- Title: [UNBRICK]-ZTE NUBIA M2 LITE (NX573J)
- Listed: September, 2018
- Last modified: 09/03/2018 4:47 pm
- Version: Android 6.0 (Marshmallow)
You must be logged for ROM download.
13974 total views, 4 today
![[UNBRICK]-ZTE NUBIA M2 LITE (NX573J)](https://cdn.needrom.com/wp-content/uploads/2018/09/157147-500x437.jpg "[UNBRICK]-ZTE NUBIA M2 LITE (NX573J)")
Member Info
DESCRIPTION
Details:
——–
**Nubia M2 Lite Firmware ENCommon.v1.13
**Android 6.0 (Marshmallow)
**Gapps available
**Supported 3GB & 4GB models
**No root
**Source firmware: Dump from device via SPFLASHTOOL
Attention:
————
**After unbricking your phone, your phone might be losing IMEI (NULL)
**Restore IMEI via MAUIMETA TOOL (use Nubia mddb files)
**Good Luck!
How to flash:
————-
1. Install MT VCOM port driver first (choose wether your operating system under 32bits or 64 bits)-skipped if you already installed
2. Unpack FlashTools, and open on Flash_tool.exe (as admin)
3. "Scatter Loading": browser MT6750_Android_scatter.txt
4. "Select action": Download Only
5. Press Download button and wait the bottom line be colored to show the loading entire files.
6. Turn off your phone
7. Press “Download” button to start
8. Connect USB cable to the phone, Now while holding the volume down (-), then connect USB cable into pc/laptop's usb port
9. Wait till Green Circle check mark will appeared
10. Now you may unplugged the phone from the computer and switch on
Done!
ps:
** To avoid unsuccessfull flashing, please do uncheck box "persist" & "metadata" (some people have problem).
** You may lose IMEI if proceed with format all instead of Download
** The first launch is always long! just wait patiently
※Please make a backup of your device before installing or updating ROM
Hi
After unbrick my nubia m2 lite by mturk77 sptool rom. Now my nubia m2 lite little bit hanging sim not activating but sd card working fine and sometime touch working automatically and sometime nevigations key not working.
Can your rom solve that problems.
- My only advice to you, download official firmware.zip format from Nubia site. either v1.09, v1.11 or v1.13 (up to you)
- Try to flashing via recovery: under MENU
1) Goto Wipe Data> Wipe all applications, Wipe Partition Cache, Wipe all data
2) Go back to MENU, Choose Update Package>…browser from SDCARD (external- assumed you put it there)
3) Install it follow on screen instructions
ps: do make a backup for important data.
Is it a new rom or else mturk77 sptool rom.
Details:
——–
**Nubia M2 Lite Firmware ENCommon.v1.13
**Android 6.0 (Marshmallow)
**Gapps available
**Supported 3GB & 4GB models
**No root
**Source firmware: Dump from device via SPFLASHTOOL
This is my Nubia Build number
NX573J_ENCommon_V1.13
Is it updated rom.
*** This firmware based on last Nubia Build NX573J_ENCommon_V1.13 (Non-chinese rom)
*** The only purpose, to revive dead phone & System damage.
ps: to be sure you didn't find any higher than Nubia Build NX573J_ENCommon_v1.13 at this moment
I thing ENCommon_V1.13 is installed in my device.
So what can I do now.
What you thing why my Nubia m2 lite going hanging,Sim not activating, Touch working automatically, Navigation back and recent button working automatically, Accessibility turn off automatically. Why? Do you have any solutions.
You are losing IMEI's. so SIM not working (*#06#) might be NULL.
Restore with new update nvram & nvdata_via spflashtool. Give it a try.
***This is also could restore IMEIs (worth to try)
***Inside my firmware included Nvram and Nvdata
https://www.youtube.com/watch?.....v=Woa0Y9mPKRk
Already made the files & ready to flash (let me know if you made it)
I will flash it later and then I knowing you.
Alright.
[RESTORE IMEI] – ZTE NUBIA M2 LITE (NX573J).rar <<<<
Besides my imei, my network was deactivated too, how can I fix that issue?
Thanks mate, because my sim is active now (after 3-4 trying
Restore IMEI via MAUI META TOOL
https://www.youtube.com/watch?.....v=D2JH9SebPJ8