DESCRIPTION
ROM Mobile Landvo L800 – ROM Android 4.4.2
Update Official ROM Landvo L800 version: 111wv82_ht_fwvga_20140809 – KOT49H - Android 4.4.2
| Changelog |
SelectShow |
taoqiong (pull time 2014_08_09)
Bluetooth address the same problem to solve
taoqiong (pull time 2014_08_01)
After the camera focuses default 1.3
|
—————————————————————————————————————————————————————————–
Update Official ROM Landvo L800 version: 111wv82_ht_fwvga_20140610 – KOT49H - Android 4.4.2
| Changelog |
SelectShow |
20140609_e2111wv82_ht_fwvga taoqiong (pull time 2014_06_09)
Switching 4.4 platform
20140422_e2111w_v82_ht_fwvga taoqiong (pull time 2014_04_22)
Enter at # 08 * # * # * # * mode manually write code to solve online movies function keys have been bright lights problem
Color EMEI number of tool changes with (trying to add the version code)
20140408_e2111w_v82_ht_fwvga wuyue (pull time 2014_04_04)
Increased compatible Memory: Toshiba 32 +4 "TT4"
20140303_e2111w_v82_ht_fwvga wuyue (pull time 2014_03_03)
Tp drivers joined TP firmware upgrade file provided by the customer
Next version of the software will not include this feature, please use this version of the software is upgraded TP
20140113_e2111w_v82_ht_fwvga wuyue (pull time 2013_12_24)
Direct use tool to modify and solve * # * # * # * # 33 in handset testing into the problem of slow
20140113_e2111w_v82_ht_fwvga wuyue (pull time 2013_12_24)
Optimize power display problems
Turn off fast boot
20140107_e2111w_v82_ht_fwvga wuyue (pull time 2013_12_24)
Resolved before the change to the pre-set moment reddish problems
Main Menu Default Black
20140104_e2111w_v82_ht_fwvga wuyue (pull time 2013_12_24)
After solving the problem does not start automatically hibernate
Viewfinder striped problem solving gc2035_yuv
20131225_e2111w_v82_ht_fwvga wuyue (pull time 2013_12_24)
Ui instead of the original ecology
Replace the default wallpaper
Add some wallpaper
Main Menu default translucent
20131218_e2111w_v82_ht_fwvga wuyue (pull time 2013_12_17)
Optimization gc2035, resolved: the dark light, surrounded by dark, middle light; against the white walls look greenish;
Optimization fake AF
Automatically start solving the problem
20131212_e2111w_v82_ht_fwvga wuyue (pull time 2013_12_12)
Remove the software from invasive sensors that sense of light useful for virtual TP
After the increase in fake autofocus camera
Audio parameter adjustment as follows: loudspeaker mode max: adjusted 152, loudspeaker mode mic level3: adjusted 178, normal mode sph level6: raised 150
Solution: pattern unlock screen, operator name and emergency dialing a slight overlap
Solution: * # * # * # 33 # mode under former forward / rear camera test items, the screen will automatically restart after quenching
Solution: After the MMS issued, each has received, the machine does not have a delivery report
Solution: connect OTG no response, OTG device status test mode without any display
20131210_e2111w_v82_ht_fwvga wuyue (pull time 2013_12_09)
Add Camera: 5004
Optimization of LCM: LCM: HF_15025_1396_A0
Increase the virtual light perception
Optimization TP
20131203_e2111w_v82_ht_fwvga wuyue (pull time 2013_12_02)
Problem solving gc2035_yuv inverted 180 degrees
20131202_e2111w_v82_ht_fwvga 20131202 wuyue (pull time 2013_12_02)
Camera: hi253_yuv gc2035_yuv gc0329_yuv hi704_yuv
LCM: HF_15025_1396_A0
qhd
Samsung ui
|
Install with SP MDT:
Unpack the archive ****** and archive with the ROM
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose Database Factory menu> Configuration File data source and specify the file MTK_DATABASE.mdb (it is in the folder SP_MDT).
7). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
8). Click File and select the MT6582_Android_scatter.txt file (it's in the folder with the rom).
9). Click "Start all".
10). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer, remove and insert the battery and reconnect it to the computer.
11). After (OK) click Stop and disable any phone.
12). Completed.
—————————————————————————————————————————————————–
Official ROM Landvo L800 version: 111w_v82_ht_fwvga_20140304 – Android 4.2.2
Gapps include – No Rooted
Language support : Multilang
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6582_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
※Please make a backup of your device before installing or updating ROM
Member Info
Yay!!! I've finally managed to do this upgrade and it's great so far!
For anyone who was having trouble, what I discovered is that,
1. You may need to try several different versions of the SP Flash tool – on my 3rd attempt, the Flazshtoolmod UBIFS one worked!
2. DO NOT hit the dowload button….you need to click on the 'Firmware –> Upgrade' button instead.
3. If you have Snappea installed on your PC/laptop and it works okay, you will NOT need to download any drivers from anywhere – your PC/laptop has already installed them when you set up Snappea.
4. As a double-check, if there are no icons on Device Manager with an exclamation mark beside then, your drivers are properly installed and your phone will upgrade just fine. Your device will show as YunOS Phone.
Good luck!
hi to all
if the phone is not detect , you have to see in where com is the phone detected, and edit the:
SPMultiPortFlashDownloadProject.ini
file. Edit:
[Ports]
Channel0=5
Channel1=8
Channel2=21
Channel3=0
Channel4=0
Channel5=0
Channel6=0
Channel7=0
Channel8=0
Channel9=0
Channel10=0
Channel11=0
Channel12=0
Channel13=0
Channel14=0
Channel15=0
[PreloaderPorts]
Channel0=4
Channel1=7
Channel2=20
Channel3=0
Channel4=0
Channel5=0
Channel6=0
Channel7=0
Channel8=0
Channel9=0
Channel10=0
Channel11=0
Channel12=0
Channel13=0
Channel14=0
Channel15=0
put the correct channel. and the phone will be detected.
sorry for my poor english, i am spanish.
Hi, i hope you can help me.
I believe, i have bricked my L800.
I tried to flash with SP_Flash_Tool_v5.1348.00 and with SP_MDT_exe_v3.1336.00.00, but both programs had problems.
flashtool gave me an error message about wrong checksum in uboot, when i tried to load the scatterfile of L800.zip, and SP_MDT made nothing with that scatterfile.
Then i tried this and that (with checksum_ini.exe and other scatterfiles and drivers etc.) and suddenly i became a result, the flsh process ended with the green circle. Igot that result with the rom "Landvo L800", not with "L800", because with "L800" i always had the checksum error, when loading the scatterfile.
But now i have no reaction of my phone, not with normal power on, and not with power on and vol up.
Only if i remove the battery, hold vol up and connect the phone per usb to the pc, then win7 64 shows for some seconds that"Alcatel Single RNDIS Interface". in usbdview is the same shown.
can you please help me?
okango
Hi Okango
Did you do a backup with MTK Droid Root & Tools first?
If you did then it will have made a recovery at the same time and I would try to flash that before doing anything else.
DON'T flash any more roms! You will do more harm than good.
Smae64
hi all
I have found a problem after the upgrade.
if I use the GPS my credit goes down.
this happens with data connection active and also if the connection is inactive.
Someone have the problem like me?
Is possilbe resolve it?
Thanks for your answers.
Enrico
Thats really creazy ! hahaha Thanks for telling me so now I wont use it lol.
guys i need your help
anyone that has suceed to install the kitkat rom 4.4.2
like the nick upwaren87
there is a custom recovery with cwm for landvo l800
here is the link to download it
http://forum.xda-developers.co.....833&page=2
please do us a favor
and make NANDROID backup with CWM
and then upload it to this site NEEDROM.COM
as a zip file in CWM forrmat
then it will much easier and safer to update the rom
Who lost IMEI, use mtkdroidtools
please can someone upload a backup made with mtkdroid tools i bricked my phone and i can recover now
It wasnt hard to do the update if you have knowledge about android .. It is faster with the new 4.4.2 OS . Saves more batery and other stuff.
BUT, its hard to root , gravity sensors not working right but can be fixed.
I think its worth to get it and it has a lot of cool features like the flashlight notification .
PLEASE BEWARE OF THIS ROM PEOPLE!!!
I found a UUPay virus on the Play Store app that's on it which wasn't detected by my AV app – 360 Security.
It was only detected by Eset and I had to sideload a clean copy to overwrite it.
I don't trust the roms on this site any more and suggest that others use them with caution.
You have been warned.
Hi I'm Byron,
It would be nice you did a video tutorial on how to update and rooting the device especially Landvo L800. I would greatly appreciate it.
Excuse my English, I'm Spanish.