter is selected will pop up the following window, do not need to modify the

5. Select change NVRAM DB, select the database software

6. Select Load from file, select MX86.ini parameter file

7. Select Download to flash you can, As:

※Please make a backup of your device before installing or updating ROM