• Title: TWRP and Root for Leagoo Kiicaa Mix
  • Listed: 10/19/2017 2:57 pm
  • ROM Version: 7.0
  • You must be logged for ROM download.

Overall Rating : 3

3892 total views, 6 today

4 Total favorites


TWRP and Root for Leagoo Kiicaa Mix
TWRP and Root for Leagoo Kiicaa Mix - Image 1TWRP and Root for Leagoo Kiicaa Mix - Image 2

Author adMember Info



TWRP and Root for Leagoo Kiicaa Mix

This TWRP is Compatible only for Leagoo KIICAA Mix

For this guide, You need a Laptop or PC.

You need to Unlock Bootloader of your phone. 

 Connect your device via usb in fastboot mode and command as below..

Type this "fastboot oem unlock" then press enter.

Charge your phone to at least 70%.

Take a full Backup Your Device just in case if you need it later

To flash the TWRP recovery on Leagoo KIICAA Mix, you need SP Flash Tool installed on your Computer. Skip if you already have.

Find the Scatter File from the same TWRP zip file.

After install TWRP boot into recovery select language and press cancel and then format cache / dalvik cache and data. 

Download SuperSU.zip for root and Move it to internal memory on your phone

Thanks. :P


※Please make a backup of your device before installing or updating ROM

Donate with PayPal to hardikbhatia

15 Responses to“TWRP and Root for Leagoo Kiicaa Mix”

  1. 10/06/2017

    New Zealand

    Wow! Thankyou, your a life saver.

  2. 10/06/2017

    New Zealand

    Yup everything works great, kiicaa mix owners need to get this as I’ve tried installing by way of the instructions on the net and have failed every time until this version was uploaded. Remember the bootloader must be unlocked via fastboot first or the flashing won’t work, just unlocking oem in the settings won’t do it.

  3. 02/04/2016


    I had screen freezing with this version. There are 2 versions of TWRP available, each corresponding to their respective build. See https://4pda.ru/forum/index.ph.....0#entry65854307


  4. 08/15/2016


    i tried it twice, first i forgot to unlock bootloader, i got stuck to powered by android screen. 2nd attempt unlocked boot loader via adb,but then i was stuck again to the powered by android screen only this time it says orange state… wait for 5 sec to boot, then that was it. am i doing anything wrong with the steps above. need help pls

  5. 10/11/2015


    I have 20171019 (KIICAA_MIX_OS3.0_E_20171019) and this twrp DOES NOT work 

  6. 11/01/2016


     TWRP and Root for Leagoo Kiicaa Mix could post the link.


  7. 01/24/2018


    This twrp is not working, when turning on the phone in recorvery mode the twrp opens and freezes, making me unable to do anything

  8. rbarat


    Slovakia (SLOVAK Republic)

    It works, thank you.

  9. rbarat


    Slovakia (SLOVAK Republic)

    Installation Instructions:
    1. UnZIP archive with the program Flash Tool and throw it on the drive C. There also (on drive C) scatter file and recovery.img. Run the Flash_Tool.exe file as administrator (right click on the file -> run as administrator). If a warning appears that the Scatter file is not loaded, then just click OK to continue
    2. Before you open the program, click the Scatter-loading button in the right corner of the program window. A review window opens, go to drive C and select the scatter file MT6750_Android_scatter.txt
    3. Before proceeding, make sure that the phone is disconnected from the PC. After selecting the scatter file, the recovery tool should be loaded in the Flash Tool window, make sure that the check box is just opposite the RECOVERY section and nowhere else.
    4. Then, to transfer the program to the standby mode of the smartphone connection, click the Download button in the program window.
    After you clicked the Download button, connect the switched-off phone to the PC. Flash Tool will start the firmware of your recovery. Since we only flash the recovery partition, the firmware should take a few seconds. After the end of the firmware, a window with a green circle appears (if the firmware does not start, in 95% of cases, this is a problem with the drivers, that is, they are not stupidly installed.) If everything is fine with the drivers, then try to download a different version of the Flash Tool
    5. Once the firmware has completed, unplug the phone from the PC, but do not rush to turn it on.
    6. After installing custom recovery, take the phone still turned off and load it immediately into recovery mode. To do this, while the device is off, hold down the zoom button and the power button and hold this combination until the device boots into recovery mode (see for yourself)
    7. After you are in the recovery do the following:
    - Install zip
    - Choose zip archive SuperSU, which we copied to the device's memory earlier, install it
    - Reboot
    - System

  10. 08/22/2018


    need help for tutorial unlock bootloader

Leave a Reply

You must be logged in to post a comment.