- Title: Ulefone Power 6.0
- Listed: April, 2016
- Last modified: 11/14/2016 11:40 pm
- Version: ROM Android 6.0
You must be logged for ROM download.
40422 total views, 6 today
31 Total favorites
Member Info
DESCRIPTION
ROM Phone Ulefone Power - ROM Android 6.0
ONLY MT6753
Update Official ROM Ulefone Power version: T875d_GQ3026AF_Power_MM_20161114 – full_hct6753_65u_m0-user 6.0 MRA58K
t875d-gq-3026-63fgu-fhd-128g24g-bom6-m
——————————————————————————————————————————————————————————————-
Official ROM Ulefone Power version: T875d_GQ3026AF_Power_MM_20160912 – full_hct6753_65u_m0-user 6.0 MRA58K
t875d-gq-3026-63fgu-fhd-128g24g-bom6-m
Gapps include – No Rooted
Language support: Multilang
Install ROM:
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again (if the battery is removable)
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6753_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
※Please make a backup of your device before installing or updating ROM
Have anyone managed to install TWRP with new rom? I have been trying but no success. With SPFlashtool i get it flashed, but when I try to boot into recovery phone just reboots and then boots normally.
Same here
Is there a working TWRP recovery for 64 bit rom?
Works fingerprint??
Am I wrong or did fast charging stoped working?
Fingerprint works great.
PMT changed for the rom; it must be downloaded
????????????????????????
choose "firmware upgrade" in spf tool
Is the front face cam are working now? An how is the name of the phone in setting? Power or GQ3026AF?
In last update 04/27/2016 (Remember all people is Beta version!!!)
Works Fingerprint, Works led notification Red low Charge – Green Full charge. Blue led Blinks with missed calls and other notifications. Can´t change colors.
Don´t work Camera button for Open Camera – Sound Recorder. Works in Camera when its open.
Don´t work IR remote.
And how is the name in about the phone?
Dear users of Ulefone Power
We are sorry to tell you that we have to postpone the release of Android 6.0 final version for your phone 1 or 2 more weeks. But May 15 will be the deadline, no more delay.
The reason why we have to postpone is that we have encountered too many unexpected difficulties, but we are solving them one by one. In the latest ROM, we have completed the driver for fingerprint scanner and managed to upgrade it to 64-bit. Now only off-screen gestures and smart key is yet to be perfected. We have offered the updated ROM and flash guidance on onedrive for you to download. But as it is still not the final version, everything you doing with your phone you do on your own risk while the company is not taking responsibility for anything that may happen after flashing the ROM.
Very sorry for the delay, but we don’t want to release a half-functioning final version and then fix bugs OTA, since that will harm user experiences.
Dear cm125,
The version firmware works correctly, the aps works fine. I have a question. How can i use the folder with calibration? Because after upgrade me drop out gps. Thank you for info.
What’s about the “inline test” Akku drain?