- Title: KitKat 4.4.2 980/990
- Listed: September, 2014
- Last modified: 10/09/2014 5:40 pm
- Version: 1.0.7
You must be logged for ROM download.
172637 total views, 42 today
394 Total favorites
Member Info
DESCRIPTION
Hi all 
This is the first REAL kitkat rom for zopo 980/990, is entirely (kernel and android) compiled by me from mediatek source
everythings works, only some minor bug are present…but it's only the first public release
changelog:
09/10 – Ver 1.0.7
- Wifi Tweak (little improved speed and stability)
- Flash sync tweak
- Front camera up to 8MPX in Third-party app (only 3MPX in stock camera app)
- Radio FM app now works without headphone
- AROMA: mod for remove reboot option in powermenu
- AROMA: mod for install a new boot logo by aquilacd70
- AROMA: mod for switch back to use Superuser instead of Kinguser
02/10 Ver 1.0.6_new
- changed some commands in flash script, if you are unable to flash the 1.0.6 try with this new version
01/10 – Ver 1.0.6
- root : switched from superuser app to kinguser app
- vendor lib: updated the precompiled vendor lib
- wifi: different firmware files
- wifi: tweak some power parameters
- display: now in aroma you can select the display resolution (FullHD or HD). the HD resolution is nice for boost graphical speed in games
- kernel : fix for working softkey in HD resolution
some info about resolution HD and FULLHD
in the version 1.0.6 i have created a script for set the display resolution (and DPI) in HD or FULLHD.
HD resolution help a lots in games.
to change the resolution during the flash just activate (or deactivate) the option in aroma, enable if you want to use the HD resolution, disable if you want to use the FullHD.
every time you want to change the resolution just flash the rom with the option you want (you need flash because it is necessary to change the kernel depending on the resolution chosen)
There are 2 little problems:
- the first boot after changing the resolution (only the first time) there may be icons with wrong size (too big or too small) in the status bar and launcher, just reboot for fix
- at HD resolution the boot animation is correct, but a few seconds before completing the boot becomes huge, it's just a visual bug
27/09 – Ver 1.0.5
- Tweaks Compass driver and settings
- Tweaks Autobrightness settings
- Increased microphone volume in call
- Increased speaker volume in call
- ZOPO990/C7: alternative kernel with different proximity sensor driver (for those not working with the base kernel)
- Added Bulgarian language
- Added Greek language
- Added Finnish language
23/09 – Ver 1.0.4_new
- Fix color grey in dialog windows
22/09 – Ver 1.0.4
- Fix camera flash sync (maybe it is not perfect yet but it is better than before)
- Added reboot and reboot recovery in power menu (thanks to dimid)
- Added torch app (thanks to dimid)
- new charging led color rules: 0-99->red, 100->green
- AROMA: add a new baseband (2014) if someone wants to try it
- Added Japanese language
20/09 – Ver 1.0.3
- Fix cell low signal strength
- Kernel : different compass driver
- Added Swedish language
- Added Polish language
- Added Slovak language
- Added Slovenian language
15/09 – Ver 1.0.2
- kernel : fix automatic backlight level value steps
- rom: tweak some automatic backlight settings
- rom: fix backlight smooth transition
- rom: fix write permission on external sdcard for some app
- rom: added Google TTS and chrome bookmark sync
- rom browser: set default download directory to "Download"
- ZOPO980/C2: alternative kernel with different proximity sensor driver (for those not working with the base kernel)
11/09 – Ver 1.0.1
- ZOPO980/C2 and C3 – fix accellerometer and screen alignment/rotation
- Add function Sweep2Wake and DoubleTap2Wake in the kernel
- Add script "sets2w" for enable/disable s2w/dt2w function
- Add mod NO S2W in AROMA for those who want to disable s2w/dt2w function
- Removed the big icon 3G and G in statusbar
- Fix 13MPX in stock camera
- Default notification led set to blue
- Different baseband
- Fix low intensity vibration
10/09 – Ver 1.0.0
- first public release
know bug:
- camera stock show only 8MPX, with other app (camera360, google camera etc) u can select 13MPX
- the compass works but is not accurate as on JB
- the vibration is low compared to JB
- ART not work (for now…)
- maybe other…let me know
for enable/disable the function sweep2wake, doubletap2wake and pocket detect i have created a script.
just install a terminal emulator and write:
su
sets2w
and set to 0 what u want to disable
pocket detect use the proximity sensor for disable s2w/dt2w when phone is in pocket (or when the sensor is covered by something)
need this recovery to flash this rom, also need a full wipe (if u update from previous version u can wipe only cache and dalvik)
In aroma installer u can select if flash for zopo 980, 990 or C3
for 980 and 990 there is a 2 variant, A and B (differ only in the rotation of the screen)
try first with the A version, if screen in landscape mode is upside down reflash with the B version
there is also an alternative version with different proximity driver, if proximity sensor does not work try with this
original discussion (in italian): http://www.androidiani.com/forum/zopo-modding/426142-zopo-980-990-c2-c3-c7-rom-kitkat-4-4-2-a.html
※Please make a backup of your device before installing or updating ROM
So, just to be sure:
I installed the recovery update (TWRP 2.8). The Kitkat rom for Zopo 980 is copied to my Zopo C2 sdcard0)
Can I now:
1) boot to TWRP recovery mode
2) Wipe (Factory reset)
3) Install custom rom (zip)
Or did I forget something?
yep – all OK. BUT ALWAYS TAKE BACKUP FIRST IN TWRP !
Then, In TWRP i suggest to do a wipe by TWRP itself. In Aroma you will see also a wipe procedure (dalvik, cache too) : do that also. No problem.
Then, you can choose to install at your choice. You can install and re-install whatever you want. Choose always YOUR type of ZOPO.
Noticed one interesting bug. When inserting headphones with mic they work properly. But headphones without mic don't work at all. Any ideas? Or this problem is present only in my case?
Zopo C2 1/16, rom v1.0.7 rev A, tested in Poweramp
very good rom but battery drain problem, waiting for the solution
Uncheck your automatic screen display and set a fix brightness – might help too.
Hi,
I've been using 1.06 for the past 3 weeks then started getting problems unlocking the phone's screen.
Installed 1.07 yesterday and today I got system force close warnings.
Wiped everything in recovery now my phone is bricked, and I can't get into the recovery.
Tried using SP flash tools but I don't have any scatter txt file…….what do I do?
HELP, thanks in advance!!
http://forum.xda-developers.co.....d.php?t=2775196
Just search for it.This is for C2… Just check your version etc…
Fixed it by downloading original rom from Zopo, thanks anyway
Ok- you can always reflash your phone with your original ROM like you did now .
Your welcome !
Hello, This Rom use Multi-Language or no
Thank you!
Multi
thanks..
hello, im using 1.05 version on 2/32, and battery drain is ok
verry big thx to Paul
Perfect, my device Zopo ZP980 2G/32G and installed ver. 1.07. Rom is multilanguage. Thank you very much… Everythings works…
Hello! I installed 1.0.7 ver on my C2 (4GB, "B" ver) and it works like charm. Do I have to run these two fixes:
1) How to get faster FIX position on GPS (EPO files): http://forum.zopomobileshop.co.....ad-474-1-1.html
2) To install MT GPS EPO Fix app, as well: https://play.google.com/
3) Patch Final after the fix 3G: http://forum.zopomobileshop.co.....ad-208-1-1.html
Anything else?
Hi Paolo,
I've got a zp980 2gb ram / 32gb rom.
Behind the battery it only got a sticker with a "C+"
I started to flash with the A version. Proximity and light sensors were dead… so I reflashed with A-alt… no luck… still dead. Then I flashed B version. Proximity and light sensors worked but got the auto-rotation issue. Tryed the B-alt… same thing. Then I tried the C3 version… everything seems to work, proximity and light sensors, auto-rotation okay…. BUT …. the image in the camera app is upside down… Tried to install 3rd party cams, like lenovo super camera, stock camera from 4.2… still upsidedown…
What version is for my phone then? What can I do? Anyone?
Thanks,
Ricardo