DESCRIPTION

ROM Mobile ZTE Blade A3 2020 – ROM Android 9.0

ONLY SC9832e

ROM 3 – Official ZTE Blade A3 2020 Version: GEN_GLB_A3_2020_V1.3 – GEN_GLB_P932F50V1.0.0B16 – sp9832e_1h10_gofu-user 9 PPR1.180610.011 - Flash

ROM 6 – Official ZTE Blade A3 2020 Version: PV_ZTE_RU_P932F50V1.0.0B09 – sp9832e_1h10_gofu-user 9 PPR1.180610.011 - Flash

ROM 5 – Official ZTE Blade A3 2020 Version: GEN_UA_A3_2020_V1.2 – GEN_UA_P932F50V1.0.0B08 – sp9832e_1h10_gofu-user 9 PPR1.180610.011 - Flash

ROM 4 – Official ZTE Blade A3 2020 Version: GEN_EU_EEA_A3_2020_V1.4 – GEN_EU_EEA_P932F50V1.0.0B10 – sp9832e_1h10_gofu-user 9 PPR1.180610.011 - Flash

ROM 3 – Official ZTE Blade A3 2020 Version: GEN_GLB_A3_2020_V1.2 – GEN_GLB_P932F50V1.0.0B11 – sp9832e_1h10_gofu-user 9 PPR1.180610.011 - Flash

ROM 2 – Official ZTE Blade A3 2020 Version: FLOW_JM_A3_2020_V1.1 – LLA_LA_P932F50V1.0.0B07 – sp9832e_1h10_gofu-user 9 PPR1.180610.011 – Flash

Install ROM:

FactoryDownload/UpgradeDownload/ResearchDownload

1 Unpack ROM and extract xxxxxxxxxxxxxxxxxxxxxxxxxxx.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet" and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish

ROM 1 – Official ZTE Blade A3 2020 Version: GEN_RU_1_A3_2020_V1.1 NFC – sp9832e_1h10_gofu-user 9 PPR1.180610.011 – OTA

Gapps include – No Rooted

Language support: Multilang

Install ROM:

OTA

1.copy ****.zip to root folder of the phone SD card (no need to unzip).
2.Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again
3.Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.
4.Choose “yes—delete all user data”, then press volume+ button to enter the page as below.
5.It will enter below page after finishing delete all user data.
6.Then choose“apply update from sdcard”
7.Find and select the ROM, press volume+ to enter the page as below.
8.Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
9.Choose “reboot system now”,then press volume+ button to reboot your phone.

※Please make a backup of your device before installing or updating ROM