Responses to “Irulu W1005”

1. 

   06/21/2020
   

    

   flyerdie on 06/24/2020 @ 10:31 pm

   This is how looks like with the modifications:

    

   @echo off
   @rem  This script is called by x:\Windows\System32\Startnet.cmd – WinPE
   @echo.
   @echo.
   @echo.
   @echo Running Intel Optimization powercfg for improved imaging times
   @echo.
   @echo call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
   call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
   @echo.
   @echo.
   @rem
   @rem This is the default product key being used:
   set productkey=37GNV-YCQVD-38XP9-T848R-FC2HD
   @rem
   @rem Home/Core:           37GNV-YCQVD-38XP9-T848R-FC2HD
   @rem Pro:                 NF6HC-QH89W-F8WYV-WWXV4-WFG6P
   @rem Enterprise:          GN7FR-4QK4T-8XPDY-P2RYF-QGP4G

   @echo.
   @rem  *****************************************************************
   @rem  List all the disks, then search the volumes of each one to see 
   @rem  which disks may have "Winpe" in the label. We will ignore that 
   @rem  disk and use the first disk without the Winpe label that we find. 
   @rem  *****************************************************************
   @echo.>x:\listdisk.txt
   @echo list disk>>x:\listdisk.txt
   @echo exit>>x:\listdisk.txt
   echo x:\listdisk.txt
   @echo call diskpart /s x:\listdisk.txt
   call diskpart /s x:\listdisk.txt>x:\Disks.txt
   @echo.
   @rem Set Disk equal to blank to start
   set disk=
   @echo.
   @rem 
   @rem  This line will write a diskpart script to select the disk and detail it's contents.
   @rem  We use this output to find a disk that does NOT have Winpe as the volume label.
   @rem  That disk will have the OS installed to it. This way you can exclude USB from diskpart.
   @rem  
   @rem  This works around the issue where the USB key is sometimes enumerated as disk 0 and the 
   @rem  SSD is disk 1. 
   @rem  
   for /f "skip=8 tokens=2" %%A in (x:\Disks.txt) do (
   @echo sel disk %%A>x:\Par.txt
   @echo det disk>>x:\Par.txt
   @echo exit>>x:\Par.txt
   if NOT "%%A"=="DiskPart…" call :ListPar %%A
   )
   if "%Disk%"=="" echo No disk found without a volume label of "Winpe"&& set disk=0
   @echo Using Disk "%Disk%"
   @echo.
   @echo.
   @echo.
   @rem  *****************************************************************
   @rem    Detect if System is booted into UEFI mode or Bios mode 
   @rem  *****************************************************************
   for /f "tokens=2* delims= " %%A in ('reg query HKLM\System\CurrentControlSet\Control /v PEFirmwareType') do set Firmware=%%B
   @echo.
   if %Firmware%==0×1 goto :Biosmode
   if %Firmware%==0×2 goto :UEFImode
   Goto :END
   :UEFImode
   @echo.
   @rem ************************
   @rem UEFI SECTION
   @rem ************************
   @echo The PC is booted in UEFI mode
   @echo.>x:\winpart.txt
   @echo select disk "%Disk%">>x:\winpart.txt
   @echo clean>>x:\winpart.txt
   @echo convert gpt>>x:\winpart.txt
   @echo create partition efi size=100>>x:\winpart.txt
   @echo format quick fs=fat32 label="System">>x:\winpart.txt
   @echo assign letter="S">>x:\winpart.txt
   @echo create partition msr size=16>>x:\winpart.txt
   @echo create partition primary>>x:\winpart.txt
   @echo format quick fs=ntfs label="Windows">>x:\winpart.txt
   @echo assign letter="W">>x:\winpart.txt
   @echo shrink desired=800>>x:\winpart.txt
   @echo create partition primary>>x:\winpart.txt
   @echo format quick fs=ntfs label="Recovery">>x:\winpart.txt
   @echo assign letter="R">>x:\winpart.txt
   @echo set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac">>x:\winpart.txt
   @echo gpt attributes=0×8000000000000001>>x:\winpart.txt
   @echo exit>>x:\WinPart.txt
   Goto :WINPARTSECTION

   :Biosmode
   @rem ************************
   @rem BIOS SECTION
   @rem ************************
   @echo The PC is booted in BIOS mode
   @echo The PC is booted in BIOS mode>x:\Bios.txt
   @echo.>x:\winpart.txt
   @echo select disk "%Disk%">>x:\winpart.txt
   @echo clean>>x:\winpart.txt
   @echo create partition primary size=100>>x:\winpart.txt
   @echo active>>x:\winpart.txt
   @echo format quick fs=fat32 label="System">>x:\winpart.txt
   @echo assign letter="S">>x:\winpart.txt
   @echo create partition primary>>x:\winpart.txt
   @echo format quick fs=ntfs label="Windows">>x:\winpart.txt
   @echo assign letter="W">>x:\winpart.txt
   @echo exit>>x:\winpart.txt
   @echo.

   :WINPARTSECTION
   @echo Winpart.txt now contains…..
   @echo.
   type x:\winpart.txt
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Setting up the partition table
   @echo *****************************************************************
   @echo call diskpart /s x:\winpart.txt
   diskpart /s %InstallPath%\wimpart.txt
   @echo.
   @echo.
   @echo *****************************************************************
   @rem  Map drive letter for Install.wim
   @echo *****************************************************************
   @echo.>x:\ListVol.txt
   @echo List volume>>x:\ListVol.txt
   @echo exit>>x:\ListVol.txt
   @echo call diskpart /s x:\ListVol.txt
   diskpart /s %WinPESource%ListVol.txt>%WinPESource%Output.txt
   @echo.
   @echo.
   @rem Go through each drive letter, looking for the images\Install.txt file
   for /f "skip=8 tokens=3" %%A in (%WinPESource%Output.txt) do (if exist %%A:\images\install.txt set InstallPath=%%A:\images)
   @echo.
   @echo.
   @rem Check InstallPath was found and there are images in it.
   if NOT EXIST %InstallPath%\Install.wim echo "Install.wim NOT found." && goto :Error
   @echo Install.wim FOUND at %InstallPath%\images\install.wim
   @echo.
   @echo.
   @echo Making directories…
   if NOT EXIST %InstallPath%\Winre.wim echo "Winre.wim NOT found." && goto :Error
   md w:\recycler\scratch
   if %errorlevel% NEQ 0 echo "Failed to make w:\recycler\scratch directory" && goto :error
   @echo.
   md r:\recovery\windowsre
   if %errorlevel% NEQ 0 echo "Failed to make m:\recovery\windowsre directory" && goto :error
   @echo.
   @echo *****************************************************************
   @echo  Applying the Windows image from the USB
   @echo *****************************************************************
   @echo call DISM /Apply-Image /ImageFile:%InstallPath%\install.wim /Index:1  /ApplyDir:w:\ /Compact /ScratchDir:w:\recycler\SCRATCH
   call DISM /Apply-Image /ImageFile:%InstallPath%\install.wim /Index:1 /ApplyDir:w:\ /Compact /ScratchDir:w:\recycler\SCRATCH
   if %errorlevel% NEQ 0 echo "Failed to apply image to w:" && goto :error
   @echo.
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Add default product key
   @echo *****************************************************************
   @echo call DISM /Image:w: /Set-ProductKey:%productkey% 
   call DISM /Image:w: /Set-ProductKey:%productkey%
   if %errorlevel% NEQ 0 echo "Failed to set productkey." && goto :error
   @echo.
   @echo.
   @echo.
   @echo *****************************************************************
   @rem  Move WinRE to Recovery Partition
   @echo *****************************************************************
   @echo.
   @echo Modifying attributes of winre.wim so we can move it.
   attrib w:\Windows\System32\recovery\winre.wim -s -h -a -r
   @echo move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre
   move w:\Windows\System32\recovery\winre.wim r:\recovery\windowsre
   if %errorlevel% NEQ 0 echo "Failed to move winre.wim to r:\recovery\windowsre" && goto :error
   @echo.
   @echo reset attributes now
   attrib r:\Recovery\Windowsre\winre.wim +s +h +a +r
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Setting the boot environment
   @echo *****************************************************************
   @echo call w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all
   w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all
   if %errorlevel% NEQ 0 echo "Failed to set boot information" && goto :error
   @echo.
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Setting the recovery environment
   @echo *****************************************************************
   @echo w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows
   w:\windows\system32\reagentc /SetREImage /Path r:\RECOVERY\WINDOWSRE /target w:\windows
   if %errorlevel% NEQ 0 echo "Failed to set recovery information" && goto :error
   @echo.
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Copying over Unattend.xml to use on factory floor if it exists
   @echo *****************************************************************
   @echo if EXIST %WinPESource%Scripts\Unattend.xml copy %WinPESource%Scripts\Unattend.xml w:\Windows\Panther /y
   if EXIST %WinPESource%Scripts\Unattend.xml copy %WinPESource%Scripts\Unattend.xml w:\Windows\Panther /y
   @echo.
   @echo *****************************************************************
   @echo  Copying over NON Scanstate Packages, if they exist.
   @echo  IF YOU COPY OVER SCANSTATE PPKG, THIS CAUSE IMAGE TO FAIL DURING RECOVERY
   @echo *****************************************************************
   @echo if EXIST %WinPESource%Scripts\*.ppkg copy %WinPESource%Scripts\*.ppkg r:\Recovery\Customizations /y
   if EXIST %WinPESource%Scripts\*.ppkg copy %WinPESource%Scripts\*.ppkg r:\Recovery\Customizations /y
   @echo.
   @echo *****************************************************************
   @echo  Copying over resetconfig.xml and assets, if they exist.
   @echo *****************************************************************
   @echo if EXIST %WinPESource%Scripts\Recovery\OEM\resetconfig.xml xcopy %WinPESource%Scripts\Recovery\*.* w:\Recovery /e /y
   if EXIST %WinPESource%Scripts\Recovery\OEM\resetconfig.xml xcopy %WinPESource%Scripts\Recovery\*.* w:\Recovery /e /y
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Copying over resetconfig.xml and assets, if they exist.
   @echo *****************************************************************
   @echo if EXIST %WinPESource%Scripts\LayoutModification.xml copy %WinPESource%Scripts\LayoutModification.xml w:\users\default\appdata\local\Microsoft\Windows\Shell\ /y
   if EXIST %WinPESource%Scripts\LayoutModification.xml copy %WinPESource%Scripts\LayoutModification.xml w:\users\default\appdata\local\Microsoft\Windows\Shell\ /y
   @echo.
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Copying over oobe.xml.
   @echo *****************************************************************
   @echo xcopy %WinPESource%Scripts\Recovery\OEM\Scripts\oobexml\Oobe\*.* w:\Windows\System32\oobe\ /e /y
   xcopy %WinPESource%Scripts\Recovery\OEM\Scripts\oobexml\Oobe\*.* w:\Windows\System32\oobe\ /e /y
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Copy over Test tools to \TEST_TOOL
   @echo  \TEST_TOOL  SHOULD BE DELETED PRIOR TO SHIPPING
   @echo *****************************************************************
   @echo %WinpeSource%Scripts\7za.exe x w:\TEST_TOOL.zip -oW:\
   %WinpeSource%Scripts\7za.exe x  %WinpeSource%TEST_TOOL.zip -oW:\
   if %errorlevel% NEQ 0 echo "Error when run %WinpeSource%Scripts\7za.exe x  w:\TEST_TOOL.zip" && goto :error
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Copy over Cleanup.cmd link to desktop
   @echo *****************************************************************
   if EXIST %WinPESource%Scripts\Cleanup.cmd copy %WinPESource%Scripts\Cleanup.cmd w:\Users\Administrator\Desktop /y
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Copy over Customer_Test.cmd link to desktop
   @echo *****************************************************************
   if EXIST %WinPESource%Scripts\Customer_Test.cmd copy %WinPESource%Scripts\Customer_Test.cmd w:\Users\Administrator\Desktop /y
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Copy over SMT_Shutdown.cmd link to desktop
   @echo *****************************************************************
   if EXIST %WinPESource%Scripts\SMT_Shutdown.cmd copy %WinPESource%Scripts\SMT_Shutdown.cmd w:\Users\Administrator\Desktop /y
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Copy over SMT_TEST.cmd link to desktop
   @echo *****************************************************************
   if EXIST %WinPESource%Scripts\SMT_TEST.cmd copy %WinPESource%Scripts\SMT_TEST.cmd w:\Users\Administrator\Desktop /y
   @echo.
   @echo.
   @echo *****************************************************************
   @echo  Image deployment COMPLETE. Type EXIT from Command
   @echo  Prompt to restart or turn off device.
   @echo *****************************************************************
   goto :END

   :ERROR
   @echo.
   @echo An error has been detected.
   @echo. 
   goto :END

   :ListPar
   @REM This section is to bring a disk number and use it to List Partitions
   @echo.
   set TempDisk=%1
   diskpart /s x:\Par.txt>x:\ParOutput.txt
   for /f "skip=26 tokens=4" %%A in (x:\ParOutput.txt) do (
   if /i NOT "%%A"=="Winpe" set Disk=%TempDisk%
   )
   Goto :EOF

   :END
   @rem 
   @rem  Get finish time so we can evaluate total WinPE phase time.
   @rem
   call |time>x:\StopTime.txt
   @rem
   @rem  Now parse both files to display the Start and Finish Time
   @rem
   @echo.
   @echo.
   for /f "tokens=5" %%A in (x:\starttime.txt) do echo Script Start Time is %%A
   for /f "tokens=5" %%A in (x:\stoptime.txt) do echo  Script Stop Time is %%A
   @echo.

   Log in to reply.