• Title: MPAI 809T
  • Listed: 01/07/2015 1:33 pm
  • ROM Version: Android 4.4.2
  • You must be logged for ROM download.

Overall Rating : 9

11033 total views, 1 today

714 Total downloads



Author adMember Info


For MTK6582 1/4GB version only!
LCD driver 0-TDO_HD0499K70137

KitKat stock ROM 20140719_e2109v82_hydy_hds with slight modifications:
- root access
- data partition resized to 2.0GB
- fixed external SD card limitations
- fake hardware specs removed
- chinese crap removed
- TWRP included

- Backup your NVRAM first! You possibly will lose your IMEI!
  Run MTKDroidTools.exe.
  Click button "IMEI/NVRAM".
  Click button "Backup".
- Make sure you have ADB drivers installed and working.
- Run SP Flash Tool.
  Open Scatter-loading File "MT6582_Android_scatter.txt".
  Click "Firmware->Upgrade".
  Connect phone without battery to USB port.
  Wait for green circle.
  Disconnect phone, insert battery and power on. Have fun!

If your IMEI is gone, restore NVRAM using MTK Droid Tools.

Share Button

※Please make a backup of your device before installing or updating ROM

25 Responses to“MPAI 809T”

  1. rerosku

    Posts: 7


    Thanks, will save this for future needs :)

  2. 06/05/2014
    Posts: 7


    please make sure all necessary images are checked to be downloaded for "Firmware Upgrade"  

  3. 04/22/2014
    Posts: 2

    United States

    Try ti install this firmware w/o success. After 6 seconds SP tool says BROM ERROR 5007, and after this attempt, phone not switching on. What i'm doing wrong? May be there are some little tricks to flash this version properly?

    • 07/06/2013
      Posts: 37


      You'll have to use a different version of SP Flash Tool. I recommend SP_Flash_Tool_v3.1328.0.183.

  4. 06/05/2014
    Posts: 7


    MT6582_Android_scatter it is necessary to leave the original

    • 04/22/2014
      Posts: 2

      United States

      I used scatter from unpacked folder 809t_KitKat_data2.0GB.7z. Exactly this one you mean?

  5. R18fraga

    Posts: 4


    Bom dia!

    Friend .. Can you help me with the error below ..
    When I try to do the IMEI BKP the following error appears!

     — ERROR  :dev/radio/pttycmd1 inaccessible , should be  Root Shell
     — ERROR  :pttycmd1 device NOT found!


  6. R18fraga

    Posts: 4


    Amigo o Erro persiste.


    ATTENTION! Requests for confirmation on the device screen are possible! 
     — ERROR : file  adbd not  install !

  7. 06/17/2013
    Posts: 10


    Hello, I have poor battery performance. Any experience others?

  8. 06/17/2013
    Posts: 10


    I tried already, but has no result. I mean does it caused too high power comsumption?

    • 07/06/2013
      Posts: 37


      The phone's battery is quite small, so battery life isn't very impressive. My phone runs about 2 days on normal use (dual sim, wifi disabled, no messenger in use).

      My other phone Amoi N850 runs about 5 days.

  9. 08/19/2014
    Posts: 5

    Slovakia (SLOVAK Republic)

     what i am doing wrong ??? 


    when  click firmwere upgread it ask me te to check all files – when i do it it gives me the other message



    • 07/06/2013
      Posts: 37


      Open MT6582_Android_scatter.txt.
      Find "partition_name: CACHE  file_name: cache.img  is_download: true".
      Change to "is_download: false".
      Find "partition_name: USRDATA file_name: data.img  is_download: true".
      Change to "is_download: false".

      Save MT6582_Android_scatter.txt.

      Try again.


  10. 08/19/2014
    Posts: 5

    Slovakia (SLOVAK Republic)

    ok i have try it – i had problem to give it in but after that i was happy it was working OK but only 1 hour after that telephon rebot and cant start it again just welcom screen and again aagain i cound go to make reset nothink :/


    i have tryed yours : 

    • itle: MPAI 809T
    • Listed: 03/29/2014 12:10 am
    • ROM Version: ROM Android 4.3.0

    i hope it will be good 


    but i wanted 4.4

Leave a Reply

You must be logged in to post a comment.