- Title: Miui v5 Rom Revolution
- Listed: December, 2013
- Last modified: 04/29/2014 5:36 pm
- Version: 4.4.18
You must be logged for ROM download.
53383 total views, 5 today
126 Total favorites
DESCRIPTION
Miui Rom Revolution
This is the version to install from CWM recovery
valid for all models of Star N9500 MTK6589
The problem with Lcd and Camera drivers will never be a problem.
First in the world I solved the problem.
You only need to know before installing what is the combination of Lcd driver – Camera of your mobile phone. Know that during the setup wizard, the installer will ask you what is your driver combination.
Links to everything that is required for proper installation can be found in the following paragraphs.
Features of the Miui Rom Revolution
The beauty of Miui with the power of my work
The ROM is the most beautiful in the world, ported from an official Miui Rom
I adopted a new kernel, modified to make the ROM even more powerful.
The ROM is multilingual
Follows a list of the main features of the Miui Rom:
* Root
* Deodex
* Kernel (boot.img) modified with real support init.d
* Zipalign at every boot
* Sqlite optimization at every boot
* Very smooth, with no lag
* Absolutely full app in the system, it was not removed anything from the original version
* Extremely stable
* Gapps already installed
* Optimized to the maximum
* Original Boot Animation
* Original Logo initial
* Build.prop optimized
* Gps.conf optimized
* Scripts and Tweaks listed in the following section
Scripts & Tweaks
After careful selection and long and patient work, in order to adapt to this device and delete all the conflicts I could insert different and will list only the main ones:
* Adrenaline Engine
* Loopy Smothness
* Geeky Engine
* Net-Fork
* Supremacy
* VelocityTweaks
* SlaidyBoost
* BeatsAudio
* CosmisTweak LightSpeed
WSM Tools: Xposed for Miui
I have inserted in my Miui Rom Revolution a novelty for be able to make many changes to the ROM out on your own in the best way and adapt it to your tastes and needs.
WSM Tools – What surprised MITU is an application that allows you to install modules Xposed on MIUI rom. Without this application (created by Burgerz, a member of XDA) it was not possible to use Xposed Framework (created Rovo89, XDA) on all Miui. For the uninitiated, these modules enable you to make important changes to the firmware ROM, with additional options such as reboot, change audio tracks from the rocker and much more that you will discover by installing this app.
Launch the application, and from the window that opens click Install and then finally reboot. On reboot the application, we immediately see a module already installed, the I-Tools, which is the most important and comprehensive form for this application and only replaces virtually all the others. With a swipe from right to left instead see those available for download.
The installation of these is very simple. Just select what you are interested in and press Download, after installing it as a normal application. Will appear on the main screen, turned off by default. Active it and a pop-up will warn us that will come into operation only after the next reboot. Reboot directly from the application and begin to test it.
The application has been tested only on MIUI V5 and is not on the Play Store.
Introduction to the installation of the Miui Rom Revolution
Before installing the Rom you need to make a backup of your device in case something goes wrong. Do it with MTKDroidTools flashabile with FlashTool.
Those who have already installed the recovery Cwm they can make a second directly from recovery.
For the first, here is a guide to the procedure of backup, for the latest version of MTKDroidTools and drivers necessary for the proper use of the application Backup with MtkDroidTool
Just this already, but if you want here is the guide for the second procedure to install the modified recovery Cwm How to install Cwm recovery
Installing the Miui Rom Revolution
Before installing the Rom is necessary that you know what version of drivers Lcd and Camera is on your device, because the installation with incompatible drivers would inevitably lead the phone to the brick. During the installation process, my Touch Installer you will propose different combinations of drivers Lcd and Camera. Simply indicate which is the your, and the installer will continue its task.
If you do not know what is the drivers combination of your device, you can check it through this easy steps:
* Open the numeric keypad of the phone (as if you have to dial a phone number)
* Enter the combination * # * # 116 # * # *
* A window will open which among the many things listed, will also present the version of your Camera and Lcd drivers.
If this procedure does not work (does not work on all versions of this device) then you just enter in "Factory Mode":
* Turn off your phone
* Holding down the volume down button (be careful! Volume -), press the power
* As soon as the phone is starting, you can leave the power button whilst continuing to hold down the volume button -
* It will open a window with the words "factory mode" followed by one with various items
* You can leave the volume button
* Now the volume button will need for scroll through the menu items
* Go to "version" and enter by pressing the home button (middle bottom)
* Now between the various items that appear on the screen there will also be those of your Camera and LCD drivers (if you do not see scroll with the volume key that are below)
* Note the type of Lcd drivers and the type of Camera Subsense driver
Now we are ready to install the Miui Rom Revolution
You may have already downloaded the zip file from the link above and copied the zip file in SD card.
Restart your device in Cwm recovery and make a backup of your device.
Then always from Cwm perform a full wipe:
-> Wipe data / factory reset
-> Wipe cache partition
-> Advanced -> Wipe Dalvik Cache
-> Advanced -> Wipe Battery Stats
-> Mounts and storage -> format system
-> Mounts and storage -> format EMMC
to make sure you have no problems!
You are ready to install the Miui Rom Revolution from Cwm with the usual:
-> Install zip from sdcard.
Will start the installation process with the touch controls. Be guided by the Touch Installer and when will be asked what is yours drivers combination, simply indicate which is the your from those listed, and the installer will complete the installation.
At the end of this at the request of the installer confirm that you want to reboot into CWM recovery and from here again:
-> Wipe cache partition
-> Advanced -> Wipe Dalvik Cache
Reboot. Upon reboot follow the wizard to set up the language and the basic settings of the phone and then run a new reboot (there are some services that to start, needs a second reboot). And now enjoy!!
N.B. If after installation you notice that the signal of the sim is poor or absent it means that you have to put a different baseband. Simply install one of these patches, prepared by the user freedgt. They are. Zip file to install via cwm recovery. It is a procedure for a few seconds. It is not possible to know first what is the best for vs device, in the worst case you'll have to try them all, and take what will seem to respond better to the radio signal in your area, and your operator.
Here are the links:
- baseband del 19 aprile
- baseband del 14 maggio
- baseband del 17 maggio
- baseband del 21 giugno
- baseband di luglio usually for 8 gb device
Which author of this Rom decline any liability for whatever may happen to Vs device as a result of the flash itself.
If you are afraid, then don't install anything and you will sleep peacefully the night, otherwise you do it at your own risk!
In any case, just do a Nandroid backup before installing anything and every problem should be averted.
Resolution of any problems after the installation of the Rom
I invite everyone to make a backup.
Only if you have done the backup and you are able to restore the device then you can write me relatively few bugs in the rom or any other problem.
So ATTENTION! … You did not do a Nandroid backup? … You are not able to restore the device? … Well, do not write to me, because I will not answer to you!!
Conclusions
Enjoy my work. It's really the most beautiful. Enjoy!!
I have put, too, the link to the CRT recovery version 2.2, which I made for this device. It 's a good recovery full touch. The features in this link https://www.needrom.com/mobile/carliv-recovery-touch-2-2/
P.S. I'm Italian and sorry if I have not written in good English
※Please make a backup of your device before installing or updating ROM











Member Info
with the new version 4.1.4 …
nobody had problems with the device 8gb?
only those with 4 gb have had problems?
I had problems (not starting) with thr 8 gb version
Ciao Olidan perchè con la versione 4.1.4 non mi fa visulizzare il nome del contatto che chiama ma solo il numero
Hello, is it possible to make this ROM for s7189? Or not?
Thanks
I've already answered … yes, I think that it is possible
soon I will make a test
Oh right i thought you answered for someone else
And thanks very much for your effort I appreciate it
If you manage to get anything, please keep me updated
Hey if there are any updates can you list the changes please? And you should make a touchwiz ROM or a 4.4 ROM. You are really good
Thanks
Ciao Daniela, risolto il problema della recovery mi si era cancellata . L'ho rimessa e tutto funzionava.
Ho poi provato ad istallare la tua seconda versione di roma per la precisione questa: 2_N9500_MTK6589_Miui_Revolution_4.1.4_Cwm
ma ho lo stesso problema di limpaio :
l'istallazione dice che è andata a buon fine ma poi quando vado a riavviare mi compare il logo iniziale e poi si blocca su schermo nero c'è qualcosa che non va.
Ok ottimo per la recovery… nel link c'è la mia nuova versione di recovery Full Touch per N9500 prova anche quella…
Per la Miui installa questa versione 3.12.18 pubblicata ed aspetta per gli aggiornamenti… sistemerò tutto nei prossimi giorni.
Daniela
Daniela con la recovery funzionante come faccio a tornare alla 3.12.18?
Avevi un backup fatto?
Allora tra le varie voci della recovery c'è backup/restore -> restore -> il backup che vuoi ripristinare.
Se invece un backup non l'avevi devi reinstallare daccapo
I HAVE INSTALLED THE ROM ON STAR N9500 8GB MTK 6589 BUT I HAVE A PROBLEM WHY 'NOT SEE THE UMTS NETWORK 3ITA. I TRY TO ADD ME TO YOUR NETWORK IN PREFERRED NETWORKS BUT I DO NOT SAVE THE DATA ON THE NETWORK.
Hello,
In settings you can set the data connection to 3g. But only for sim card nr 1
When I change my data to de seconde sim, There's no way to get 3g on that?
And the gps on/of in the pull down menu didn't work. Only after a restart.
well … at least has started