- Title: Meizu M3 Note Global ROM
- Listed: June, 2016
- Last modified: 06/05/2016 3:48 pm
- Version: Flyme OS 5.1.3.4G
You must be logged for ROM download.
49368 total views, 8 today
17 Total favorites
Member Info
DESCRIPTION
Official International Firmware:
Note: There are two versions of Meizu M3 Note: M-Series and L-Series. Check your Hardware version before flashing otherwise it will brick your device.
Flyme OS 5.1.3.4G for M/L Series (Change the file name to update.zip before flashing)
Flyme OS 5.1.3.3G for M Series (Change the file name to update.zip before flashing)
Flyme OS 5.1.3.2G for M/L Series (Change the file name to update.zip before flashing)
Flyme OS 5.1.3.1G for M Series
1. Enable root or make sure you have root access. You can obtain root using KingRoot app also.
2. Download and copy the attached global.sh script to root directory.
3. Also, download update.zip file and copy to root directory.
4. Search in google and download any Android Shell Terminal Emulator and install. Launch Android Shell Terminal Emulator and input following commands:
su
(wait till $ sign changes to #. If it doesn't change, then you don't have root access)
sh /sdcard/global.sh
5. The script will backup old phone id and will replace by new id and then it will reboot automatically.
6. Upon reboot it will go to Recovery mode. In the recovery mode, you MUST select both System Update and Clear Data, and proceed.
7. Wait until the update completes and you will have international firmware installed.
Note: You can use ADB to execute above commands but you will need to enable USB debugging mode (Settings>>Accessibility>>Developer Option) and required drivers installed for access via ADB
CREDITS TO 4PDA.RU
※Please make a backup of your device before installing or updating ROM
oood
It is very good!Make sure to have run the internationalisation script some time before that.
How?
So I flashed a Firmware…. Screen is right side up.
Google services seemingly working fine.
But for some reason, Front camera is not working. Any solution to that ?
when I press the switch camera button in camera, there is the animation of flipping but it still shows rear camera.
Same. In 5.1.3.2G, my front camera is not working. I try to flash 5.1.3.4G, but my mobile said: the formware is too old.. Any idea?
thanks a lot
after i flashed my m3 note with 5.1.11.0G, the choice 4g network mode not shown, how to show 4g network mode in setting sims and network?
My OS version is flyme 5.1.3.6A, why can not flush Flyme OS 5.1.3.4G ? ,it is say that the version is too old.
And how to Confirm it is M or L ?
ths!!
Já tem uma versão global oficial mais recente para o Meizu M3 Note: 5.1.11.1G.
https://downloads.meizufans.eu.....able/5.1.11.0/g
Resolveu o problema da camera frontal e outros pequenos "bugs".
up up up need firmware
my meizu m3 has a PASSWORD but when i flash it with update.zip … still the same poblem .. still asking me the PASSWORD plzzzzzzzz heeeeeeelp
Same problem