- Title: Mokee 7.1.2 MDSdev
- Listed: June, 2017
- Last modified: 02/28/2018 3:30 pm
- Version: Z7 Max Rom Mokee 7.1.2 By MDSdev (NiGHTLY)
You must be logged for ROM download.
45053 total views, 14 today
78 Total favorites
Member Info
DESCRIPTION
Important
The rom is a port of the Rom Mokee of the Z7 mini. The Mokee center can not be eliminated because many things would stop working.
They will skip updates, but they do not work for this rom.
To avoid updates, disable it in the Mokee center.
NEW ROM: 27/02/2018, Rom complete without gapps.
Some time ago came using a Rom Mokee for our Z7 Max, which worked quite well.
The Rom unloaded it from Needrom and published it "zolDM". It was an official Mokee port of the Z7 mini, but it suddenly disappeared from Needrom and the author stopped supporting and publishing it.
As I think Rom works quite well, I have managed to take it, taking advantage of the work already started, I updated it to the latest "NiGHTLY" and updated the kernel, which is compiled by me, thanks to the sources of "PaoloW8".
I think everything works, if you see something that does not work, you just have to tell me.
Important: Before doing anything I advise you to make backup, so that in case of problems you can restore the rom you had.
Multilanguage, Gapps not included, must be installed separately by recovery
Rom Updated. Last security patch. (05/08/2017)
Upload update every 4-5 days.
Installation:
* Installed by means of TWRP recovery.
* Download the rom file and the gaps, save them in SD or internal memory.
* You start in recovery mode.
* Make wipe of everything, less of the internal and external memory. If you make the internal wipe, then you will have to save the rom in the SD.
* Once made the wipes, you install the Rom.
* When installation is complete
* Install the Gapps
* Once finished installing, reboot
To improve the Wi-Fi and network signal, install the Baseband 389. It is installed by recovery, without wipes.
The two sim have LTE. In order to operate the Sim 2 LTE, you must set the Sim 1 as "GSM only", put in airplane mode and then re-enable.
Gapps
If you want the most updated gapps, just go to this page: The Open GApps Project
You always choose: ARM / 7.1 / the module you want, I usually choose the smaller one that is the peak.
Updates (always have a backup handy)
Important: Updates need to be installed in order. After installing an update, you have to restart to install the next one.
The updates that appear to the terminal can not be installed, they will give you error, they are also for the Z7 mini. I do not delete it because if you click on them you comment the changes introduced, which in most cases do not matter.
Those of this terminal, I will put them here to install by recovery.
Here I will post the changes introduced by the dev of mokee, or that I can contribute myself. They are installed by recovery and do not affect anything you have, they are like a kind of ota.
The Mokee changes can be seen here: ChangeLog For MoKee Open Source, many are only subject to translations and some improvements, although sometimes they may not improve on the above. It is not a stable version and there are variations daily, although I will hang the updates once a week, so that it is not too heavy.
Remember to make a copy, in case you do not like it you could return to the previous thing, although from one to another update they are solving the subjects.
Thanks: Paolow8, zolDM, team Mokee open source
Support: https://www.movilesdualsim.com/tema/z7-max-rom-mokee-7-1-2-by-mdsdev-nightly.174552/
If you want you can help me with a little help on Paypal
※Please make a backup of your device before installing or updating ROM
CRdroid is built by me and I think it works fine.
Here are more roms for me:
https://www.movilesdualsim.com.....-recovery.1169/
Lineage, RR, AoKP; CRdroid.
I would install recovery again and start from scratch
To install recovery use this tool
https://www.needrom.com/downlo.....ne-tool-v1-1-0/
When you have recovery installed, you can install this other
https://www.movilesdualsim.com.....-mdsdev.165546/
Then you can use the rom you want
You also have here a long list of different Baseband to test.
https://www.needrom.com/downlo.....ad/baseband/
It is good to backup before making a major change, in case it does not work as we would like.
In my case I have no problems and note better performance with the change of baseband
Do these ROMs have OTA support?
Thanks
Which baseband do you normally use?
Using the same ROM since Android 5.1 but battery life is disappointing. My fiancee has an iPhone 5S and her phone lasts more than mine and she's playing and chatting much more than me. I've noticed when opening fullscreen apps like games or videos the phone gets hot very fast and battery drain is very visible. Anyone has any tips or maybe another ROM to suggest?
No, they are a port. I put here an update every 4-5 days
25º update ready
Unfortunately, I'll have to look out for some other rom. Just cant flash OTAs due to Error 7 in TWRP. Tried all recoveries, reflashed the rom twice but the error remains.
I do not understand what error you have, nor why it happens to you. Everything is tested and it works.
I understand that you use the right twrp, you make the wipes.
You have to install everything separately.
first the rom and reboots. When you boot, re-enter and install update 1, reboot, then go back to recovery, install update 2 and restart. That way, one behind other.
Try this recovery:
https://www.movilesdualsim.com.....-mdsdev.165546/
I modified the update 1, you have it at the end. install the rom and test if you install it.
i have a proximity sensor problem
on call display doesn't off
firmware: MK71.2-nx505j-201709111105-NIGHTLY
gapps:micro 7.1
It is a problem that occurs in many rom CM. You have to give the power button.
They are not perfect roms, sorry.
Update 26 Ready
@MDSdev, can you please post this recovery here on needrom, as it asks for registration in Italian on the site which I cant understand
https://www.movilesdualsim.com.....-mdsdev.165546/
After installing this ROM i realized that cant get an Uber. Error appear when the app tried to find a driver.
Your Uber works fine?
I did not have the uber app installed. I just installed it and it works without problems.
The proximity sensor doesnt work, so the phone doesnt turn of during calls. Any advice?
The proximity sensor works. sometimes when you end the call if you can not turn it on, you have to give the power button.
It is common in 7.1.2, if it is very important for you you can try another rom.
27 update ready