DESCRIPTION

Recovery Phone Unihertz Jelly 2  - TWRP 3.5.2

Flash Recovery:

Step 1: Enable USB Debugging on Your Phone
Step 2: Download the Recovery
Step 3: Reboot Into Your Bootloader
Step 4: Flash Recovery to Your Phone
- Once in bootloader mode, connect your phone to your PC with a USB cable. Your phone should indicate that the device is connected.
- On your computer, open the folder in which you’ve installed ADB, and Shift+Right Click on an empty area.
- Choose “Open a Command Prompt Here”. Then, run the following command:
 - fastboot devices
 - fastboot flash recovery recovery.img
Step 5: Boot Into Recovery

※Please make a backup of your device before installing or updating ROM