• Title: Cherry Flare S3 Power
  • Listed: 12/19/2015 12:47 am
  • ROM Version:ROM Android 5.1
  • You must be logged for ROM download.

Overall Rating : 16

10916 total views, 3 today

12 Total favorites


Cherry Flare S3 Power

Author adMember Info


  • Listed by: SoCr@Te
  • Member Since: 05/15/0470


ROM PhoneCherry Mobile Flare S3 Power - ROM Android 5.1


Update OfficialROM Cherry Mobile Flare S3 Power version: Cherry Flare S3 Power Lollipop Update 11282015 –full_techain6592_wet_l-user 5.1 LMY47I


Official ROM Cherry Mobile Flare S3 Power version: Cherry Flare S3 Power Lollipop SW04 08252015 –full_techain6592_wet_l-user 5.1 LMY47I

Gapps include –No Rooted

Language support: Multilang


Install ROM:

Install with SP MDT:

1). Turn off the smartphone. Cable is not connected to the computer.

2). Remove the battery and insert it again

3). Connect your phone to a computer cable. The operating system detects a new device

4). Disconnect the cable from the computer.

5). Run SPMultiPortFlashDownloadProject.exe

6). Choose File>Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

7). Click Scatter File and select the MT6592_Android_scatter.txt file (it's in the folder with the rom).

8). Click "Start all".

9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,

 remove and insert the battery (if the battery is removable) and reconnect it to the computer.

10). After (OK) click Stop and disable any phone.

11). Completed.

Share Button

※Please make a backup of your device before installing or updating ROM

68 Responses to“Cherry Flare S3 Power”

  1. 12/11/2015
    Posts: 1

    tnx sa rom. Ginamit ko siya sa Cherry mobile cubix cube 2 ko at nagwork siya. Iba na nga lng yung menu interface niya. Nag-error kac yung inaapdate kong software para sa cubix cube at di na natapos yung installation, kaya ininstall ko ito using ADB Sideload


  2. 12/12/2015
    Posts: 1

    Hmm? di na po ba kailangan nito ng USB Drivers? Tanung ko lang po. ang pagkakaintindi ko po kasi dun sa guide eh ung SPMDT eh SPFT na sha for MTK na nakakabasa na ng kahit anung MTK device? Tanung ko lang po. dahil kung kailangan naman po eh makakapag DL po ako ng MTK_Usb_Drivers. TY po. :) #Fs3pUSER

  3. 12/25/2015
    Posts: 4

    ang hirap nman e flash nito sir , not working!!full tutorial plss,,,


  4. 11/20/2015
    Posts: 1

    use SPFT 5.13 or 5.15  working…


  5. 12/30/2015
    Posts: 1

    Guys, may idea kayo pano ma root ang phone na to?

  6. 12/25/2015
    Posts: 4

    Working thanks , i really enjoyed the rom..thanks no bugs at all!!!

  7. 01/02/2016
    Posts: 2


  8. 12/25/2015
    Posts: 4

    rooted na aq at ctr na recovery q

  9. 01/02/2016
    Posts: 2

    panu iinstall to sa phone anung tools


  10. 03/18/2014
    Posts: 4

     thanks for this.. I revived my totally dead boot fs3p( no power, no bootloop, wont charge, corrupted preloader) using this method..

    to those having problem following this guide,

    1. just download SPMDT (uploaded on top) and Cherry Mobile Flare S3 Power(not the updated because of corruption issue when i downloaded it twice)

    2. open SPMPDT and click scatter (select scatter loading file on the CMFS3P firmware folder)

    3. tick TYPE (right part of the tool) select format and download all

    4. grab a precision screw for opening ur fs3p because our phone is non removable battery and the tool is requiring to remove battery to start the operation.

    5. remove the connection of ur fs3p battery connection to the board

    6. connect ur USB cord to ur phone connected to the PC usb (note: make sure you downloaded and install the correct drivers of fs3p in order to detect by ur PC)

    7. tick SCAN (from the SPMPDT tool)

    8. now reconnect the battery connection to the board (then the tool starts recognizing the phone and starts verifying the data from the scatter file)

    9. after the tool recognizing the connection from ur pc to phone, the tool is prompting for start

    10. i tried to power up phone but it doesnt respond so that I tried to remove the battery connection to board. and finally the tool responds and I see a progress bar running until it is done (says OK), remove the connection from PC to ur phone.

    YES..! its booted up.. fixed the dead boot..


Leave a Reply

You must be logged in to post a comment.