- Title: ZOPO ZP980+
- Listed: February, 2014
- Last modified: 02/23/2014 6:33 am
- Version: ROM Android 4.2.2
You must be logged for ROM download.
22632 total views, 2 today
1 Total favorites
Member Info
DESCRIPTION
ROM Phone ZOPO ZP980+ – ROM Android 4.2.2
ONLY MT6592
ROM Official ZOPO ZP980+ version: ZP980+ 20140219-130741
Gapps include – No Rooted
Language support: MultiLang
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
※Please make a backup of your device before installing or updating ROM
Hello,
what's the difference between this rom and the old "ZP980+ 20140106-173019"?
I see no differences after 2 days.
But, i have the same problem with de battery gauge, she stays at 100% too long time.
When i remove and replace the battery, then the percentage is correct.
Same problem for U??
Thanks for answers
stop worrying about battery %. It means nothing. Nearly all phones have SOME sort of battery quarks. Sometimes it's % rapidly going down in the lower %. Sometimes it's sticking on a single % for a long time. % is just an estimation. Don't spend another second worrying about it. On screen time and battery juice used while deep sleep are the most important factors. Will be doing on screen time tests later this evening.
Hello,
i think that it's not normal that my battery gauge stay at 100% during 3 hours, and after remove and replace it, the phone shows 85% !!!!!!!
I don't think that it's a battery problem, but a calculation problem…
@fabriziolecce:
try wipe dalvik and reset factory, again flash stock firmware, again factory reset… it must worked…
@maros306604
Thanks!
HOW TO ROOT ==> http://forum.zopomobileshop.co.....d-1871-1-1.html
thank you.
Works in Zp980?
After 2 weeks this rom seems to work fine.
Only one "problem" : camera resolution still at 9,5MP maximum instead of 14MP.
9.5mp for 4/3 and 14mp for full screen
Is the OS with white background and black fonts or vice versa? White background causes lotsa eye strain.
error (4032) S_FT_ENABLE_DRAM_FAIL