- Title: Cuasar version 2
- Listed: July, 2015
- Last modified: 08/01/2015 2:08 pm
- Version: VIBEUI V2.0 1437 7.3.1
You must be logged for ROM download.
21752 total views, 3 today
4 Total favorites
Member Info
DESCRIPTION
Roms 2.0 and 2.1
UPDATE 1
Make a backup of the system ROM if it were not supported by your terminal. It can be done with MtkDroidTools
Make a backup of the IMEI with MtkDroidTools before making Flash
Adding this Mtkdroidtools for you can reinstall the IMEI and you can backup the IMEI.
Installation roms 2.0 and 2.1:
!!!I recommend backing up the nvram with Mtkdroidtools before using Spflashtool to keep the imei, otherwise there would then insert the end of the process once the terminal with the new rom rebooted.!!!!
-Donwload and unpacking S660 CUASAR version 2.0.rar
-Off the phone and remove the battery
-Run SP_Flash_Tool and selected MT6582_Android_scatter.txt on rom directory
-Download press release o download/firmware
-Connect phone without battery
-When the green circle appears the battery and turn on the phone.
-When I start properly, shut down again and go into recovery mode (rom 2.0 pressing “Power” then”Volume +” ) (rom 2.1 pressing “power” then “power + and power -”) and select boot recovery.
Select “Wipe data / factory reset” and run
Select “Wipe cache partition” and run
select “Advanced” and then “Wipe Dalvik Cache” and run
Select “Back” and run
Select “reboot system now” Program
- And wait for it to restart, you can restart several times. It takes a while.
And if all goes well will be all set.
If you give the proximity sensor problems only you have to download “S660 CUASAR version 2.1” unzip files and change the ROM before flashing with SPflashtools.
This ROM has been tested on a Chinese version terminal S660 and it worked all components.
※Please make a backup of your device before installing or updating ROM
Download eror
link refresh page
solved
up version 2.1
lk image incorrect what can i do,,,,,plz help
Rom stopped on the logo how to fix
you'll have to enter Recovery (rom 2.0: volume + and power) mode, press and slide to WIPE Swipe to Factory Reset and once finished Wipe Dalvik Cache.
Can i directly flash version 2.1 without flash version 2.0.
Coz i think version 2.1 is latest is it.
You can install version 2.1 directly, no need to pre-install version 2.0. The two versions are the same Vibe 2.0.I’ve changed is the Kernel to resolve incompatibilities with the proximity sensor in some terminals.
CUASAR ..can you plz upload the Lollipop ROM
Hello Friend. do not worry I’ll upload soon lillipop 5.0 but for now there are some bugs to be polished.
Flashed it on ROW model, works great. Flashed version 2.1 since with the first CUASAR I had a proximity sensor problem
I get this error message when i press download in flash tool "pmt changed for the rom it must be downloaded".
I have CN terminal… what is the problem?
You must Select “Update Firmware” or “format all + Download”. ROM is different and each partition is changed and therefore fails
Flashed v2.1 on ROW model.
Stuck on the Lenovo bootscreen!!
if this is hung on startup because you have to enter Recovery and Factory reset