• Listed: 09/03/2018 4:47 pm
  • ROM Version: Android 6.0 (Marshmallow)
  • You must be logged for ROM download.

Overall Rating : 3

1964 total views, 2 today



Author adMember Info

samin sikong



**Nubia M2 Lite Firmware ENCommon.v1.13
**Android 6.0 (Marshmallow)
**Gapps available
**Supported 3GB & 4GB models
**No root
**Source firmware: Dump from device via SPFLASHTOOL

**After unbricking your phone, your phone might be losing IMEI (NULL)
**Restore IMEI via MAUIMETA TOOL (use Nubia mddb files)
**Good Luck!


How to flash:

1. Install MT VCOM port driver first (choose wether your operating system under 32bits or 64 bits)-skipped if you already installed

2. Unpack FlashTools, and open on Flash_tool.exe (as admin)

3. "Scatter Loading": browser MT6750_Android_scatter.txt

4. "Select action": Download Only 

5. Press Download button and wait the bottom line be colored to show the loading entire files.

6. Turn off your phone  

7. Press “Download” button to start

8. Connect USB cable to the phone, Now while holding the volume down (-), then connect USB cable into pc/laptop's usb port 

9. Wait till Green Circle check mark will appeared

10. Now you may unplugged the phone from the computer and switch on


** To avoid unsuccessfull flashing, please do uncheck box "persist" & "metadata" (some people have problem).
** You may lose IMEI if proceed with format all instead of Download
** The first launch is always long! just wait patiently

※Please make a backup of your device before installing or updating ROM

32 Responses to“[UNBRICK]-ZTE NUBIA M2 LITE (NX573J)”

  1. 08/19/2018

    After unbrick my nubia m2 lite by mturk77 sptool rom. Now my nubia m2 lite little bit hanging sim not activating but sd card working fine and sometime touch working automatically and sometime nevigations key not working.
    Can your rom solve that problems.

    • samin sikong


      - My only advice to you, download official firmware.zip format from Nubia site. either v1.09, v1.11 or v1.13 (up to you)
      - Try to flashing via recovery: under MENU
      1) Goto Wipe Data> Wipe all applications,  Wipe Partition Cache, Wipe all data
      2) Go back to MENU, Choose Update Package>…browser from SDCARD (external- assumed you put it there)
      3) Install it follow on screen instructions

      ps: do make a backup for important data.


  2. 08/19/2018

    Is it a new rom or else mturk77 sptool rom.

    • samin sikong



      **Nubia M2 Lite Firmware ENCommon.v1.13
      **Android 6.0 (Marshmallow)
      **Gapps available
      **Supported 3GB & 4GB models
      **No root
      **Source firmware: Dump from device via SPFLASHTOOL

  3. 08/19/2018

    This is my Nubia Build number
    Is it updated rom.

    • samin sikong


      *** This firmware based on last Nubia Build NX573J_ENCommon_V1.13 (Non-chinese rom)
      *** The only purpose, to revive dead phone & System damage.

      ps: to be sure you didn't find any higher than Nubia Build NX573J_ENCommon_v1.13 at this moment

  4. 08/19/2018

    I thing ENCommon_V1.13 is installed in my device.

  5. 08/19/2018

    So what can I do now.

  6. 08/19/2018

    What you thing why my Nubia m2 lite going hanging,Sim not activating, Touch working automatically, Navigation back and recent button working automatically, Accessibility turn off automatically. Why? Do you have any solutions.

    • samin sikong


      You are losing IMEI's. so SIM not working (*#06#) might be NULL.
      Restore with new update nvram & nvdata_via spflashtool. Give it a try.

  7. samin sikong


    ***This is also could restore IMEIs (worth to try)
    ***Inside my firmware included Nvram and Nvdata


  8. 08/19/2018

    I will flash it later and then I knowing you.

  9. 09/05/2018


    Besides my imei, my network was deactivated too, how can I fix that issue?

  10. 09/05/2018


    Thanks mate, because my sim is active now (after 3-4 trying

Leave a Reply

You must be logged in to post a comment.