DESCRIPTION

ROM Mobile ZTE Axon 10 Pro 5G 10 – ROM Android 10

ONLY SM8150

ROM 2 – Official ZTE Axon 10 Pro 5G Version: GEN_EU_EEA_P855A01 – 421950B1551MyOS11.3.6_A2020GPro_EEA – 10 QKQ1.200815.002

Gapps include – No Rooted

Language support: Multilang

Install ROM:

OTA

1.copy ****.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again
3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.
4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose“apply update from sdcard”
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
9.Choose “reboot system now”,then press volume+ button to reboot your phone.

ROM 1 – Official ZTE Axon 10 Pro 5G Version: GEN_CN_P855A02 – P855A02V2.2.0B21 – 10 QKQ1.200815.002

Gapps not include – No Rooted

Language support: EN/CN

Install ROM:

1.Connect your phone to PC and let the driver install
2.Install QPST
3.Open QPST Configuration -> Add new port -> Select the com port of your device -> exit
4.Go to Start -> All Programs -> QPST eMMC Software Download open the tool -> Check program boot loaders -> Browse for the device com port
5.Click Load XML def and browse for rawprogram0.xml in folder ROM
6.Click Load Patch def and browse for patch0.xml in folder ROM
7.Check the search path 2 and browse for the folder ROM
8.Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important)
and it will search for the new hardware found, install the driver

※Please make a backup of your device before installing or updating ROM